You should sand on the left side of the disk where the work is held in place on the table.. If you sand on the right side the work is lifted off the table and sanding metal you will get sparks in your face and eyes. Lovely sturdy construction and project. Well done.
José Ariel Romero de san Miguel de Tucumán Argentina amigo lo felicito por compartir sus trabajos. Muy bueno sus videos sus ideas voi a copiar sus obras gracias me despido con un fuerte abrazo suerte
This is actually a really nice build. The only thing i would have included would be a miter slot on the table so you can set the angle to the sanding plate. Other than that, I don't think you could ask for too much more.
Nice. Looks great. Looks like a pretty in-depth build. I'd love a quick and dirty version. I've been saving a 2.5HP treadmill motor for a purpose like this.
Хорошо сделал, надежно. А моторчик вообще красавец! Только металлические детали надо шлифануть и полакировать прозрачным лаком - отлично смотреться будут, или покрасить в свой "фирменный" цвет ( я так думаю, что это не один самодельный инструмент у мастера).
1. Where can I get 3" V belt pulley? I need 9/16" or at least 5/8" belt pulley to fit to my motor. 2. Is a 0.25 hp induction motor adequate to drive 9" sander?
Very cool video and build. I like the great instructions on your website to build this. I’m going to try to make one myself as soon as I can. Thank you for sharing
your videos always very interesting but not an easy to make it.... भैया जी, कभी तो अपना मुखड़ा दिखा दिया करें ताकि हम भी तो जानें आखिर वो बंदा कौन है जो इतना हुनरमंद है. 🙂
Beautiful! I found a motor on a shelf while cleaning my dad's shop after he passed. He was a machinist. I was law enforcement. I didn't know what to do with it. Now, I do since wood is my passion. Thank you. One thought; velcro loses its grip characteristic in short order and must be replaced on that wood disk. Sticky back sandpaper easier to replace then velcro hook after super gluing it on. Just a thot.
Happy New Year to you and all your followers!! A superior and unconventional realization that I particularly appreciated!! The self-built knobs are the "added value".... ;-) If you find abrasive discs without holes and of different grain, you could cut them and use at least two different finishes on the same level. Thanks for sharing!!! Antonello - Varese - Italy
For Dimensions And More Information :-
www.mistrymaketool.com/how-to-make-9-inch-disc-sander-machine/
U
Info on motor?
Un bun
Motor info...
0.5 hp Motor single phase
650 watts / 1440 rpm
¹wa1
Falling in love with carpentry while watching your video.. this is a great video to watch..
Mind blowing ideas...you meam?
سلمت أياديكم يا من تعلمون الفنيون الابداع والمهاره
One of the most beautiful songs ever. Thanks so much!
That v belt pulley was good Info . Thats what I need to complete this Project !
Hágalo usted mismo en casa y deje la envidia.
Buen trabajo, Felicitaciones.
Καλημέρα χρόνια πολλά και καλό Σαββατοκύριακο!
Not going to lie, this is bloody clever!
You should sand on the left side of the disk where the work is held in place on the table.. If you sand on the right side the work is lifted off the table and sanding metal you will get sparks in your face and eyes. Lovely sturdy construction and project. Well done.
I found the size of the motor on your site and great instructions and easy to follow, thank You 🙏 for sharing, GOD BLESS YOU
love the reuse of the old hole saw scrap cut off for knobs , brilliant
Excellent project
Thank you....
Dat is een tof machientje en niet te duur om te maken 👏👏🇧🇪
José Ariel Romero de san Miguel de Tucumán Argentina amigo lo felicito por compartir sus trabajos. Muy bueno sus videos sus ideas voi a copiar sus obras gracias me despido con un fuerte abrazo suerte
This is actually a really nice build. The only thing i would have included would be a miter slot on the table so you can set the angle to the sanding plate. Other than that, I don't think you could ask for too much more.
É show de bola é só sucesso parabéns pelo seu trabalho que Deus abençoe sempre você e toda sua família 👪 👪 👪
With the speeded up video it sounds like you are on a racetrack. Not complaining. Kinda cool.
Hi 👋
😁😁😁🔨🔨
Excellent video, you are a very skilled professional. Thank you for sharing.
Lots of knowledge and experience gained
Great job with all the best information and knowledge
Excellent video and process. It looks solid. Thank you for sharing. You are an inspiration for Homemade Sanders...Thank you.
Excelente trabajo, de maestro. Un saludo desde Málaga
II've seen a lot of ideas This is really a very excellent idea I will do it Thanks for the wonderful video
Nice. Looks great. Looks like a pretty in-depth build. I'd love a quick and dirty version. I've been saving a 2.5HP treadmill motor for a purpose like this.
So. Very. Cool 😎. I. Need. One. Now. I. Have. It. Thanks 👍. Lee
👍👍👍👍👍👍👍👍👍👍👍Good.. this video is useful.. thank you very much..
Muy bueno el video y el trabajo realizado.
Gracias desde Cádiz España
Хорошо сделал, надежно. А моторчик вообще красавец! Только металлические детали надо шлифануть и полакировать прозрачным лаком - отлично смотреться будут, или покрасить в свой "фирменный" цвет ( я так думаю, что это не один самодельный инструмент у мастера).
1. Where can I get 3" V belt pulley? I need 9/16" or at least 5/8" belt pulley to fit to my motor. 2. Is a 0.25 hp induction motor adequate to drive 9" sander?
VERY IMPRESSIVE WORK ! THNKS.
Very beautiful and good quality project my friend
Very cool video and build. I like the great instructions on your website to build this. I’m going to try to make one myself as soon as I can.
Thank you for sharing
This lovly You did nice job.👍👍👍👍👍
I am asking for more metal DIY👍
Hello 👋
Show, continue nos presenteando com esses projetos maravilhosos.
🙏ikut nyimak hasil karya luarbiasa,,,👍❤️
Excellent, very good, thank you. I will follow
Esse projeto é simplesmente incrível! Nota 10.
Very good. Amazing ans good explications . Thanks so much 👍
That’s really good. Loved the metal knobs. Excellent tool to have.
Mistry Make Tool,Happy New Year!
Kool. You may choose to add a few seconds to demonstrate how to clean up the sandpaper with an eraser, also.
Отличная работа друг! Спасибо
У нас в кооперативе чуть по более кругом была в 90-ые. Очень удобная штука!
Отличный инструмент получился!
Thank you
For such work you must have a perfectly equipped workshop.
And for the effort that goes into here, you can also buy a sander. Still a nice device.
Beautiful Project kreatif idea,,thanks you for sharing
I agree with you. Great job. GREAT GREAT SONG!!
PARABÉNS, muito bem feito, Você não economizou nos detalhes…, um verdadeiro show 👍
Abraço aqui do Brasil 🇧🇷
Excellent build! I'm glad to see someone else still uses nails other than me, lol.
Bom dia obrigado obrigado
Gol cherli sierra
Excellent video, you are very skilled professional. Thank you for sharing.
Прекрасный агрегат получился, поздравляю. Ещё можно шкалу в градусах нанести, чтоб не наугад и без транспортира угол наклона стола ставить.
Congratulations!!!
Thank you very much!!!
Happy new year with health !!!
Excelente !! 👏👏saludos desde Argentina 🇦🇷👍
Mantap bos tutorial nya trimaaaaassssas kasih 👍👍👍👍👍👍👍👍
your videos always very interesting but not an easy to make it.... भैया जी, कभी तो अपना मुखड़ा दिखा दिया करें ताकि हम भी तो जानें आखिर वो बंदा कौन है जो इतना हुनरमंद है. 🙂
Top marks for this useful project
Very neat fully done the febrication.
Это мастер с большой буквы!!!
Beautiful! I found a motor on a shelf while cleaning my dad's shop after he passed. He was a machinist. I was law enforcement. I didn't know what to do with it. Now, I do since wood is my passion. Thank you. One thought; velcro loses its grip characteristic in short order and must be replaced on that wood disk. Sticky back sandpaper easier to replace then velcro hook after super gluing it on. Just a thot.
Fantastic work 👏🏽👏🏽👏🏽👏🏽👏🏽
A great master! Congrats!
I have two old pool motors I need to put to good use. This might be a good project.
Simply the best I've seen so far.
Grande maestro !! Complimenti per il bel lavoro
Don't stop drilling.... 👍👍
Okk..
Great tool... Nice Job...
Brilliant build
Melhor projeto que eu olhei no UA-cam parabéns ficou top
Good job my friend ❤️❤️❤️!! Very informative idea!!! Take care always!!
It turned out to be an excellent grinding machine! Good luck my friend!
Sanding machine actually
Отличная работа друг!👍👍👍
Great video and nice job 👍 Respect 👌
Hola Desde Sinaloa México. Muy buen proyecto, Gracias por el esfuerzo y por compartir.
Top luar biasa pemikiran si pembuatnya. Kalau dijual berapa harga siap pakai. Salam rahayu.
It is a very nice build.Where did you get 9 inch sanding sheets.I am not getting even 7 inch dia sheets .
purchase the big square ones, and cut out your size !!
Excellent video bravo
Bom dia felicidade paz obrigado obrigado.
It is good when the head is in place and the hands of a person grow from where it is necessary!
Happy New Year to you and all your followers!!
A superior and unconventional realization that I particularly appreciated!!
The self-built knobs are the "added value".... ;-)
If you find abrasive discs without holes and of different grain, you could cut them and use at least two different finishes on the same level.
Thanks for sharing!!!
Antonello - Varese - Italy
Great build, I can really visualize the use of this tool, and love the idea of building my own
Perfect wood working
Excellent, very good
Good job idea👏👏👏
The best I have seen thus far, great job
AMAZING JOB BEST I HAVE SAW
Excelente projeto! Obrigado por compartilhar. Parabéns.
Excelente info gracias saludos desde Argentina
Very good guy, it's a very versatile tool.
Супппер.Незнаю кому как но мне понравилось.может быть и себе сделаю подобие. Удачи frend.
Nice invention
Hi 👋
Awesome Job!!!! Very Cool!!! Thank You!!!! 👍😎
Very good job 👍🤝
Very good design.
Very well, work great.
Thank you for sharing your information and free, unlike some
Estupenda máquina, que material es ese que le puso al disco de madera para poder inmovilizar la lija?
Very good design. But you could add a T-nut track and a protractor support. T-nut track (extruded profile from aluminium) can be bought online.
Excellent Home Made Deep Clamps
Робота колосальна. Молодець.
gRACIAS, NOTABLE! eSPECIFICACIONES DEL MOTOR...?
Thank you for a great project. I got a motor from an old table saw and I'm making an exact one🙂
An exact one what?
Nice video 👊🙏
Super my friend... Super.