WOW! Now that’s a nice trick! Long time listener; first time caller. I just wanted to take a moment to thank you for your expertise and the subsequent knowledge that you, and few other programmers, have shared on UA-cam over the years. Getting into this niche community is tough enough but showing up armed with the fundamental knowledge to succeed is what turns dreams to reality. Just thankful this part of the internet exists, and wanted you know how much your work is, and has been, deeply appreciated.
Depends on what type of file you have. If your new model is part of a fixture profile, use import in the console's patch... See this video: ua-cam.com/video/7wnCO9N5OUY/v-deo.html If you want to put in 3Ds file, then you need to put that in via the MA3D program. Follow the instructions here: help2.malighting.com/Page/grandMA2/3d_import-3d-model-to-ma3d/en/3.3 They also have instructions you want to create the 3Ds file yourself at help2.malighting.com/Page/grandMA2/3d-modeling-and-import/en/3.3
Hi cat, i want ask you. What all of the JFC was patched before. How many jdc your patched. And your video i want see the step more clearly. Because the group has not in Lay out. And you can watch to us how many jdc your patched. And please your video start from set up to patch up the fixture. Thanks before.🙏🙏
Hi Brian! Everything on the X4 bars in this video was made with Effects. I've actually moved away from using Bitmaps for the most part, just because the effect engine is so much more malleable. I hope this helps. :)
Hi Lu! First select all the lights that you want to move to the center, then change the “Move X” and “Move Y” values to 0. That sets those lights to an X,Y value of 0,0- which is the center of the screen. 😀🍕
Hi Cat, always nice to learn tips from you! ;) Trying to set the right mAtricks to move the JDC1.. but didn't work.. i set the block to 24 and i use Align < ... any tips ?
Hi Vlad! Yes! It’s gonna sound unnecessary, but add an interleave to your blocks of 24: the interleave needs to be a multiple of 24 that’s at least as high as the total number of cells you’re aligning. For example, if you have 7 JDCs, you’d need an interleave of at least 168 (7 x 24). But the number can be a higher multiple of 24 and it will still work. I’d recommend going with higher multiple so it will work with more selections of JDCs. Thanks for the nice comment!
@@consoletrainerhey cat! Is there anyway you know of doing this in grand ma 3? There’s no interleave in MA and I tried using groups and width and still not getting the same result… any insight would be greatly appreciated!
Hi Cat, Do you know how i can change the pan/tilt speed of a fixture in order to be the same between the real speed and the ma3D speed? Is it something i have to change inside the XML fixture profile file? Thanks a lot
Is it possible to have multiple of the same cell in a layout view? For instance if you have a fixture that only allows you to control zones instead of pixels, but you still want an accurate representation of the fixture.
Can you tell me what the fixture is? The MA isn’t going to allow you to put any cell (because a cell is a fixture) in the layout more than once. You’ll get the pop-up that says it’s already in the layout.
If the zones work in similar fashion to beye “shapes”, then it’s probably not going to visualize. If it does visualize and you need to see both pixels and zones at the same time- you’ll need 2 layouts in your view. It’s all about how the DMX layout and fixture profile is set up. You can send the info to MA or your distributor’s tech support department to ask. I’ve never had a tour tell me it “no” when I ask to have one physical unit in previz when it has onboard options that don’t visualize. Sometimes that’s the only way to go.
Hi Cat, sorry for my english i might not use the right words but how do you move the b eye's cells that way ? You're talking about Matricks but i can't make my Matricks active in the setup of my layout to arrange my MagicBlade's cells the way i want. They all move together or 1 by 1, i can't move them 7 by 7 ! Hope you understand my question ahah, thank you for your very usefull video, bye !
Your English is great! Don't worry. :) I think you already have a block of 7 in your MAtricks? After that, are you using ALIGN? (I used the first mode of ALIGN in my video). Then, if it's still not working right- check out the suggestion I made to Vlad in his comment below. You might need to add an interleave (honestly, I've seen some versions of software where interleave is necessary and some where it is not). I hope this helps!
Hi ! Thx for your answer ! I though i was missing something but it was very simple ! I had a wrong selection and a wrong MAtricks !! So it definitly couldn’t work well ahah ^^
Hi!! The K20s are in the extended mode with both shapes and pixel mapping. In the video, the looks were built with FX and chasers on the individual cells of the units, not shapes. The built-in shapes unfortunately don’t visualize because they’re like on-board effects in the unit. I think it might be possible in the future to have stuff like shapes show up in visualizers and consoles (GDTF is supposed to support this type of thing), but it’s gonna be super time consuming for manufacturers to build all that stuff into their files, so it will be interesting to see who will do it. Whenever I’m doing pre-programming for a show and we’re gonna be using something like a K20, I always ask to have one of the physical units in pre-viz with me... it’s the best way to write the presets. I do love those shapes.
WOW!
Now that’s a nice trick!
Long time listener; first time caller.
I just wanted to take a moment to thank you for your expertise and the subsequent knowledge that you, and few other programmers, have shared on UA-cam over the years. Getting into this niche community is tough enough but showing up armed with the fundamental knowledge to succeed is what turns dreams to reality.
Just thankful this part of the internet exists, and wanted you know how much your work is, and has been, deeply appreciated.
Thank you so much. That was a really great thing to read.
Does anyone knows the set of keys/buttons she is pressing at 4:43 to move/arrange them ? i tried "Align" but not working.
its just move x and y, x its where it started, and y where it go, (sorry for inglesh, im brasilian)
How would you move all the JDC-1's so easily when I clone mine in the layout I had just shifts, and how do you spread them so evenly
Same here. And it doesn't clone with the proper layout. It's all over the place
I tried align but that didnt work.
Hi Cat , Thank you very much for your kindness
You are very welcome! Thank you for such a nice comment.
@@consoletrainer
I need assistance please
How do i get the show fille please
Hi my question is how is change model in 3d Chauvet 4x4 48 Chanel ?
Depends on what type of file you have. If your new model is part of a fixture profile, use import in the console's patch... See this video:
ua-cam.com/video/7wnCO9N5OUY/v-deo.html
If you want to put in 3Ds file, then you need to put that in via the MA3D program. Follow the instructions here: help2.malighting.com/Page/grandMA2/3d_import-3d-model-to-ma3d/en/3.3
They also have instructions you want to create the 3Ds file yourself at help2.malighting.com/Page/grandMA2/3d-modeling-and-import/en/3.3
How did you stretch the cells of the X4 bars in the first part of the video???
Hi cat, i want ask you. What all of the JFC was patched before. How many jdc your patched. And your video i want see the step more clearly. Because the group has not in Lay out. And you can watch to us how many jdc your patched. And please your video start from set up to patch up the fixture. Thanks before.🙏🙏
Is that an effect or bitmap on your x4 bars at around 5:35?
Hi Brian! Everything on the X4 bars in this video was made with Effects. I've actually moved away from using Bitmaps for the most part, just because the effect engine is so much more malleable. I hope this helps. :)
@@consoletrainer Hey thanks!
Hello, teacher! How to make all lamps and lanterns return to a midpoint in the layout? I see this operation in your video
Hi Lu!
First select all the lights that you want to move to the center, then change the “Move X” and “Move Y” values to 0. That sets those lights to an X,Y value of 0,0- which is the center of the screen. 😀🍕
Consoletrainer - Cat West Thank you, teacher
Hi Cat, always nice to learn tips from you! ;)
Trying to set the right mAtricks to move the JDC1.. but didn't work.. i set the block to 24 and i use Align < ... any tips ?
Hi Vlad!
Yes! It’s gonna sound unnecessary, but add an interleave to your blocks of 24: the interleave needs to be a multiple of 24 that’s at least as high as the total number of cells you’re aligning. For example, if you have 7 JDCs, you’d need an interleave of at least 168 (7 x 24). But the number can be a higher multiple of 24 and it will still work. I’d recommend going with higher multiple so it will work with more selections of JDCs.
Thanks for the nice comment!
@@consoletrainer Thanks a lot Cat! It works now! ;)
@@consoletrainerhey cat! Is there anyway you know of doing this in grand ma 3? There’s no interleave in MA and I tried using groups and width and still not getting the same result… any insight would be greatly appreciated!
Hi Cat, Do you know how i can change the pan/tilt speed of a fixture in order to be the same between the real speed and the ma3D speed? Is it something i have to change inside the XML fixture profile file? Thanks a lot
Found!!! I had to set the parameter phystime="25" inside the ChannelFunction nodes of pan/tilt. Thanks the same
Извините , но непонятно как вы выбирали и нарисовали layout , не видно то что вы печатаете и выбираете
Is it possible to have multiple of the same cell in a layout view? For instance if you have a fixture that only allows you to control zones instead of pixels, but you still want an accurate representation of the fixture.
Can you tell me what the fixture is?
The MA isn’t going to allow you to put any cell (because a cell is a fixture) in the layout more than once. You’ll get the pop-up that says it’s already in the layout.
Consoletrainer - Cat West Gotcha, the fixture is very similar to a Chauvet RX2 Wash. Basically they break up the zones into 3 independent rings
If the zones work in similar fashion to beye “shapes”, then it’s probably not going to visualize. If it does visualize and you need to see both pixels and zones at the same time- you’ll need 2 layouts in your view. It’s all about how the DMX layout and fixture profile is set up. You can send the info to MA or your distributor’s tech support department to ask.
I’ve never had a tour tell me it “no” when I ask to have one physical unit in previz when it has onboard options that don’t visualize. Sometimes that’s the only way to go.
Hi Cat, sorry for my english i might not use the right words but how do you move the b eye's cells that way ? You're talking about Matricks but i can't make my Matricks active in the setup of my layout to arrange my MagicBlade's cells the way i want. They all move together or 1 by 1, i can't move them 7 by 7 ! Hope you understand my question ahah, thank you for your very usefull video, bye !
Your English is great! Don't worry. :)
I think you already have a block of 7 in your MAtricks? After that, are you using ALIGN? (I used the first mode of ALIGN in my video).
Then, if it's still not working right- check out the suggestion I made to Vlad in his comment below. You might need to add an interleave (honestly, I've seen some versions of software where interleave is necessary and some where it is not).
I hope this helps!
Hi ! Thx for your answer ! I though i was missing something but it was very simple ! I had a wrong selection and a wrong MAtricks !! So it definitly couldn’t work well ahah ^^
@@allancotard1243 Haha- Been there myself!
MAKE THIS VIDEO BUT WITH THE GRID SELECTION MA3 PLEASE ILL DO ANYTHING
Hi Cat
Are you on shaper mode on thé K20???
Hi!! The K20s are in the extended mode with both shapes and pixel mapping. In the video, the looks were built with FX and chasers on the individual cells of the units, not shapes. The built-in shapes unfortunately don’t visualize because they’re like on-board effects in the unit.
I think it might be possible in the future to have stuff like shapes show up in visualizers and consoles (GDTF is supposed to support this type of thing), but it’s gonna be super time consuming for manufacturers to build all that stuff into their files, so it will be interesting to see who will do it.
Whenever I’m doing pre-programming for a show and we’re gonna be using something like a K20, I always ask to have one of the physical units in pre-viz with me... it’s the best way to write the presets. I do love those shapes.