Whats the diameter of these tyres? The KM comes with good tyres yeah? If i wanted to get two extra sets to go to ten wheels, what should i get tyre wise?
these tires are about 64mm tall. KM kits come with softer tires than rtr. I run stock tires and the v3 tires. you can use 1.3 wheels with adapters from 5mm to 7mm as well.
David could you find out if Banggood sells these DAKA tires without the wheels. I have had no luck finding them and I would like to buy about 20. I have narrowed dozens of the stock tires but I think these stiffer tires would be better for my M35A2 Wrecker
Hi there, have you got more details on the tyres…. Where you got them from and maybe the name. I need harder tyres as I’m towing a trailer with an excavator on it. Thanks in advance. Jeff.
@@RunThatRC Hey mate, back to this point. Are they thinner tyres though, since they're side-by-side? They do, as you said, look v firm on the hill climb vid so the stock kit tyres are my likely preference (B-16, not Ural, I'm talking about).
@@antrc they are about the same dimensions. They are made of decent rubber and grip well. But no flex on tire sidewall. Maybe a good setup for heavy rigs or for loading it up without it looking like your running 10psi tire pressure.
This wheel kit will officially turn the b36 into the destroyer of transmissions, I went through 2 with these as a light trail truck before a 370 motor conversion, which in and of itself turned into a lot of modification if you have the center axle upgrade
This is a B36KM edition that comes with the center axle upgrade and a 2 speed with 370 motor. It has been running great so far for me with no issues. The single speed original gearbox may have issues due to the unsprung weight added causing more load. I recommend this tire combo for modded rigs or KM versions.
I wish I could do that for ya brother. I just don't have the time for it and would not be able to provide you with a timeline for completion if I accepted the job. Check out Facebook for the WPL RC page you may be able to find someone that may be able to help out.
if you have a regular kit the center axle does have a tendency to bind. Two pinions on one ring gear adds a lot of stress. If you have a B36KM version kit it should be smoother due to a center axle bypass shaft to evenly distribute load evenly to all axles. If you have a KM or the upgraded center axle then something isn't assembled correctly. Check for binding in diffs and steering hubs.
@@RunThatRC i have the metal upgrade for the axels and stuff so i have the better center axel, but i bought my wheel kit off amazon and it came with different way wider tires, the ones on the b14 and b16, they hang out quite far, i think if i got the proper wheels that are slimmer and say daka maybe it would turn more smoothly, im not sure where i can even just find the wheels alone, i dont have much money for stuff either since this is my first build
No upgrade needed for the axles but if your using the new metal axles that look like the original plastic you can't use the fake drum brakes on the ends or they will bind.
Greetings. Awesome channel. Would those fit the WPL C24? I’m doin a metal upgrade to the C24. I thought about purchasing that truck and painting it black to have in my RC shop. #SUB
Would like to say thank you for ( all your help) and (assistance ) in helping me build my 6x6 b-16 w p l , really enjoyed your videos and support , please check out my build , it's the red 6x6 with HGR on the door , also the camper is so sweet I had to show you , , your admirer , 😄 Jay , thanks again for all your help , shout out to, RTR thanks David 👍😊
Bro we don’t mind the long videos. They are super entertaining and I don’t even own a WPL or MN 😂
Thanks brother! I appreciate it! I will have more come up soon.
Whats the diameter of these tyres? The KM comes with good tyres yeah? If i wanted to get two extra sets to go to ten wheels, what should i get tyre wise?
these tires are about 64mm tall. KM kits come with softer tires than rtr. I run stock tires and the v3 tires. you can use 1.3 wheels with adapters from 5mm to 7mm as well.
5:00 What are the size of the fine thread screws? The ones you used. Thanks.
Nice looking wheels! Beautifully explained!
Thanks brother!
Where did you get these
David could you find out if Banggood sells these DAKA tires without the wheels. I have had no luck finding them and I would like to buy about 20. I have narrowed dozens of the stock tires but I think these stiffer tires would be better for my M35A2 Wrecker
I can check. I think I've seen them on ebay a while back just for the tires.
Wow. Cool mod. Thanks.
Looking nice ✅
Thanks for the visit
Thanks for video Bro 👍
No problem 👍
How do u build the rear duels as I'm having trouble I have the metal axle piece that has the 6 holes threaded and bolts and nuts
the rims face each other then screw all three together with the hub. Not sure if that makes sense.
@@RunThatRC so the nuts are irrelevant really
Hi there, have you got more details on the tyres…. Where you got them from and maybe the name. I need harder tyres as I’m towing a trailer with an excavator on it. Thanks in advance. Jeff.
I have the link to the wheels and tires in my description box. They do have a stiffer sidewall so it can help handle some weight.
Where can you get these can you put the link in this comment tanks
Links in the description.
Cool looking upgrade👍👍 I put a set on my b24. Like it a lot
They are nice. And add weight down low.
R u goin to put those on ur wpl c44
I will try and see how that looks
The regular tyres fit in those wheels or just those tyres do?!
Make a video in sand and rock to see the performance?!
Thanks.
Running vid for sure. You can actually fit the stock tires on these wheels. They are the same diameter.
@@RunThatRC Hey mate, back to this point. Are they thinner tyres though, since they're side-by-side? They do, as you said, look v firm on the hill climb vid so the stock kit tyres are my likely preference (B-16, not Ural, I'm talking about).
@@antrc they are about the same dimensions. They are made of decent rubber and grip well. But no flex on tire sidewall. Maybe a good setup for heavy rigs or for loading it up without it looking like your running 10psi tire pressure.
@@RunThatRC Gotcha, I have the option of buying the double rims without tyres, that's all. So I may go that route and see. cheers bud!
Wow that good looking ture
Ah that looks so good!
This wheel kit will officially turn the b36 into the destroyer of transmissions, I went through 2 with these as a light trail truck before a 370 motor conversion, which in and of itself turned into a lot of modification if you have the center axle upgrade
This is a B36KM edition that comes with the center axle upgrade and a 2 speed with 370 motor. It has been running great so far for me with no issues. The single speed original gearbox may have issues due to the unsprung weight added causing more load. I recommend this tire combo for modded rigs or KM versions.
If I bought the truck and sent it to you would you upgrade it if I payed for the parts required and sent them to you
I wish I could do that for ya brother. I just don't have the time for it and would not be able to provide you with a timeline for completion if I accepted the job. Check out Facebook for the WPL RC page you may be able to find someone that may be able to help out.
Yes, B36 URAL is the best of WPL's products. I have got too.
very good looking truck for sure.
would these tires fit on a b16 and would they look scale
they do fit the b16.
What is it price?
I've priced them up and in the UK they'll cost me £47 which will be around $63
Would these fit the eachine EAT01
I am assuming the EAT01 has the same drivetrain as WPLs. So if it does have 5mm wheel hexes these wheels can fit.
Could you show us how the B16 looks with these wheels? I'm thinking about building a model of M35A2, but it depends if the wheels look well :D
I haven't installed on my b16 but did on b1 before and it looks good with it. I think it will make the b16 look beast!
I got a kit like this from amazon and it struggles to turn the center axels bounces all over the place and is very unstable , i have the metal upgrade
if you have a regular kit the center axle does have a tendency to bind. Two pinions on one ring gear adds a lot of stress. If you have a B36KM version kit it should be smoother due to a center axle bypass shaft to evenly distribute load evenly to all axles. If you have a KM or the upgraded center axle then something isn't assembled correctly. Check for binding in diffs and steering hubs.
@@RunThatRC i have the metal upgrade for the axels and stuff so i have the better center axel, but i bought my wheel kit off amazon and it came with different way wider tires, the ones on the b14 and b16, they hang out quite far, i think if i got the proper wheels that are slimmer and say daka maybe it would turn more smoothly, im not sure where i can even just find the wheels alone, i dont have much money for stuff either since this is my first build
can we add weights on this wheel?
Yes you can. The wpl weights may fit but I haven't tried it because they are good enough with the metal axles without adding weights.
Do those fit the American 6x6?
If your referring to the WPL B16 then yes it does fit that truck as well.
@@RunThatRC ok thanks!
Do you have to up grade the axels
No upgrade needed for the axles but if your using the new metal axles that look like the original plastic you can't use the fake drum brakes on the ends or they will bind.
Cool video
What is the total width of the wpl b36?
About 425mm long bumper to spare tire holder. About 195mm tall and about 140mm wide.
Cool and when will you go out whith them in mud?)
Soon hopefully!
would these work on a JJRC Q60 ?
I don't own one but I assume it would. I think they use the same axles as the wpl and mn model stuff.
@@RunThatRC good to know thankz
Ooooooo nice send me a pair of those
Awesome brother
Woww! !!...così è più bello e realistico !!!
yup those are pricey, but they look really nice too.
They really do. I'm not sure why the rubber is so thick under the threads. No give at all. But they seem grippy at least.
Greetings. Awesome channel. Would those fit the WPL C24? I’m doin a metal upgrade to the C24. I thought about purchasing that truck and painting it black to have in my RC shop. #SUB
They have a 4x4 set made for those and you get 4 wheels that look like the front wheels of this 6x6 wheels.
Nice 🤍🤙🏼
Need mud tutorrial))
Lindo,,,,,,
Would like to say thank you for ( all your help) and (assistance ) in helping me build my 6x6 b-16 w p l , really enjoyed your videos and support , please check out my build , it's the red 6x6 with HGR on the door , also the camper is so sweet I had to show you , , your admirer , 😄 Jay , thanks again for all your help , shout out to, RTR thanks David 👍😊