I have one inherited from my dad in perfect condition. Craftsman Sears and Roebuck purchased during the 1950 era complete with all the blue steel bits. Most every hand tools he had were Craftsman as with most everything else from from Sears like clothes, furniture, gardening tools. etc.
I've found that those rubber bungee-cords, the black solid-rubber ones with no cloth cover, make a good grip-guard for when you need to get a tight hold on something without scarring it up. Just have to pick up a broken one some place, I've found 'em in the road a time or two, and cut to length! Used a piece of one I found in a chicken-coop when I was taking apart an air-sander with a rusted-on inner nut. Took a lot of heat and penetrating oil too, but it came off in the end! Nice thing about the rubber, it'll burn a bit but it won't melt like anything plastic would. Great save! It's functional and it's shiny enough for me!
Thanks! It took trying several other methods before I settled on that. Leather burned and was cut by the teeth of the vice-grips too easily, pieces of aluminum off a heat-sink placed where the air-vanes went helped but weren't enough on their own... It was a process! XD
EDITED: The knurled lock ring on the handle/bit storage has a steel ring that locks in the groove on the shaft under lock ring to hold the bit storage closed.. That steel lock ring died decades ago from the rust monster. That was not going to be a save no matter how careful you were. Thanks for the video. I just picked up a 41Y for my off-grid tool kit. I finally got the chuck off.after watching your video. it was a very tight fit. I got everything cleaned, lubricated with Tetra teflon grease and Tetra teflon oil emulsion from my gun cleaning supplies. Re-assembly was not easy; I had trouble getting the holes for the chuck retaining screw to align so the screw would seat all the way down, but finally got it. It operates very smoothly now. The 41Y went right to work drilling the holes for hinges, a magnetic catch, and a cabinet handle on a small access door for water shut-off valve. It is much easier to get the pilot holes in the exact location compared to using an egg-beater or bulky cordless drill in small work areas. I bought the set of 8 replacement bits from Amazon, 1/16th” through 1/8” by 1/64ths that appear to be make in China, though there is not a country of origin on the packaging. The bits are nice with some gold engraved letters on the shank for the size and worked very well.
Totally awesome restoration on the no. 41 pushdrill Magdad! What a tough project, but you perseviered. I have a Craftsman DD 4221 U.S.A. pushdrill similar to the no. 45 that has worked well for years. I wonder whether it was made by Stanley as it looks almost identical to the no. 45. 😮👍😊
North Brothers tools are some of the most durable and innovative tools I've seen. I use them daily. That 41 model resided in the kitchen junk drawer for those occasional holes my wife needs to hang things on walls..
Heck yea. Nice job. Yankee drills are handy as the dickens. Toss it in a tool bag for the car or for around the house. Instant holes with no electricity. I love these things. Would this be fun practice for nickel plating? Thanks for the video. Appreciated.
Thanks George! Push drills are as handy today as they were 80 years ago. I am not a fan of nickel plating on tools. It is too thin and fragile - better for decorative items.
That was great job. When my father in law died 5 years ago I found one like it in his garage it was still in the box. I don’t think it was ever used. It’s in my shop now
I am so glad I found this video. I just came across one of the Yankee 41 push drill when going thru my dad's old tools (he passed in 1989, and I am just going thru things!). It isn't rusty but it doesn't work, so now I know how to get it cleaned up and hopefully functioning again.
Still have my dads model 41 in a drawer in the garage. Man O man, first the screw driver and now this. These tools were so far gone, I have to admit, I would have given up. You brought them back to life and they will probably last forever now. Amazing job.
Wow another wreck brought to life! I like to pause after your introduction and think about how I would proceed. Then I watch the rest of your video. I learn so much that way. Love the assembly music! Thanks
These things have been around forever. My dad had one, never used it. I remember going through the Kennedy toolbox looking for the special bits that stored in the handle. This was a newer one though with a see through plastic handle with a screw on cap and a small selector switch.
Back in the early 1970s when I was in the US Air Force my job was installing telephones and business systems. We did a lot of securing telephone cables to walls and equipment panels with claps and screws. Were were issued a Yankee Drill just like the one you rescued from the 3 buck Craftsman 6500 tool box. I don't know if the Air Force or DOD had a contract for Stanley to make the old style or if there was a deep stock of them. Back then there wasn't battery power drills and drivers so Yankee drill and a screwdriver is how we attached stuff to walls. I am sure the early Yankee Drill was preferred because other than the bits it was all one piece. It wouldn't have been good to lose the cap off your Yankee Drill and not be able to securely store the bits. You have to admit it is a great tool. I picked one up at a yard sale about 30 years ago that was pretty rusty and I never did anything to except clean it and oil it. It had like three bits so I bought a replacement set at the hardware store. Maybe its time to pretty up the Yankee Drill. Another fine video Mr. MagDad.
I used to work for the phone company and used this tool for over 30 years before battery powered tools it worked like a charm and had various drill bits in the handle and sometimes I used it as a hammer nice video 357magdad...
Wow! That was a lot of work, but as always you did a fine job. I look forward to your uploads every week " Sunday with Magdad" Love seeing old tools get a new life. Like I said before " The best $3.00 you spent on that tool box". Thanks again.
I have a number of those push drills I have collected and they are waiting to be worked on, I know some are not going to be much good for for other than parts down the line. Thanks for the video sir, excellent rebuild.
Having the spare handle was 'pulling the rabbit out of the hat'! for sure. Nice job. I am suprised that you didn't lube the helix with anything. Super Lube Maybe?
I have 5 or 6 of those. Most are marked ( BELL SYSTEM ) You did a great job of saving that one. I live in the Pacific Northwest and have found a lot of Bell System tools over the years. Several of mine are marked No. 41Y.
I think i have one of dads old ones in my garage! Brings back memories of using it on random stuff when I was a kid. What a wonderful job you did on that!
Nice job! I have my Grandfather’s Yankee drill. It works but could use a tuneup. Now I know how to disassemble it. Without a spare handle, I thought you could use a small hose clamp to hold the handle in place.
Nice! I either find these like almost new or totally worn out, never rusted like this one. Cool to see it functional again. My collection was inspired by your videos after finding about 25 bits in a $.25 bin at a flea market. I bought every bit she had and then had to find drivers. I just blame you when my wife rolls her eyes at another purchase!
@@357magdad Not where I need them to work but I love them nonetheless. I tried them at my work but they just don't work. I may send you my worn out ones to see what you can do with them.
I have a push drill that's very similar to this, made by Craftsman. Got it from my Uncle Robert when I was a kid. He was a belly gunner on a Navy PB4Y (Naval version of a B-24 Liberator) during WWII but, I only knew him as a cabinet maker. The way the bits come out of mine is very different from the way it works on the one shown here. My heart skipped a beat watching this restoration. On mine, the pin you drove out of the top of the handle, that pin, on mine, is a spring loaded detent. You push it in and the top twists off after a short turn so you can pull the bit drum up to get at the bits inside. When I saw you hammering on that pin, I thought, "Wow, this guy is an idiot and is gonna eff-it up". But, thankfully, I was wrong. Anyway, nicely done.
I've seen the Craftsman style push drills, but never had one completely apart. I think Goddell Pratt made the push drills for Craftsman. The bits are different and not interchangeable with the Stanley Yankee.
Fantastic rescue. I like the way you are forging your way through that toolbox and bringing these old neglected tools back to life. This tool is very useful now. It's amazing that it had its various drill bits. Nine times out of ten they would probably be missing. Judging by the appearance of the bits, this tool looks like it was intended for delicate or light duty work. I'm really glad your stash saved the day. I wondered what you would do with those frozen threads. This video is a great lesson in being patient with your restorations. Thanks
Looked like hard work and a pleasing result (lucky about the replacement part). I think when you repair something like a push drill it's about trying to restore the essence of the object rather than do a perfect restoration. I love the tool but truly relieved i don't have to rely on it and its bits to drill holes. 😢
Incredible restoration and tutorial. I'm glad that you had the spare parts handy. I tell my wife that I don't like throwing things out that might be useful. You have proven my point in spades. Perhaps you should call that push drill your Lazarus drill. I only recently came across your channel and found it truly interesting. Reminds me of my grandfather's tool chest. More, please.
I really appreciate this video. Many would not show the struggle or failures. I also like that you kept going and got it working. A very realistic restoration of an abused tool. Keep up thw good work.
Great effort MagDad. Your skill level and patience exceeds mine but your videos definitely inspiring me to at least try to breathe new life into old tools! Thanks for the gratifying content!!
Hi Magdad , Just like mine I got in the Old Craftsman Tool chest deal at the flea Market . Mine Is A Little different , not sure of the maker of mine. Mine Was Rough too. Nice job 👍
I have had some pretty good success using vibration from a air chisel but not everything. I've got a couple snap-on tools made specially for that a socket wrench and a screwdriver set .. but even a good snap-on man won't know what your talking about when you ask..but they're great ..
Well simply amazing…very interesting tool….I see it fought you , but isn’t that more satisfying in the end , I think so….very impressive resto…well done ….🇬🇧🇺🇸
Unbelievable! You busted your ass on this one! Have you seen guys nickel plating stuff in other restoration videos? I’m curious about it and how durable it could be. The nickel on the brass seemed to not necessarily protect it, but it was probably deep in rusty water for a while to etch the shaft the way it did. I know some guys go insanely overboard with restorations, getting things to mirror polished madness. To me, I am more likely to use a tool if it’s already showing use and character and if it was a gleaming mirror, I probably wouldn’t use it for fear of messing things up. What do you feel about it?
Thanks Joe! I'm not a fan of nickel plate. It is a very fragile and thin coating. In my opinion it is good for jewelry or something ornamental, but not a hand tool.
@@357magdad you can take nickel plating off with hydrochloric acid, doesnt take a lot and can be sourced relatively easily. Can neutralise it after by dipping it in water mixed with baking soda :)
For me it's a case by case thing ... I do use some of the stuff I've cleaned up but most I don't..only because I have better lol .. but to me I also think the scars tell a story of service... and on some the patiena adds character...
Found I just like it started cleaning it up the small screw on the handle is tough to remove I'll keep trying but your video is helpful now I know what I'm getting in too thanks
@@357magdad very helpful but I can't unscrew the small one I seen that you drilled the screw out but I might not be necessary for me to do that. Anyway thanks for all the information bro appreciate it ht
I have one or two of those.hand drills,mine r a little differant.the cap on the Handel has a hole on one side of the cap,the bits slide out one by. One as you turn the cap.still use it ,
Nice work! This one clearly didn’t go your way but glad you were able to make it work and look good, too. And of course save the bits. Those spoon bits alone are worth a mint! Good video!
I have one inherited from my dad in perfect condition. Craftsman Sears and Roebuck purchased during the 1950 era complete with all the blue steel bits. Most every hand tools he had were Craftsman as with most everything else from from Sears like clothes, furniture, gardening tools. etc.
My folks bought a lot of stuff from Sears too! The push drill is still a handy tool today!
I've found that those rubber bungee-cords, the black solid-rubber ones with no cloth cover, make a good grip-guard for when you need to get a tight hold on something without scarring it up.
Just have to pick up a broken one some place, I've found 'em in the road a time or two, and cut to length!
Used a piece of one I found in a chicken-coop when I was taking apart an air-sander with a rusted-on inner nut.
Took a lot of heat and penetrating oil too, but it came off in the end! Nice thing about the rubber, it'll burn a bit but it won't melt like anything plastic would.
Great save! It's functional and it's shiny enough for me!
I like your grip guard idea!
Thanks! It took trying several other methods before I settled on that. Leather burned and was cut by the teeth of the vice-grips too easily, pieces of aluminum off a heat-sink placed where the air-vanes went helped but weren't enough on their own... It was a process! XD
I love that re-assembly polka!
Mrs Magdad and I thought it fit the sped up footage!
Hooray!! Tha mighty MAGDAD WINS AGAIN!!!🙌👏👏👏👏
That push drill was in rough shape!
The satisfaction of Winning and Fixing it is worth a Million Bucks.
It was pretty satisfying to get it running again!
EDITED: The knurled lock ring on the handle/bit storage has a steel ring that locks in the groove on the shaft under lock ring to hold the bit storage closed.. That steel lock ring died decades ago from the rust monster. That was not going to be a save no matter how careful you were.
Thanks for the video. I just picked up a 41Y for my off-grid tool kit. I finally got the chuck off.after watching your video. it was a very tight fit. I got everything cleaned, lubricated with Tetra teflon grease and Tetra teflon oil emulsion from my gun cleaning supplies. Re-assembly was not easy; I had trouble getting the holes for the chuck retaining screw to align so the screw would seat all the way down, but finally got it. It operates very smoothly now.
The 41Y went right to work drilling the holes for hinges, a magnetic catch, and a cabinet handle on a small access door for water shut-off valve. It is much easier to get the pilot holes in the exact location compared to using an egg-beater or bulky cordless drill in small work areas.
I bought the set of 8 replacement bits from Amazon, 1/16th” through 1/8” by 1/64ths that appear to be make in China, though there is not a country of origin on the packaging. The bits are nice with some gold engraved letters on the shank for the size and worked very well.
Thanks for watching Charles! Push drills are still handy to have around the shop today!
What kind of maniac does not like saving nasty tools. Great video.
The ones that seem too far gone are the most fun to bring back!
Totally awesome restoration on the no. 41 pushdrill Magdad! What a tough project, but you perseviered. I have a Craftsman DD 4221 U.S.A. pushdrill similar to the no. 45 that has worked well for years. I wonder whether it was made by Stanley as it looks almost identical to the no. 45. 😮👍😊
The No. 45 is my favorite model! It is my go-to cordless drill.
North Brothers tools are some of the most durable and innovative tools I've seen. I use them daily. That 41 model resided in the kitchen junk drawer for those occasional holes my wife needs to hang things on walls..
Thanks Shannon! Yankee push drills are as handy today as they were 100 years ago. I have a No. 45 in my shop that I use all the time.
Good save on this one! It was a goner .... lives to drill another day.
Thanks Jim!
Heck yea. Nice job. Yankee drills are handy as the dickens. Toss it in a tool bag for the car or for around the house. Instant holes with no electricity. I love these things. Would this be fun practice for nickel plating? Thanks for the video. Appreciated.
Thanks George! Push drills are as handy today as they were 80 years ago. I am not a fan of nickel plating on tools. It is too thin and fragile - better for decorative items.
That was great job. When my father in law died 5 years ago I found one like it in his garage it was still in the box. I don’t think it was ever used. It’s in my shop now
Nice! I've only got one with an original box.
That was like a mission impossible episode, your mission Jim, should you decide to accept it… 😂😂😂
Great job!
Thanks David! It felt like mission impossible a couple times!
Disagree in one respect; it IS beautiful...a beautiful recovery. Congratulations!
Thanks Larry! I'm glad I was able to get it working again!
Nice recovery and glad you had spare parts to bring it back to life
Push drills were one of the first vintage tools I collected and cleaned up so I have a box of spare parts.
The best three bucks you ever spent. Great job!
That tool box was like a treasure chest!
Nice cleanup. I'm glad the loss of those rusted threads wasn't catastrophic.
Thanks Sean! I'm glad I had a spare handle!
I am so glad I found this video. I just came across one of the Yankee 41 push drill when going thru my dad's old tools (he passed in 1989, and I am just going thru things!). It isn't rusty but it doesn't work, so now I know how to get it cleaned up and hopefully functioning again.
I hope you get your dad's push drill working again Roger!
I gotta admit it Bud I wasn't giving that much hope!! Well done!!☻
Thanks RoadKing! I was glad I got it running!
Magda that was awesome 😃
Thanks Tim!
Still have my dads model 41 in a drawer in the garage. Man O man, first the screw driver and now this. These tools were so far gone, I have to admit, I would have given up. You brought them back to life and they will probably last forever now. Amazing job.
I have my dad’s model 41 also!
Thanks Joe! A Yankee push drill is a handy to have around the shop!
I kept expecting you to throw in the towel, but you kept at it. Nice work!
Once I got the bits out, I considered stopping. I'm glad I persevered!
HA!!! THE POLKA music GREAT!!!! 'ROLL OUT THE BARREL'!!!!! Kept going through my head!
Mrs Magdad and I have fun picking out the tunes!
You really outdid yourself this time MD. Really nice job on this one. Thanks for sharing.
Thanks Sooch! I'm glad you enjoyed the video!
Wow another wreck brought to life! I like to pause after your introduction and think about how I would proceed. Then I watch the rest of your video. I learn so much that way. Love the assembly music! Thanks
Thanks Tony! I paused a couple times myself on this project!
These things have been around forever. My dad had one, never used it. I remember going through the Kennedy toolbox looking for the special bits that stored in the handle. This was a newer one though with a see through plastic handle with a screw on cap and a small selector switch.
Push drills are still useful today! I just used mine yesterday to drill a pilot hole for a screw hook in my shop!
Nice work!..that thing was a mess....that was pretty cool you had that spare Handle :] Thumbs Up!!
Thanks D&R! I've got a stash of push drill parts and springs.
I was not expecting this would come back. I am amazed you had a spare handle. Looks and works terrific now. Well done.
Dave.
I have a box of spare parts and extra springs for push drills. They were one of the first tools I started collecting and cleaning up.
Back in the early 1970s when I was in the US Air Force my job was installing telephones and business systems. We did a lot of securing telephone cables to walls and equipment panels with claps and screws. Were were issued a Yankee Drill just like the one you rescued from the 3 buck Craftsman 6500 tool box. I don't know if the Air Force or DOD had a contract for Stanley to make the old style or if there was a deep stock of them. Back then there wasn't battery power drills and drivers so Yankee drill and a screwdriver is how we attached stuff to walls. I am sure the early Yankee Drill was preferred because other than the bits it was all one piece. It wouldn't have been good to lose the cap off your Yankee Drill and not be able to securely store the bits. You have to admit it is a great tool. I picked one up at a yard sale about 30 years ago that was pretty rusty and I never did anything to except clean it and oil it. It had like three bits so I bought a replacement set at the hardware store. Maybe its time to pretty up the Yankee Drill. Another fine video Mr. MagDad.
Thanks Michael! Another viewer commented that he has push drills marked Bell System. They were handy tools 80 years ago and still handy today!
Wow, just wow. So many problems overcome.
Thanks Gary! This one was a battle!
I used to work for the phone company and used this tool for over 30 years before battery powered tools it worked like a charm and had various drill bits in the handle and sometimes I used it as a hammer nice video 357magdad...
Yankee push drills are as handy now as they were 100 years ago!
ua-cam.com/video/QzNjNc0fmBE/v-deo.html
Wow! That was a lot of work, but as always you did a fine job. I look forward to your uploads every week " Sunday with Magdad" Love seeing old tools get a new life. Like I said before " The best $3.00 you spent on that tool box". Thanks again.
Thanks John! That $3 toolbox is like a treasure chest!
I have one of those. Was my grandfather's . Still works and in much better shape. Nice to see your restoration.
It is cool that you have your grandfather's push drill! They are still handy tools today!
It’s guys like you, who will be the reason these tools still exist 100 years from now! Outstanding job!
Thanks! Cleaning up old tools is fun!
That was a fine cleanup. It seems that this was your most difficult cleanup so far. Good job.👍
Thanks Frank! I've had these apart before, but this one really fought me!
I have a number of those push drills I have collected and they are waiting to be worked on, I know some are not going to be much good for for other than parts down the line. Thanks for the video sir, excellent rebuild.
Thanks Terry! I'm glad I had a spare handle for this project!
Having the spare handle was 'pulling the rabbit out of the hat'! for sure. Nice job.
I am suprised that you didn't lube the helix with anything. Super Lube Maybe?
I've got a box of push drill spare parts. I added oil in the oil hole. It drips directly on the helix.
WOW! Nicely done Magdad ! Thank You for sharing!
Thanks Jack!
another great episode of the world of rust...endless...but enjoyable...love it...
Thanks Uncle Black! I thought it was a goner!
It looks good and it works good Never worry about the bad spots
It is difficult to get the nickel plated tools looking new again without re-plating.
I have 5 or 6 of those. Most are marked ( BELL SYSTEM ) You did a great job of saving that one. I live in the Pacific Northwest and have found a lot of Bell System tools over the years. Several of mine are marked No. 41Y.
I think the 41Y models are more modern versions of the 41.
Excellent post! Yes, my dad was a Bell System employee (he worked as installer) and I inherited two of his Bell-issued Yankee drills.
You've done a wonderful restoration. The Stanley Drill is really looking great.
Thanks! I was happy to get it working again!
That was one of the most amazing restorations I have seen you do!
Wow! Thanks Chris! It was a fun challenge!
Good video again. But the best part was the Manic Polka 😂. Loved that.
Thanks Kim! If you're gonna play polka, it might as well be manic polka!
I think i have one of dads old ones in my garage! Brings back memories of using it on random stuff when I was a kid. What a wonderful job you did on that!
Thanks Aaron! I remember using my dad's push drill when I was a boy!
Awesome job Magdad! You did better than all the Kings men 😄
Thanks Stan🤣
Well Done !
Thanks Kris!
The impossible became possible...
Great job...I have the same one that was my Dad's it's in good shape and now I know how to take it apart 👍 😀
Thanks Chuck! It was quite a challenge!
Great job on the knife restoration! I could have lived without the beer porn, but you do wonderful work, so I guess you earned it!
Thanks for watching Pat! Your comment has me confused. This video has nothing to do with knives. Your "beer porn" comment" is also a mystery to me.
Outstanding episode! Your just next level! Enjoyed it..heck, I thought that one was a gonner forsure! Excellent Magdad!
Thanks Vic! Chuck though I was wastin' my time!
I didn't thought you would be able to save it. Nicely done, great work as always! Take care!
Thanks 2/3! It fought me the whole way!
Determination+Skill+Good Music= Success & a Good Video. Well done MagDad!
Thanks Hal! I'm glad you enjoyed the video!
Nice job! I have my Grandfather’s Yankee drill. It works but could use a tuneup. Now I know how to disassemble it.
Without a spare handle, I thought you could use a small hose clamp to hold the handle in place.
Thanks Bill! I hose clamp might work!
Love this Push Drill! I have one and I love it! Very handy little tool :-)
Push drills are as handy to have around the shop today as they were 80 years ago!
Nice! I either find these like almost new or totally worn out, never rusted like this one. Cool to see it functional again. My collection was inspired by your videos after finding about 25 bits in a $.25 bin at a flea market. I bought every bit she had and then had to find drivers. I just blame you when my wife rolls her eyes at another purchase!
And I though ScoutCrafter was the only enabler! Push drills are just as handy today as they were 70 years ago!
@@357magdad
Not where I need them to work but I love them nonetheless. I tried them at my work but they just don't work. I may send you my worn out ones to see what you can do with them.
What a wreck! I am impressed with how you got everything apart and working. I have seen rusty tools before but not like this. Thanks for sharing this.
Thanks John! It was a challenging project!
I can't believe you got that running so well after what it started as. Really nice to see every component taken apart. Awesome Job!!
Thanks ScoutCrafter! I was happy to get it running again!
That was in rough shape! Looks really good😀👍
Thanks YDOC! It really fought me! Reminded me of that front fender project of yours!
Great tutorial on the anatomy of the Stanley 41 push drill. It will come in handy when I do mine. Thanks Magdad!
Thanks Christopher! Check thi video for more historical info on Yankee push drills:
ua-cam.com/video/QzNjNc0fmBE/v-deo.html
That was a real challenge! Great Job!
Thanks Bill! I really just wanted to retrieve the bits! I'm glad I kept going!
@@357magdad it worked out! Nice work!
Very well done. You saved a useful tool.
Thanks Jess! I just wanted the bits, but I got carried away!
Excellent work, loved the journey of this restoration! 👍😊
Thanks Lila! I'm glad you enjoyed the video!
Bravo dude! I've never seen one of those taken all the way apart! Best tool video I've seen all week!
Thanks! I'm glad you enjoyed the video!
Very nice! That was a tough one. You got it done. Thanks 😊 🙏
Thanks Mike!
🙇♂️ Full respect. Resto and film, superb.
Thanks Juan! I'm glad you enjoyed it!
I have a push drill that's very similar to this, made by Craftsman. Got it from my Uncle Robert when I was a kid. He was a belly gunner on a Navy PB4Y (Naval version of a B-24 Liberator) during WWII but, I only knew him as a cabinet maker. The way the bits come out of mine is very different from the way it works on the one shown here. My heart skipped a beat watching this restoration. On mine, the pin you drove out of the top of the handle, that pin, on mine, is a spring loaded detent. You push it in and the top twists off after a short turn so you can pull the bit drum up to get at the bits inside. When I saw you hammering on that pin, I thought, "Wow, this guy is an idiot and is gonna eff-it up". But, thankfully, I was wrong. Anyway, nicely done.
I've seen the Craftsman style push drills, but never had one completely apart. I think Goddell Pratt made the push drills for Craftsman. The bits are different and not interchangeable with the Stanley Yankee.
Fantastic rescue. I like the way you are forging your way through that toolbox and bringing these old neglected tools back to life. This tool is very useful now. It's amazing that it had its various drill bits. Nine times out of ten they would probably be missing. Judging by the appearance of the bits, this tool looks like it was intended for delicate or light duty work. I'm really glad your stash saved the day. I wondered what you would do with those frozen threads. This video is a great lesson in being patient with your restorations. Thanks
Thanks Pat! I use my push drill all the time! It is my "cordless drill" I started collecting push drills because I needed replacement bits.
Looked like hard work and a pleasing result (lucky about the replacement part). I think when you repair something like a push drill it's about trying to restore the essence of the object rather than do a perfect restoration. I love the tool but truly relieved i don't have to rely on it and its bits to drill holes. 😢
Thanks for watching John! My North Brother No. 45 push drill is my go-to "cordless" drill!
Great job! Very impressed with your replacement pasts inventory
Thanks Daniel! I started collecting push drills many years ago just for the bits. I've got a couple broken ones that I rob parts off of.
Incredible restoration and tutorial. I'm glad that you had the spare parts handy. I tell my wife that I don't like throwing things out that might be useful. You have proven my point in spades. Perhaps you should call that push drill your Lazarus drill. I only recently came across your channel and found it truly interesting. Reminds me of my grandfather's tool chest. More, please.
Thanks Louis! I'm glad you are enjoying my channel!
This was not a restoration, it was a resurrection! Great job
I had fun bringing it back to life!
I really appreciate this video. Many would not show the struggle or failures. I also like that you kept going and got it working. A very realistic restoration of an abused tool. Keep up thw good work.
Thanks James! I'm glad I was able to get it working again!
What was surprising is that how much dried rust came out even after the soaking in evaporust.
I guess the insides were liquid tight!
Magdad you are the best that's a fantastic job and a great video thanks for sharing your time and skill 🥃🥃👍👍🇬🇧
Thanks Brian!
Great job there Magdad, honestly thought you'd have to give up on that one! 👍👍🇺🇸🇬🇧
Thanks Phil! Once I recovered the bits, I felt like I was playing with house money!
Great effort MagDad. Your skill level and patience exceeds mine but your videos definitely inspiring me to at least try to breathe new life into old tools! Thanks for the gratifying content!!
Thanks Matt! Cleaning up old tools is fun!
Nicely done MagDad 🛠👍😊
Thanks Sparky!
Hi Magdad , Just like mine I got in the Old Craftsman Tool chest deal at the flea Market . Mine Is A Little different , not sure of the maker of mine. Mine Was Rough too. Nice job 👍
I think Millers Falls made a lot of the Craftsman push drills. The bits are a different design.
I think you can call it a win. Looks good and it works. 👍🏻
Thanks Cory! It was a win for me when I got those bits free!
I have had some pretty good success using vibration from a air chisel but not everything. I've got a couple snap-on tools made specially for that a socket wrench and a screwdriver set .. but even a good snap-on man won't know what your talking about when you ask..but they're great ..
Mustie1 uses the Shake N Brake.
Loved the video!
Thanks Tom!
You “handled” that tough restoration very well, looks and works great. I liked the funny “bit”.
Thanks Larry! I'm glad I had a spare handle!
I have 2 of the plastic handle push drills with no bits and a model 41 with 7 bits. I use it more than my power drill
I started buying the push drills at yard sales just to get extra bits!
nice job as always
Thanks Trevor!
Dang, you really worked some magic on that one! Came out great :)
I had to open the big can of elbow grease!
Very well done! Impressive! 👍👍🪛
Thanks Tom!
Well simply amazing…very interesting tool….I see it fought you , but isn’t that more satisfying in the end , I think so….very impressive resto…well done ….🇬🇧🇺🇸
Thanks! It was worth the effort!
Great job. Was wondering if you could get it working
Thanks! I'm glad I got it running again!
Agreed!
Unbelievable! You busted your ass on this one! Have you seen guys nickel plating stuff in other restoration videos? I’m curious about it and how durable it could be. The nickel on the brass seemed to not necessarily protect it, but it was probably deep in rusty water for a while to etch the shaft the way it did. I know some guys go insanely overboard with restorations, getting things to mirror polished madness. To me, I am more likely to use a tool if it’s already showing use and character and if it was a gleaming mirror, I probably wouldn’t use it for fear of messing things up. What do you feel about it?
Thanks Joe! I'm not a fan of nickel plate. It is a very fragile and thin coating. In my opinion it is good for jewelry or something ornamental, but not a hand tool.
@@357magdad you can take nickel plating off with hydrochloric acid, doesnt take a lot and can be sourced relatively easily. Can neutralise it after by dipping it in water mixed with baking soda :)
For me it's a case by case thing ... I do use some of the stuff I've cleaned up but most I don't..only because I have better lol .. but to me I also think the scars tell a story of service... and on some the patiena adds character...
Found I just like it started cleaning it up the small screw on the handle is tough to remove I'll keep trying but your video is helpful now I know what I'm getting in too thanks
glad my video was helpful! I have another video of one of these in better shape:
ua-cam.com/video/QzNjNc0fmBE/v-deo.html
@@357magdad very helpful but I can't unscrew the small one I seen that you drilled the screw out but I might not be necessary for me to do that. Anyway thanks for all the information bro appreciate it ht
I wondered how you were going to fix that handle, guess it pays to keep stuff …problem is, I got too much stuff! Great video!
Thanks John! Push drills were one of the first tools I started collecting and cleaning up, so I've got a box of spare parts.
I would have given up once the handle threads broke surprised you finished that you had a spare part
Push drills were one of the first items I started collecting and cleaning up, so I've got a box ox spares.
Wonderful restoration, good for another 50 to 70 years.
Thanks Larry!
Yup have the patience of a saint. 👍
Mrs Magdad says that I can be relentless.
That was fun to watch! Maybe not so fun to do, but it all worked out. Lucky you had a "spare" handle eh?
I'm glad you enjoyed the video! I've cleaned up a lot of push drills, so I have a box of spare parts and replacement springs.
Is there any way to sharpen these kinds of bits? Would you please make a video on how to do that on different drill bits?
I have had some success "sharpening" the bits, but I'm not very good at it.
I have one or two of those.hand drills,mine r a little differant.the cap on the Handel has a hole on one side of the cap,the bits slide out one by. One as you turn the cap.still use it ,
I have a couple like that too.
What an amazing restoration! I thought for sure that it was destined for the junk bin but you pulled it back from the edge. Congrats!
Thanks! I get a kick out of working on the basket cases!
Nice work! This one clearly didn’t go your way but glad you were able to make it work and look good, too. And of course save the bits. Those spoon bits alone are worth a mint! Good video!
Thanks! I buy push drills when I see then at the sales mainly for the bits!