One thing I LIKE about this heater is the dome gives a reflection, where many others don't. You need reflection in radiant heat!!! My members mark heater went together flawless and has true 304 stainless steel. I may order the fire sense dome!
A pair of plyers, really? Never put plyers on bolts and nuts. Maybe a crescent wrench in a pinch. Wrenches and sockets are really not that expensive. I put one together and have to say it was very easy and well thought out. All parts marked well and all holes aligned perfectly.
2 of the 3 holes were not made correctly for whatever reason and I tried everything for about an hour before I broke out the vice grips. My patio heater may have just had a defective part. But i would never use any tools unless it was necessary and believe me it was necessary or I would have had to take it back to Sam's Club. Thanks for watching!!
Put two of these together and neither is letting off any heat whatsoever. When I light the heater it works, but the flame is extremely small on both. The flame stays small and never gets big. I’ve changed the tank three times to insite it wasn’t the tank.
Does yours radiate enough heat to warm up the surrounding? I don’t feel a warm up when mine is on. Guess if that’s the heater’s design issue or something else. Thank you.
I just picked up the grey one from Costco for $129.99 in store. Little bit of a pain in the ass to put together solo. What cover do you recommend for storing outside in winter etc?
@@UltimateTechHub yeah same setup, I'm using a 30mbar butane Regulator and gas. Works great. Planning on sitting out there tonight with it on. Thanks Any chance you can subscribe to my channel and show me some support. Thanks. If not don't worry
@@magooblack629 they probably have the regulator in the back of Home Goods....lol. You may need to contact Fire Sense. They may send you one for free. Just explain what happened.
Sorry about that. You twist on the tank after you finish the assembly. It's pretty straight forward. Make sure to prime the ignition when lighting the heater. Push the knob in for 10 seconds before lighting the heater.
We hope this helps you with the installation of the Fire Sense Patio Heater. Thanks for watching!
Today I assembled 4 of those for a restaurant. super easy to follow the instructions in this video. Thanks a lot
Glad it helped!!! Thanks for watching!!
Excellent demonstration. Thanks for sharing.
Glad it was helpful!
Thank you SO MUCH for this video. It was exactly what I needed. Really appreciate it.
The feedback on the installation process is very helpful!
One thing I LIKE about this heater is the dome gives a reflection, where many others don't. You need reflection in radiant heat!!! My members mark heater went together flawless and has true 304 stainless steel.
I may order the fire sense dome!
I bought this heater weeks ago. Just getting around to assembling it. Watching is better than reading for me. Good video.
Thanks for watching!
Thank you for your easy guide
Looks pretty cool
Thank you. It keeps you warm on those cold nights on the patio.
Thank you 😊 by the way did yours have black smoke come when you first started it ?
Yes just the first time after that no smoke at all!!! Enjoy the heater and thank you for watching and if you subscribed thank you as well!
Thanks bro
Thanks for watching and for commenting!!
A pair of plyers, really? Never put plyers on bolts and nuts. Maybe a crescent wrench in a pinch. Wrenches and sockets are really not that expensive. I put one together and have to say it was very easy and well thought out. All parts marked well and all holes aligned perfectly.
2 of the 3 holes were not made correctly for whatever reason and I tried everything for about an hour before I broke out the vice grips. My patio heater may have just had a defective part. But i would never use any tools unless it was necessary and believe me it was necessary or I would have had to take it back to Sam's Club. Thanks for watching!!
Put two of these together and neither is letting off any heat whatsoever.
When I light the heater it works, but the flame is extremely small on both. The flame stays small and never gets big.
I’ve changed the tank three times to insite it wasn’t the tank.
I just assembled mine and it’s doing the exact same. Did u ever get it figured out?
Does yours radiate enough heat to warm up the surrounding? I don’t feel a warm up when mine is on. Guess if that’s the heater’s design issue or something else. Thank you.
It warms up about a 5 foot radius. Not a big area that's for sure. It's a good heater not a great heater.
@@UltimateTechHub Thank you so much. I think it could be my half full gas tank causing the issue. Almost return it for not warming up enough.
Costco has this for 99$ in warehouse
Fantastic Deal! Grab it!
I just picked up the grey one from Costco for $129.99 in store. Little bit of a pain in the ass to put together solo. What cover do you recommend for storing outside in winter etc?
I don't have a cover I store it under my patio.
@@UltimateTechHub Live in Michigan bad weather here so need a cover lol! Thanks for the video.
How will these do in heating an outdoor patio that has canvas walls?
Should work well. Its a fantastic outdoor heater. We use it all the time
@@UltimateTechHub thanks!
Does it work with Butane Gas?
The instructions say propane only.
@@UltimateTechHub don't worry. I've got mine working. It does work with Butane. Thanks
@@BengiGaming hey that's great to know. I will pin a comment so everybody will know. Is it the same serup with hose regulator?
@@UltimateTechHub yeah same setup, I'm using a 30mbar butane Regulator and gas. Works great. Planning on sitting out there tonight with it on. Thanks
Any chance you can subscribe to my channel and show me some support. Thanks. If not don't worry
Where can you find a regulator that fits?
Your regulator doesn't fit? Home Depot should carry regulators.
@@UltimateTechHub I bought it from home goods already assembled and it didn't come with one home deposit were too big
@@magooblack629 they probably have the regulator in the back of Home Goods....lol. You may need to contact Fire Sense. They may send you one for free. Just explain what happened.
@@UltimateTechHub lol yes your probably right I will contact them thank you!
You never did say when to twist on the gas tank or you assume it in your video.
Sorry about that. You twist on the tank after you finish the assembly. It's pretty straight forward. Make sure to prime the ignition when lighting the heater. Push the knob in for 10 seconds before lighting the heater.
with the right tools, that would have taken only 15 min to assemble .
Don’t be a pansie. It’s fine and fun to put together
🤣 just put it together myself little bit of confusion but wasn't bad. Doing it solo took longer 🤪💥🔫
Does it come with a regulator?
Yes it does.