1:23 Bad, bad, bad! You do not drive a bearing into position by pounding on the inner race. You press fit it into position using the OUTER race. Beating it into position as shown here weakens the races and sets the bearing up for early failure and often at multiple points.
Anytime you put a torque wrench on the bolt and it clicks right away, that means you over tightened it with the impact gun.. also love the lack of eye protection on the factory floor or proper respirators in the paint booth..
@@anthonyray773no he’s right! If I tighten it to 100lbs then you come along afterwards and torque it to 90 and it clicks without the nut moving, it’s not 90lbs because I already overtightened it before you came along.
I really liked how this video gave me a behind the scenes look at the Massey tractor manufacturing process. Details from quick attach to quality control were all clearly visible, giving me a comprehensive look at the quality and technology of the brand.
I grew up in Serbia in the 1980s with a Serbian license of IMT from England Massive Ferguson tractors that are assembled in Serbia. Although I always said Germans and Mercedes Benz makes the best diesel so do the english. Those three and four cylinder Massey Ferguson designed diesel tractors ran for 30 or 40 years without rebuilds
When I was a kid in Detroit the MF final assembly plant was right across the Southfield Frwy from my school. Had big proving grounds and my brother would go at night and got inside the fence line snag shifter knobs from the tractors..one night he and his buddy got chased By security on tractors but didn't catch them. Employed a lot of guys back in the 60's.
I have owned three of them and still use my 175 with the 4 cylinder Perkins diesel and it still starts and run great. The 105 I had pulled the same equipment on 2 gallons per hour less than my former Allis 7000. Have had 2 Massey combines also and the 410 with a 16 foot header and the 4 cylinder Perkins along with the 510 with a 20 ft header were the most productive I ever owned, including JD and AC similar models. But the JD 95 was really good also.
These are domestic to Pakistan-I think. I noticed someone "set" a ball bearing driving it on the center race. Everything they "torque" uses a click torque wrench with the fastener not moving before it "clicks" with a couple instsnces where they moved it maybe 20 degrees after the click. Guess they figure "torque" is the minimum tightness.
I think they are made for local use no exporting Massi ferguson had convention with a lot of countries Pakistan,Iran Etc to make a certain model for local use some countries had changed the brand name to export them but they are the same.
Built by AGCO. Allis Gleaner Corporation. Yes, the old Allis Chalmers Allis. World wide , way bigger than John Deere. They make Massey Ferguson, Fendt, and Valtra tractors. And all kinds of crop machines. And you CAN repair them yourself.
These are Millat tractors of Pakistan. Built under licence to AGCO. I doubt there are many parts that are imported, Millat seemingly to have complete capability.
not bad but why is one that has a alternator cover on it and a different one didn't🤔they painted over the shifter gromets and then there black again 🤔and a gas nozzle to put coolant in classic Love how the office desk is on the factory floor guess that's one way to keep an eye on them LOL😎😎👍👍
Note the absense of AdBlue, ECU's, EGR valves and other BS. Proper tractors albeit assembled with some bad practices but nonetheless, I bet they will still be doing work in forty years time. And no doubt, they wouldn't be allowed into Europe or the UK.
Yes and tractor 1/3 the price. Many European workers at VW and others will be losing their jobs soon due to cheap chinese cars, maybe tractor industry will be next?
Those sure don't look like Englishmen quality workers to me. Ill stick to my Farmall MTA, 1086, and 826 great old AMERICAN MADE iron until I die. It's so sad, because I learned to farm with and old Massey-Harris.
In USA these workers would require safety glasses, breathing protection, footwear safety belts auto shutdown etc. Plus a better than minimum wage, a pension contribution, health plan coverage, paid vacation days off, national holidays off, some religious days off all paid. Of course, uniforms, paid time to change clothing, paid break time twice a shift but 1/2 hr or more unpaid lunch time. Then a psid cleanup time at the end of the shift. Turns out this tractor company-reportly as employee owned, is failing financially.
Honde fica essa fábrica, essa é de fundamento com o modelo antigo, o melhor de todos, aqui no Brasil os trator Massey ferguson não prestam mais, mudaram os modelos, não tem mais nem os redotores no diferencial, e é só plástico e eletrônica, tão perdendo mercado, mudam modelos d todos os anos?
Dejó de interesarme el video entre minuto 8 y 8:40! Condiciones pésimas, útiles de prevención casera de circo! Operarios con sombrero, pañuelo y toalla wc, para filtrar partículas al respirar! Muestra evidente de que son monigotes para la empresa! Seguro que el jefe no pintaba en esas condiciones, como poco, un traje de astronauta! Lo que hay que ver y pasa en el mundo. El Pleistoceno todavía existe!
1:23 Bad, bad, bad! You do not drive a bearing into position by pounding on the inner race. You press fit it into position using the OUTER race. Beating it into position as shown here weakens the races and sets the bearing up for early failure and often at multiple points.
e coty tu godos !znos sie na kózych cyckach !
I do it their way, no pressure on the balls.
Love the respirators in the paint room. And they paint everything! You’re kidding…. Holy moly Batman.
Anytime you put a torque wrench on the bolt and it clicks right away, that means you over tightened it with the impact gun.. also love the lack of eye protection on the factory floor or proper respirators in the paint booth..
That’s the great thing about building your product in Mexico…no unions, no safety, just sheer profits!
Wrong. When a torque wrench clicks, it is tightened to the correct torque specs.
@@anthonyray773 hey dummy.. just because a torque wrench clicks doesn't mean it's not over-tightened..
@@anthonyray773no he’s right! If I tighten it to 100lbs then you come along afterwards and torque it to 90 and it clicks without the nut moving, it’s not 90lbs because I already overtightened it before you came along.
@@Broncort1But it
I really liked how this video gave me a behind the scenes look at the Massey tractor manufacturing process. Details from quick attach to quality control were all clearly visible, giving me a comprehensive look at the quality and technology of the brand.
Quality control? Luckily this is a clone or licensed tractor sold in pakistan.
I grew up in Serbia in the 1980s with a Serbian license of IMT from England Massive Ferguson tractors that are assembled in Serbia. Although I always said Germans and Mercedes Benz makes the best diesel so do the english. Those three and four cylinder Massey Ferguson designed diesel tractors ran for 30 or 40 years without rebuilds
Oh the days of building tractors in Southfield Michigan USA
Cool! I liked the factory and the tractors. 🙂
Excellent video ! 👍
Thank you ☺️ I’m
Where is the manufacturing plant?
Don't judge massey by this video, these are off-brand tractors
Massey Ferguson fro the U.K is extremely good.I guess these are built to soothe India standard.
very good idea..hello everyone.i come from Vietnam❤❤❤❤
How can they sell so many trackers?
We have global markets
Where is "we?"
When I was a kid in Detroit the MF final assembly plant was right across the Southfield Frwy from my school. Had big proving grounds and my brother would go at night
and got inside the fence line snag shifter knobs from the tractors..one night he and his buddy got chased
By security on tractors but didn't catch them. Employed a lot of guys back in the 60's.
Cade os EPI pra fazer a pintura
Excellent video, and thank you for the insight. Now I know, never to buy a Massey Ferguson.
😅😅😅
Why not
I have owned three of them and still use my 175 with the 4 cylinder Perkins diesel and it still starts and run great. The 105 I had pulled the same equipment on 2 gallons per hour less than my former Allis 7000. Have had 2 Massey combines also and the 410 with a 16 foot header and the 4 cylinder Perkins along with the 510 with a 20 ft header were the most productive I ever owned, including JD and AC similar models. But the JD 95 was really good also.
From the looks of the parking yard they obviously aren’t selling too many of them😂
These are domestic to Pakistan-I think. I noticed someone "set" a ball bearing driving it on the center race. Everything they "torque" uses a click torque wrench with the fastener not moving before it "clicks" with a couple instsnces where they moved it maybe 20 degrees after the click. Guess they figure "torque" is the minimum tightness.
Some countries build what the customs wants, not the country wants 😊😊😊😊
It’s called Real Freedom
Ai sim querreios trabalho top de linha
I see they don't allow dresses and flipflops on the assembly floor. I wonder if the parts are foreign made too?
I wish we could buy those in the USA. Looks like the MF 265 I had that was an excellent tractor.
I think they are made for local use no exporting Massi ferguson had convention with a lot of countries Pakistan,Iran Etc to make a certain model for local use some countries had changed the brand name to export them but they are the same.
Tive quatro tratores massey ferguson, até com 90 cv, porém o melhor era o 265, pensa num trator bom, todos massey ferguson antigos são ótimos.
no emission laws there in india or pakastin is why such bullshit
Buen trabajo parecen muy buenos
Where is this factory,India or South Korea or where.?
seemed like china but near indian border
They didnt resemble south koreans or china men
John Deere tractors Now Massey Ferguson is replacing them
Remember when Ferguson's were made in the UK ? Pepperridge Farm remembers
Excellent. How much price..
very interesting seeing serbs working with something on their feet other then flip flops.
یہ کہاں پر واقع ہے❤
Whoops this is something else then the modern car factories……
Built by AGCO. Allis Gleaner Corporation. Yes, the old Allis Chalmers Allis. World wide , way bigger than John Deere. They make Massey Ferguson, Fendt, and Valtra tractors. And all kinds of crop machines. And you CAN repair them yourself.
These are Millat tractors of Pakistan. Built under licence to AGCO. I doubt there are many parts that are imported, Millat seemingly to have complete capability.
That’s a tractor u can work on wish we could buy them like that in usa
Me too 😊
In What country is this
Pakistan
Where do all the parts come from I bet the Canadian workers could do the assembly better and more efficient tly
Who can afford American tractors?
lol those are not Massey Ferguson tractor . Those are out of date TAFE tractors.
I wonder how much they are
Glad to see where Massey Ferguson is really build I'll not buy another one
انشاءاللہ اب لینے والا کوئی نہیں ھوگا انکو
not bad but why is one that has a alternator cover on it and a different one didn't🤔they painted over the shifter gromets and then there black again 🤔and a gas nozzle to put coolant in classic Love how the office desk is on the factory floor guess that's one way to keep an eye on them LOL😎😎👍👍
❤❤❤
arbejdstøj mm er i orden. men de kunne godt bruge sikkerhedssko med snude kappe i mm, mod tunge fald på fødderne mm.
Note the absense of AdBlue, ECU's, EGR valves and other BS. Proper tractors albeit assembled with some bad practices but nonetheless, I bet they will still be doing work in forty years time. And no doubt, they wouldn't be allowed into Europe or the UK.
👍👍👍
workers less skilled than in Europe
Yes and tractor 1/3 the price. Many European workers at VW and others will be losing their jobs soon due to cheap chinese cars, maybe tractor industry will be next?
For all the 118 comments. At one time, they where made at Southfield and 96. In detoit michigan.
India is leading in tractor sales and South Korea is right behind them
Very good equipment also 😊
❤😊
in india tractor,car, motorcycle, assembly run on conveyor belts system.
No OSHA requirements here! No wonder we can't compete............
Very rudimentary construction. I feel like I am watching a model T being built.
Con motores PERKIPS... ingleses
My frome india
Xe ngon rượu ngon Việt Nam đây mấy ông già 🇻🇳🚜😂❤
Where is this? India? End of Life Land?
αξιοπιστα μηχανηματα και δεν χανουν της αξια τους διαχρονικα/και μετα 40χρονια να το πουλησης θα παρεις τα λεφτα σου πισω
Massey Traktorson Massey Tson.
samt ilt maske og åndedrætsværn, i paint shop mm. mod malerstøv og kemi mm. der. og en maler dragte. engangs dragte etc. på og hansker mm.
Gibt es einen solchen Traktor in Deutschland zu kaufen, und ist er dann auch Zulassungsfähig-dann bitte melden
Alibaba tractor?
دو نمبر سب
پہلے جاپان کے مظبوط مشینری کو خراب کیا پاکستانی لوگ نے
Where in the 3rd World is this plant?
Całe szczęście że daliście se spokój z wstąpieniem do UNII EUROPEJSKIEJ, większość zakładów była by zniszczona lub doprowadzona do bankructwa.
To wygląda na Indie a nie Turcję.
Those sure don't look like Englishmen quality workers to me. Ill stick to my Farmall MTA, 1086, and 826 great old AMERICAN MADE iron until I die. It's so sad, because I learned to farm with and old Massey-Harris.
In USA these workers would require safety glasses, breathing protection, footwear safety belts auto shutdown etc. Plus a better than minimum wage, a pension contribution, health plan coverage, paid vacation days off, national holidays off, some religious days off all paid. Of course, uniforms, paid time to change clothing, paid break time twice a shift but 1/2 hr or more unpaid lunch time. Then a psid cleanup time at the end of the shift. Turns out this tractor company-reportly as employee owned, is failing financially.
I'd be ashamed to show this video. Super poor safety methods and roughshod handling of components. Tells me one thing, never buy a Massey product!
At least they are working !!!
Hii
No osha there that's for sure
Honde fica essa fábrica, essa é de fundamento com o modelo antigo, o melhor de todos, aqui no Brasil os trator Massey ferguson não prestam mais, mudaram os modelos, não tem mais nem os redotores no diferencial, e é só plástico e eletrônica, tão perdendo mercado, mudam modelos d todos os anos?
لوکل کلر ھوراھاھے
Now I see why are MF so quality tractors 🤣
What language are they speaking
Tractor plant in pakistan u can see written Urdu in video.
If Massey doesn't become as greedy and stupid as John Deere, it could have a great career.
Jesi bourkinabe je ve un
IMT
Talk about hand made😂
🤒🧐😇👌✌✌
Simpson engine
Stop picking on them ...jeeeez
Any whites or brothers working
NOT MADE IN U.S.A. - DON,T WANT IT .
👍
Unhappy, rough around the edges workers…..
ชั้นตอนทำใด้ดีมากน่าเอามาขายในเมืองไทยบ้าง
Primer requisito para postular a trabajar ahí: Dejarse crecer el bigote...
Dejó de interesarme el video entre minuto 8 y 8:40! Condiciones pésimas, útiles de prevención casera de circo! Operarios con sombrero, pañuelo y toalla wc, para filtrar partículas al respirar! Muestra evidente de que son monigotes para la empresa! Seguro que el jefe no pintaba en esas condiciones, como poco, un traje de astronauta! Lo que hay que ver y pasa en el mundo. El Pleistoceno todavía existe!
India wale banane nahi dete assembly ki video