Call me old fashioned, but this is the way I prefer to watch videos. 1. Where a jeep already has a problem already. 2. Fabrication to fix the problem. 3. Although not winning any filming contest, definitely good enough filming and edit to convey wtf is actually going on. 4. Not having the worst music or endless ranting about stuff that doesn't matter. Nice job man, much appreciated. I have a WK jeep, but I am using this video to help complete my project.
Nice work! I'm planning a similar repair on my 1994 ZJ and have a choice between 1/4" or 1/8" 2x6 from my local supplier (3/16 is not in stock, special order, with no commitments on when it will be available). Is 1/4" overkill for daily driver + occasionally trail blazing? Likewise, would 1/8" be sufficient for an upgrade that doesn't over-stress the rest of the Jeep? I plan on reinforcing a few jacking points, but other than that, don't expect it to take a beating. Your thoughts?
1/8 is alot stronger than most expect it to be for some basic trail riding it will be perfectly fine and its already much stronger than the factory sheet metal no need for 1/4 in your case
Sharing this video with anyone who asks about side steps or rockers for WK’s as well since the market is scarce and products are not pretty whatsoever. I recommend 2”x6” or 2”x 8” square tubing like this for WK’s. 2”x8” so that you can use Hi-Lift jacks for easier recovery with the body/doors contour and avoiding the Hi-Lift being at an angle.
I am preparing to do this on my ZJ. How did you attach the front fenders down at the rock sliders? I cut my rusty rocker panels off, but stopped at the front fenders. I haven't seen anyone cover that yet. If you cut them, there are no fasteners down there. Looks good! Thanks!
I’ve cut mine out but need to weld the material back in. I’m going with 2x6 though so it creates a bit of a rock slider too. The way I’m planning on doing it will be a bit of a twist so keep an eye on my channel for that coming up soon.
Pretty cool. I have been looking for options form the rockers and rear of the front fenders on my ZJ....this is the perfect option....and cheap to do.
Call me old fashioned, but this is the way I prefer to watch videos.
1. Where a jeep already has a problem already.
2. Fabrication to fix the problem.
3. Although not winning any filming contest, definitely good enough filming and edit to convey wtf is actually going on.
4. Not having the worst music or endless ranting about stuff that doesn't matter.
Nice job man, much appreciated. I have a WK jeep, but I am using this video to help complete my project.
Nice work! I'm planning a similar repair on my 1994 ZJ and have a choice between 1/4" or 1/8" 2x6 from my local supplier (3/16 is not in stock, special order, with no commitments on when it will be available). Is 1/4" overkill for daily driver + occasionally trail blazing? Likewise, would 1/8" be sufficient for an upgrade that doesn't over-stress the rest of the Jeep? I plan on reinforcing a few jacking points, but other than that, don't expect it to take a beating. Your thoughts?
1/8 is alot stronger than most expect it to be for some basic trail riding it will be perfectly fine and its already much stronger than the factory sheet metal no need for 1/4 in your case
Great work. I have the same Jeep. And my passenger rocker panel is rusted. This is a great idea.
Rusty rust holy shit I’m glad I live in a hot country good luck 👍
That adds some major side crash protection too....with the addition of the frame supports that is.
Looks great! Good job. Soon to do mine like this
Sharing this video with anyone who asks about side steps or rockers for WK’s as well since the market is scarce and products are not pretty whatsoever. I recommend 2”x6” or 2”x 8” square tubing like this for WK’s. 2”x8” so that you can use Hi-Lift jacks for easier recovery with the body/doors contour and avoiding the Hi-Lift being at an angle.
What's the wall thickness of the 2x5? And what did it cost you?
Looks like 3/16 to me
Is that 1/4" square tube? My sliders are rusted just as bad as yours was. I'm thinking I'll do exactly what you did in this video. Such a clever idea.
Good job !
how long are they?
I know its old but what length did you go with?
I am preparing to do this on my ZJ. How did you attach the front fenders down at the rock sliders? I cut my rusty rocker panels off, but stopped at the front fenders. I haven't seen anyone cover that yet. If you cut them, there are no fasteners down there. Looks good! Thanks!
I’ve cut mine out but need to weld the material back in. I’m going with 2x6 though so it creates a bit of a rock slider too. The way I’m planning on doing it will be a bit of a twist so keep an eye on my channel for that coming up soon.
That's a great idea. Just stumbled on this page but I have a zj too. Do you have a video of the braces added?
Do you happen to have the length of this piece? Also what angle did you cut the ends at?
Do u remember how long ur slider was buddy and I are going to store for metel for both the zjs right now
Do you weld the fender to it to?
Hi @n0osleep, do you have the steel thickness ?
Very nice job ;) and thank you !
Mopar Adventure hey! I’m pretty sure I used 3/16 thick.
How many inches long?
Did the same with 2x8 1/4 in thick.
Awesome great work :)
loved the video i think my 5.9 got that side beat my looks awful
What is the tire size
do you recommend putting on steel like that? or could you order in some OEM rockers and replace just the same way? cheers
Still working on the Jeep?
Orvis?
Lift and tire size
My rockers are completely gone tho
I need one of those tools
And more videos if the zj