DO NOT THROW THE OLD WASHING MACHINE MOTOR IN THE TRASH / DIY Powered Disc Sander
Вставка
- Опубліковано 4 гру 2020
- 📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Hello friends, in today's video I will show you how to reuse a brushless electric motor from a washing machine. DO NOT THROW THE OLD WASHING MACHINE MOTOR IN THE TRASH / DIY Powered Disc Sander.I will show you an easy way to create a disc sander, I will use wood and two-component poxypol glue with which I will glue the sandpaper. I will show you how easy it is to remove the old sandpaper from the wooden disk. These are steps that I think will be useful to you in making a disk sander. Thank you for your attention. In the video you will see a box that is adapted for the electric motor.
📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Friends, my name is Jordan, am the author of the Handmade Creative channel.
On this channel I present everything that I have done with my own hands. I enjoy sharing Projects I make as a Hobbyist, and what i have learned through other content creators, I am NOT a Professional, not a Teacher, my hope is I simply Inspire you to go make something yourself. We turn simple things into unique ones! Subscribe, it will be interesting!
-Creative ideas
-useful tips
-homemade tools
- hacks
- review
-toys - Навчання та стиль
Very nice. I will go out and look for a washing machine motor and build one of those.
잘만들었습니다.
Que capo voy a realizar una con un motor viejo q tengo tirado en el galpon buen video .
Я такую же сделал на дрели . Вместо двух компонентного клея использовал двух сторонний скотч на бумажной основе. Наждачную бумагу двух сторонний скотч держит и менять ее проще.
На пиле, ставлиу диск и наждачку. Прикручиаваю и работаю. никакова клея. Изнасилса или парвалса ставлю другую наждачку и погнал.
I made angle grinder threads on shaft and using sending pads and buffing on it
Wow thanks for giving us an idea...❤❤
This is to me just awesome,how you can do this ,I also appreciate you taking your time and showing it in its intirity.at least we see what you are doing basically step by step nice job my friend.keep these things coming Billy from Scotland.
O bom seria colocar um mandril pra que se possa trocar vários disco de lixas, muito bom o trabalhos depois e só aperfeiçoados parabéns
Ótimo vídeo Parabéns 👍
A good idea. I think we can make use of the motor for more similar rotational jobs for various purposes 🙏
Me gusta
Muy buen trabajo, amigo. ¿Qué potencia tiene el motor? ¿Cuántas RPM? Muchas gracias.
My husband got it :) very usefull!
Exelente.mil.gracias.de.costa.rica
Nekem is ez van nagyon jó köszörűgép felém van gyártva a motor Imi művek 😂👍
Good idea, The problem when you replace the sand paper , it's very hard 👍👍👍
porque ofender a NUESTRO dios ,si se ofreció por nosotros Y era dios pero aún HASI lo crucificados sin PIEDAD y aún resucitó para redimirnos SIEMPRE AMEN. 🐿🙏⛪🕊🌺💐
@@eladiooliveras9799😮😮j
nice!
Very good my friend
Good
Outstanding!
If those scissors weren't scrap when you started, they were when you'd finished. Tip - Score the line you made on the backing with a craft knife (only the backing, not the grit ) and the waste snaps off clean and easy.
5 hours work for 5 - 10 minutes grinding fun - you should use at least "klett" (Velcro) connections to hold the sandpaper on the disk. If so, changing the paper takes some few minutes instead of starting the whole work again and again
Okey super
Cool !
Thanks my friend
Cc
отлично
Nice content. Great tutorial! Thanks for sharing. New subscriber here. God bless
Very great tutorial, I like it tnx sir
3M Feathering Adhesive is the solution to your sandpaper replacement problem. We knifemakers use disc grinders like this all the time. Changing paper is a breeze using the feathering compound.
Great idea SIR GEE
Use a Hook 'N Loop sanding disc mount for easy change from worn to new ?
تحياتي من مازال فارس
tres bonne idee
Very creative..i done subsc..
Very interesting and innovative
Good idea end good job.
bueno
Good idea
You can use double backed tape to attach your sand paper, thus you can replace it by pealing it off. repeat.
very noice
Nice work :)
si el SEÑOR me bendice,quien contra mi.🐿🙏⛪🕊🌺💐🥰
Great masterpiece... with the assumption the sand paper lasts 3 years on the disc, as durable as diamond
Just use a heat gun to melt the glue and pull off the sand paper and glue a new piece on. Use a thick nylon cutting board for the disc next time.
nice
ok merci
Sorry forgot to ask where you got the control box. ?
can you do this with a motor from a dryer?
ODLICNO
what a lash up
el SEÑOR es mi pastor,nada me faltará jamás. 🐿🙏⛪🕊🌺💐🥰
or glue a Velcro pad and use hook and loop sanding discs
lo felicito amigo ... pero en el minuto 16:25 NO SE DEBE HACER DANGER PELIGRO
Идея хорошая. Работа топорная... И результат такой же.
Да уж работа так тяп ляп и готово неприятно смотреть
The two speed switch is a very nice feature!
thank a lot
Ne o
Very nice reuse.
Thanks my fruend
@@HandmadeCreativeChannel you can make for adwance some round plates with glowed sandpaper and atthatched with 4 screws to the circle you made.
Замена абразивного диска - нетехнологично. Каждый раз клеить?
Good.😀😀😀😀😀😁😅😅😅
Una pregunta se puede crear energia infinita con un motor de esto y un alternador de coche un saludo.
El portabrocas lo tengo que es 1/2 20 pnf lo que me falta es el adaptador
Wonderful 👍
Is it something more in that switch box except switch? Fuses or sth?
Hello, I just have a question ...what is that "square" thing wired to the motor? and also do you have a schematic how to wire the motor? I have the same with a 5-pin plug but don't know how to wire it, the starter relay has two wires but there is only one pin in the plug...I'm lost, seems so easy, nobody bothers with explaining..
My friend, i have many videos whit wiring washing machine motor. Just chek my channel thanks for your comment l.
Sandpaper was cut with a disposable blade knife, back on the days.
devi mettere il feltro incollato alla base di legno, in modo che, quando devi sostituire l'abbrasivo non occorre scollare il vecchio.
OK
You did not worry to answer the most obvious question a friend already done: to replace the sand disc or simply change grain you must dismantle all, yes or not? Obviously yes!
Amigo cuantos caballos es el motor y es a 110 o 220 v
It's 220/230 volts and 110 watts can't say about the HP.
What voltage do you input?
Ну кто же клеит наждачку на холодную сварку. Надо было на ПВА!
muy largo el tutorial gracias igual
What is the box ON_OFF switch on called ?
A mesa devia ser móvel para poder afiar há vontade aquela lâmina a ideia é boa
אפשר לדעת מהם הנתונים של מהירות וכוח ?
can you tell me what is the speed and power and is it good for wooden lathe
@@daniinbar2871 amigo através de um eixo au dobradiças na mesa ficaria móvel não pondo em causa o desempenhou da sua e dei a que é muito boa um abraço
Vídeo com som alto não acho muito bom não. Mas é um belo serviço.
How can I use that motor and slow it down would a dimmer switch do it?
Is 2 speed motor, when you turn on a slow speed you will use a electromagnetic brake
Лутше от болгарки лепучку
yes the sandpaper replacement! @ ?
they make velcro pads
Fenomenale
👏👏👏👏👏👏👍👍🙏🍀🇧🇷
Still I wanna throw.... don't have this much of patience
velcro backed sand papers are available, why stick it on to the circular wood using epoxy.
U could get some velcro to hold the paper on
I made this video for people who don't have the ability to use Velcro.....
cut the noise,,,,,....as it is NOT REQUIRED.........make that wood disk, 2 inches thick. Then, rough the outside a little. Install another 2 inch, roller (from skateboard, ones with bearings; 4 for about 32 bucks on amazon), and add a push or pull spring to it. Install a 2 inch belt, maybe 24 inches or so.....NOW YOU have a 2 in one sander. making mine now.....only use a 9 inch steel plate, with hole in center for motor, it is 1/2 inch thick) sands REALLY GOOD,
И выточить флянец на 32 и 125 диск
It's dc motor or AC motor
The programmes are unedited. The point of the programme is lost in endless repetition.
David Lixenberg
Your idea is good but why not put a self-adhesive velcro disc
Because I want to show the cheapest and easiest way to replace sandpaper. My next project will be with Velcro discs. Thanks for your 👌
Consider hardwood
Hey ! Please tell me how to connect the motor?
in my channel you can find many wiring videos! Thanks for your Coment :)
Where we can get control box if I need?
I make it, you can chek my channel 🤟
Just ensure that the disc that you fit to the shaft is rated to a higher rotational speed than the motor’s maximum speed.
There is a real risk of the disc exploding due to centrifugal forces.
SAFETY FIRST !
все хорошо но эта музыка это слишком
traduction :
NE PAS JETER LE VIEUX MOTEUR DE LA MACHINE À LAVER DANS LA PONCEUSE À DISQUE ACTIONNÉE BRICOLAGE
Where the hell you got control box from gringo?
Unibomber maybe ?
Keep changing sand paper
Very interesting but very annoying background music 🥴
You can buy sticky back sanding disc pads.
Time vast
Sr Creativo me parese muy irrestonsable se su parte que publique este tipo de trabajos donde no practica el menor tipo de proteccion y seguridad para trabajar , las personas que practiquen su forma de trabajar corren el riesgo de perder un dedo,una mano o morir electrocutados .......tenga mas cuidado y a los que pretendan construir solo por diversion este sander no lo hagan de esa forma .......pueden encontrar algo mejor en el mercado local sin el riesgo de sufrir un accidente o morir
Good idea. Sloppy job to my standards. "Like" anyway.
GOOD JOB BUT HOW TEDIOUS REPLACING THAT SAND PAPER ONCE IT IS WORN OUT. aNOTHER METHOD OF STICKING SHOULD BE BETTER
Hello my friend. For me this way is the best, easy and cheap!
¼