Cross Drilled Christmas Ornaments, by Dan Douthart
Вставка
- Опубліковано 25 гру 2015
- Dan Douthard shows his method of creating a hollow Christmas ornament with a hanging decoration in the middle. Dan begins by drilling holes in each face of a 1 ¾” cube. After turning it spherical and setting a finial, he hangs a decorative element in the cross drilled cavity and mounts an icicle. The result is an heirloom Christmas tree decoration.
Recorded and presented in HD 12/19/2015
Follow Us:
Facebook - / gwinnettwoodworkers
Google+ - plus.google.com/u/0/108617881...
Twitter - / gwinnettwoodwkr
Website - www.gwinnettwoodworkers.com
Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 "Holiday Acoustic Guitar".
I’m relative new at wood turning. I tried this ornament and was very happy with the results. Easy to follow video. I plan to use this method to do more ornaments...thanks
Another fabulous teaching presentation...Thanks Dan , your friend from Maryland....Barry
Really looks nice Dan !!!
Excelente adorno.
Merecidícimo like maestro.
Saludos desde Reynosa México!!!
so many useful mini-Tips!
i particularly liked the method used to see if one had cross drilled 1/2 way through _ seeing the ghost of the reflection from the forstner bit through the 1/4 in hole.
I've tried the ornament and found that I need to wait to add the 45 deg countersink. If added through Dan's process, I've cracked the block and had to use ca glue to save it. Adding the countersink after shaping (rounding corners, etc), I've had better success.
Nice work and presentation Dan !! thank you very much for sharing this
Outstanding Dan. You are a great teacher!
Wonderful work. I tried the drilled ornament a few times, different method. I learned a lot looking at this video! Thanks!
sliding the tailstock up before locking it in to find center is a great suggestion!
Great video, sir! Lots of awesome tips. I have a bunch of maple just sitting around, I'll definitely be making a lot of these for Christmas presents out of it.
Our club is doing a Christmas ornament challenge. I plan to do mine like this. Thanks for the video.
It looks like you are having to bend over quite a bit, is that because the lathe where you are doing the demo is too low? Seems like that would be hard on the back, especially if you have knees like mine that don't bend like they used to.
great job! Your tools are amazing
I think the E-Mail for the Handout doesnt exist No more so ist there a way to get the Handout?
Send an email to gwa-turner@hotmail.com and request a specific paper.
@@dandouthart633 Thank you !
A nice demonstration, the only problem for me, as a French speaker is: Dan speaks really too fast for m, but I really enjoyed looking your video. Congratulations for your interesting video. 👍
What's a tubafore? ;)
David M u
It took me awhile to realize what you were asking. A 2 x 4 is a common piece of construction lumber that you have in the walls of your home. The name comes from the rough sawn size of 2" thick by 4" wide. After surfacing, the final dimensions are 1 1/2" thick by 3 1/2" wide.
David M w
it's used in a marching band and is a very large brass instrument.
Beautiful ornament, beautiful design too much explaining and not enough turning
Get to the point, all the waffle is irritating and makes me want to leave. I ran the video at 2x the speed and still you take too much time.