YOU are the PERCECT Instructor. No details left out - BUT more important - not jam-packed with oceans of words to dilute the clarity. This is a VERY high technological piece of machinery that you calmly and clearly pointed out what a user needed to know. I had commented when I first became a Patron that you INSPIRE..... Thank you again and I'm looking forward to learning even more from you about the "Big Picture" of running a successful venture like yours.
I cannot thank you enough for such a thoughtful and fantastic comment here - I love making videos and comments like this show me how much people like you appreciate them! I'll have lots more stuff throughout the winter, thank you very much for your support along the way!
You should see my outtakes lol - seriously though, I appreciate it! All this work is so worth the final result in these videos :) Can't wait to help you with some of your projects!!
I use to work at company that had 1 4-head brother embroidery machine and 2 6-head embroidery machines, that I would run all the same time, and I really miss it. Sadly, that business closed down a couple of years ago!... If I had the money I would for sure get one (or 2) of these machines!
Oh for sure, if you can stay disciplined, you can basically print money with machines like that. Plus, you can obviously make crazy stuff nobody else can do!
I just discovered you today and was so impressed I already made a donation. Trust me when I say for me to do that...you hit the nail on the head!!! You were clear and on point and you have the perfect tone in your voice!! Thanks so much. Looking forward to seeing more of your tutorials.
Oh my god, thank you SO MUCH for that donation! I truly appreciate it, seriously!! Very happy this was helpful and you enjoyed this video - I'll be sure today's lunch is in your honor
@@TockCustom just now seeing that you replied!!! Now bring on more videos with the 1055x I was still in dreaming of getting one of those machines when I messaged you but NOW! I have one!!! Thanks to my husband!!! I need to know how to use it more. How to put in the needed stops for appliqué, how to hoop hats and use the camera, how to use the scanner etc etc!!! When to change needles based on fabric choices, how to handle metallic thread....the list is endless!
Thank you for a great video. My machine was delivered yesterday, still haven’t turned it on but I’m anxious to give it a run after watching your startup video. Going to check out more of your videos on the PR1055, your instructions are so crisp and clear, you’re a thorough teacher.
Thank you so much for your clear instruction, with your you tube channel I have been able to understand how to use my PR1050x. I bought machine in 2019 and because of your channel I really got to embroidery . Many thanks
Embroidery does require plenty of work before any work is started and that machine is extra special and can make the task so much easier by doing everything electronicly. I have a very large patch which I purchased from the area air force base to put on a jacket I have, but have not put it on yet. I wondered how much work went into making this patch and now I know after viewing your video and love how that machine works.
Yep, just like sewing is 5% sewing, and 95% cutting, measuring, pinning, and planning - same goes for embroidery. I guess that goes for any craft - and the results are always worth it :)
@@TockCustom Fully agree the percentages of actual sewing vs all the other parts. Especially when you are designing your own items as I have been designing and making bags and the sewing is by far the quickest part of the whole operation.
WOW! I just retired and this is sure a top contender to augment my income. The unboxing went smoothly, setup seemed uncomplicated and the threading looked ez-pz! Looking forward to your tutorials on this magnificent machine Tock, great job, and those patches are flawless! 👏👍
I've had this setup for 3 days, and already got a $600 commission for one day of work - you can certainly make some decent income with a machine like this :) Thanks for watching!!
So happy I found your channel. I just got this machine 3 days ago and haven't had my intro class. You explained everything so clearly. Can't wait to see more from you and get stitching. Thanks
You are amazing ive seen so many reviews with embroidery and they always lack a certain element but your reviews are perfect infact your the one that actually got me into embroidery and I love the brother pr1055x its awesome its serious money but worth it even the pe design 11 is expensive but worth every single penny like your worth your weight in gold carry on with the good work and ill look forward to many many more reviews about the pr1055x take care buddy
Wow! I purchased a Brother Entrepreneur 6- Plus Saturday and even though the threading was a little different, all the rest of the tutorial was spot on to what I needed! I struggled all weekend trying to figure it out reading the manual to no avail, and then I found you. I think I’m in love! Thanks for showing these instructions so even a child could learn!
Just came across your videos and thoroughly enjoy how well you explain everything. Was wondering if you have tutorials on how you made the designs before stitching them.
Thank you Tock very much for this demonstration. I am French and do not speak English so I watched without sound but I understood your demo correctly. I already have a Stellar and I really want to switch to this machine but I wanted to observe how it worked. You are very calm and I really liked your video. Maybe I'll make up my mind but the coil system seems to me to take a long time to install. I also hope that we can put magnetic frames.
I must say, that I owe you my first embroydery Marsu from the FrenchWestIndies It is nice to hear your over grave voice on this subject... Thumb UP ! And I suscribed...
Another awesome video my friend. This machine is amazing. The fact that everything came out so crisp is a huge time saver. Just think of the things you can make on this thing!
Thank you for this video!! I just purchased my PR1055X and I was getting so frustrated with my thread breaking every time I tried to stitch my first pattern. I definitely missed the last hole before threading the needle. You are a life saver and a great resource!
You are welcome! Oh also make sure you close the metal thread guide on the top rack before you start your embroidery as well, that makes a HUGE difference 😊
I purchased the entrepreneur 6 plus pr670e recently, with the hat hoop and the durkee hoops deal and the mighty hoops shirt station with extra magnetic hoops , ill be doing polos and hats, got the pe design 10 at a great deal on eBay and have been learning the software , I’ve already sold many shirts embroidering with the se600 and look forward to building a home business to supplement income that is both fun and enjoyable, i hope to see more instructional videos from you, thank you
I too enjoy watching your videos. I would like to request: Can you please do a video on how to do stippling only on the PR 1055 X machine This would be most helpful to me to use this on our largest hoop ( the 360 x 200) also I have the jumbo hoop where you turn the hoop and scan the snowman for the 2nd half of the design.
I totally understand, I was given this machine to help Brother with a bunch of really exciting projects. If you're interested in getting into some embroidery projects the SE-600 and PE-800 are great starter machines for between $350 and $700 which is great value. Thanks for watching! Hope you have a great week :)
Awesome video. I just bought the Brother PR670e 6 multi needle and need some direction. Once I get my 6 threads loaded and load my design how do i assign those 6 threads in my design that has 20 steps. I can’t find it anywhere in the manual where is shows you how to assign the threads to your design. Can you do a video on that. I know you used only 3 threads but didn’t show how you assigned what color to what step. I hope i’m explaining it clearly so you know what I need to know. Thank you for any help with this.....😃
Oh for sure, I understand, and yes... I didn't really cover that in this video. I've been working on some other projects, but I'll try to do a more robust 'threading and colors' tutorial for this machine soon! Thanks for the suggestion! Hope you have a terrific week Mary!
I would also like this...but also would like to know how you can keep the thread assignments between hoopings of the same design. It seems my designs, which I assign thread colors to (ie, in the design, I’ll say Madeira 1800) but that doesn’t seem to carry over to the machine when I load the design. I’m stuck using the dreaded magic wand each and every time...even though I’ve anchored Mediera 1800 on a certain spool. The manual is of no help.
I just got this machine and the one thing that has me bewildered is the threading selection. I managed to set the machine up and even the wifi and got it threaded. But my confusion comes when I go to the screen and all the numbers are in the needle positions. I can't seem to get them changed. I found a page that has a clear settings button. I presses that and it cleared on that page but not when I went to embroider. So, I'm going to look to see if you have any videos explaining more about the thread selections. The gal at the store said for me not to pay any attention to the left side of the screen when looking at the colors. Confusing. Thank you for your time. I just saw you on Sewing Machines Plus and think you are amazing!
I just got this machine. I'm gobsmacked. My eyesight is failing and I would like to know how I can switch spool colors and spool numbers so that if I have green on spool 3 but would like to switch green to spool 9, how would i do that??? This is the best tutorial I have found. You are a master instructor..
This is my 4th embroidery machine.... the results blow every other machine away! And these were just simple 3 color patches. Can't wait to see what else this can do :)
Great video ! I just bought this machine and I am completely new and naive with embroidery. I was wondering if you can do a video on how you placed these patches on the clothing afterwards as well as how to create or design .
Thanks! I did a different video using my PE-770 to make a bunch of patches, and how to add fusible webbing, that video might be helpful. Once that was done, I just cut them out, ironed them onto a bunch of jean jackets, and then stitched around the edges to secure it in place :) I also have a video on how to design custom graphics too which should be helpful
@@TockCustom I’ve left my machine a couple of months because of having a new baby, I’ve set it all up again today and came back to look at your video! It’s the best tutorial on this machine!
Really nice machine, I have no idea if it matters or not, but I always run mine at less than full throttle, usually 800 spm, I can't bring myself to floor the thing right out of the gate.
Running it at 1000 SPM is okay with standard thread (for the most part) - but lowering to 800 will create less stoppages and thread breaks. Also you need to lower it to like 600 for specialty threads (like metallics and stuff). It totally does matter, great comment :)
I have the PRS1000, and just recently got the PR1055. I usually do the “tie in method” not sure if you’re familiar with it, to tie in my new thread color and make it faster to thread the machine. Have you ever done that with a multi needle machine?
very helpful video! I need definitely more videos about this machine, mine has arrived today and would like to learn more about it and also about digitizing my own designs, for example. Do you think, you will make such a video in the future? Greatings from germany :-)
I plan on doing a LOT more videos with this machine, I've just gotten caught up with a ton of other projects. Feel free to give me some ideas of what you'd like to see :) I already have a tutorial on digitizing graphics here: ua-cam.com/video/fYkRXdyTYaA/v-deo.html That should help you get started :)
Thanks a lot for your tutorial. I would like to have a few clarifications: how do you transfer your drawing on your machine and what is the format of the file ? Have a nice day, and thanks again
Your videos awesome. Thank you. I just purchased the 1055X and your video was very helpful. Do you know if the Babylock Alliance metal bobbins are compatible with the PR1055X?
Can any of your future video on this machine showcase baseball cap embroidery features and accessories? T shirts breast pocket area , back and sleeve embroidery, to give you a few more video ideas
Absolutely! I plan on doing a ton of content with this machine - and this isn't an excuse, but I have a ton of other things I do beyond making tutorials - so when I'm able to, I'll certainly share that when I have time to film and edit that :) Thanks for the recommendation!
Idk if you'll see this ,but I was wondering if you can make a tutorial on how to put your design through the wifi . I have an iPad pro and been struggling to figure it out
Just got this machine! thank you for the video - it was very helpful. Looking to scan a fairly simple image in the machine and then embroider it. Having a problem with the sequence and making everything work. Do you plan to do a tutorial on this function? I realize there is a digitizing s/w and process out there, but looking to see what the machine itself can do. Thank you for your help, your work is amazing!
I have watched several embroidery machine videos. By far, your presentation was the best. Excellent photography, great explanations. I do have one question- and I should add that I don't own an embroidery machine yet as I am contemplating buying one. Do you buy prewound bobbins or do you wind the bobbin? Is the bobbin thread typically always white?
So with my smaller units I wind them myself using 'machine embroidery bobbin thread' manually (either black or white) - for this PR1055X, I buy premade (L-Type) Bobbins with a magnetic backing. They come in black or white. This machine doesn't actually have a function to wind its own bobbins, but all smaller units do. Hope that makes sense!
My first UA-cam video watched today is yours. Waouuuh ! Thank you, you explain so well, i just slow down the speed because i am only a poor little French embroiderer... 🧝♀️ I owned a PR600, and now a PR1050x. Do you know differences between PR1050x and PR1055x ? Frame maxi size, screen size, embroidering, automatic cutting thread between small spaces or letters (your embroidery back side is also very very clean). I'll ask Google and UA-cam too, of course, but you explain sooooo well. Wish future videos.
Yay! Thanks for watching :) I think most of the changes have to do with the software, cameras, and precision of the stitch work on this machine. The design elements alone on the touch screen are much more robust. Very happy you enjoyed this! Hope it was helpful
@@TockCustom Tanks 😘 Do you think I'd rather sell my used pr1050x to get a pr1055x ? Only 121 stitches from the previous owner and me. With many frames, jumbo, magnetic, for sleeves, pockets, caps, borders, scanning frame, table, etc. I bought it for my job. I saw differences are not huge with pr1055x, my upgrade been done. But about stitches quality I don't know. 🙂 Following you
perfect video! thank you very much! video includes; ip nasıl takılır ip renkleri ile makineye kayıtlı ip renkleri nasıl eşleştirilir, revize edilir, bobin içerisine ip nasıl takılır, makineye takılan levha nasıl sabitlenir, ayarı nasıl yapılır,
video is awesome, but there is just 2 or 3 videos related with PR 1055X Needle embroidery machine. could you please take another video related with how to use machine ? yesterday my machine way writing "Fenerbahce" --> machine wrote "Fener", then the rope is broken. I could not start the machine exactly where we remain.. thanks for your kindly support
There are not a whole lot of videos showing how to load the fabric on the machine from start. I just got mine and needed a little jump start from you to do it.
What embroidery software do you use to create all these custom designs with? I have a mac and hope to figure out an good beginners software to create my own characters and designs to embroidery.
After using the screwdriver they provided with the frames for first 2 weeks I got a very bad pain in my right hand palm. Couldn't do any work with that hand for couple of days. Since then I am using a normal screw driver and my hand is not hurting. I hope it is not bad for frames. Did you like the screwdriver they provided? I am running my machine at 500spm if I switch to 800spm my machine moves the table(ikea bought) so badly that it feels like something will break.
I didn't notice they gave a screwdriver until I set this all up, so I couldn't say lol. I did get the actual rolling mounted table for the machine - I can run it at 1000spm with standard embroidery thread, but I noticed is was a bit more reliable at 800, and I was told if you use specialty threads (like metallics or glow in the dark thread) to go at about 500 or less. The faster the SPM, the more friction and heat it produces, and can snap (actually melt) the thread. So a slower SPM will typically get you cleaner results.... it just takes twice as long
YOU are the PERCECT Instructor. No details left out - BUT more important - not jam-packed with oceans of words to dilute the clarity. This is a VERY high technological piece of machinery that you calmly and clearly pointed out what a user needed to know. I had commented when I first became a Patron that you INSPIRE..... Thank you again and I'm looking forward to learning even more from you about the "Big Picture" of running a successful venture like yours.
I cannot thank you enough for such a thoughtful and fantastic comment here - I love making videos and comments like this show me how much people like you appreciate them! I'll have lots more stuff throughout the winter, thank you very much for your support along the way!
You are a natural teacher!
Thank you, Debbie! I just love sewing, so I'm glad that these videos translate well :)
all the shots and transitions are so crisp and your ability to explain things so clearly is very admirable!! this video rocks!
You should see my outtakes lol - seriously though, I appreciate it! All this work is so worth the final result in these videos :)
Can't wait to help you with some of your projects!!
I want to get this machine just because you made it look so easy!! 😆
I use to work at company that had 1 4-head brother embroidery machine and 2 6-head embroidery machines, that I would run all the same time, and I really miss it. Sadly, that business closed down a couple of years ago!... If I had the money I would for sure get one (or 2) of these machines!
Oh for sure, if you can stay disciplined, you can basically print money with machines like that. Plus, you can obviously make crazy stuff nobody else can do!
This was one of the best videos I’ve seen of clear instructions for any multi needle machine. Thank you please continue to make videos.👍🏾💐
I have no plans of ever getting such an amazing machine but I fully enjoyed watching the unboxing and this video as well. Those patches look amazing!
Glad you enjoyed it! Took me a long time to work up to something like this, but I'm so happy I did :D
I just discovered you today and was so impressed I already made a donation. Trust me when I say for me to do that...you hit the nail on the head!!! You were clear and on point and you have the perfect tone in your voice!! Thanks so much. Looking forward to seeing more of your tutorials.
Oh my god, thank you SO MUCH for that donation! I truly appreciate it, seriously!!
Very happy this was helpful and you enjoyed this video - I'll be sure today's lunch is in your honor
@@TockCustom just now seeing that you replied!!! Now bring on more videos with the 1055x I was still in dreaming of getting one of those machines when I messaged you but NOW! I have one!!! Thanks to my husband!!! I need to know how to use it more. How to put in the needed stops for appliqué, how to hoop hats and use the camera, how to use the scanner etc etc!!! When to change needles based on fabric choices, how to handle metallic thread....the list is endless!
I will never complain about threading my sewing machine ever again!!! 🤣
lol right!? It's not as bad as it seems, its just like threading the same machine 10 times :)
Thanks for watching!
Pls how mach will cost
Thank you for a great video. My machine was delivered yesterday, still haven’t turned it on but I’m anxious to give it a run after watching your startup video. Going to check out more of your videos on the PR1055, your instructions are so crisp and clear, you’re a thorough teacher.
I absolutely love the way you explain things. So easy to watch you and understand. Thank you
Thank you so much for your clear instruction, with your you tube channel I have been able to understand how to use my
PR1050x. I bought machine in 2019 and because of your channel I really got to embroidery . Many thanks
Oh excellent! Yeah I did a demo on the PR1050X last year, and it's pretty much the same, so you should be good to go :)
Thank you so much for the best video around. Amazing teacher!
Embroidery does require plenty of work before any work is started and that machine is extra special and can make the task so much easier by doing everything electronicly. I have a very large patch which I purchased from the area air force base to put on a jacket I have, but have not put it on yet. I wondered how much work went into making this patch and now I know after viewing your video and love how that machine works.
Yep, just like sewing is 5% sewing, and 95% cutting, measuring, pinning, and planning - same goes for embroidery. I guess that goes for any craft - and the results are always worth it :)
@@TockCustom Fully agree the percentages of actual sewing vs all the other parts. Especially when you are designing your own items as I have been designing and making bags and the sewing is by far the quickest part of the whole operation.
WOW! I just retired and this is sure a top contender to augment my income. The unboxing went smoothly, setup seemed uncomplicated and the threading looked ez-pz! Looking forward to your tutorials on this magnificent machine Tock, great job, and those patches are flawless! 👏👍
I've had this setup for 3 days, and already got a $600 commission for one day of work - you can certainly make some decent income with a machine like this :)
Thanks for watching!!
As usual, your videos are so amazing, i love how you explain details step by step, you are a very good teacher!!! Thank you again..
Thank you so much! I don't feel like a great teacher, but I do love it! 😀 Thanks for watching
So happy I found your channel. I just got this machine 3 days ago and haven't had my intro class. You explained everything so clearly. Can't wait to see more from you and get stitching. Thanks
I'm excited for you to start making and modifying some awesome new projects!! Thanks for watching, hope you have a wonderful weekend
I'm glad I found your channel, your tutorials are amazing...
Thank you so much! I appreciate the positive feedback :)
you are my go to guy!!! thank you so much. Even my husband watches you now, and is becoming interested to try some embroidery
Just love that auto threader, I could watch this machine for hours..........
Oh it makes it so easy! I was tempted to film the whole job... but 3 hours is a lot of footage lol
You are amazing ive seen so many reviews with embroidery and they always lack a certain element but your reviews are perfect infact your the one that actually got me into embroidery and I love the brother pr1055x its awesome its serious money but worth it even the pe design 11 is expensive but worth every single penny like your worth your weight in gold carry on with the good work and ill look forward to many many more reviews about the pr1055x take care buddy
This video was a lot of fun to put out, and oh my goodness is this machine precise! Happy it was helpful, excited to show more soon :)
This was a great video I haven’t got my 10 needle yet but will use this as my guide when I do. Thanks so much.
Wow! I purchased a Brother Entrepreneur 6- Plus Saturday and even though the threading was a little different, all the rest of the tutorial was spot on to what I needed! I struggled all weekend trying to figure it out reading the manual to no avail, and then I found you. I think I’m in love! Thanks for showing these instructions so even a child could learn!
Thank you for your simple explanation I understood you clearly with your instructions were great for a new owner to understand.
Just came across your videos and thoroughly enjoy how well you explain everything. Was wondering if you have tutorials on how you made the designs before stitching them.
Great video!
You are very patient person, nice work!
So happy to find you. A real life saver. Thank you so much.
Happy to help! Thank you for watching 😊
This video makes me want one of those badly lol!! I don't even sew or anything, and now I want to!!
lol I know what you mean 😊
Thank you Tock very much for this demonstration. I am French and do not speak English so I watched without sound but I understood your demo correctly. I already have a Stellar and I really want to switch to this machine but I wanted to observe how it worked. You are very calm and I really liked your video. Maybe I'll make up my mind but the coil system seems to me to take a long time to install. I also hope that we can put magnetic frames.
Thank you! I am sharing this with my Advanced Sewing Students so that they may learn to use our 1050X.
Thank you! You are amazing bro. Teaching is your gift, i hope you know that.
I must say, that I owe you my first embroydery
Marsu from the FrenchWestIndies
It is nice to hear your over grave voice on this subject...
Thumb UP !
And I suscribed...
Thank you so much! I'm considering buying one of these and you just helped me tremendously!
Glad I could help! Hope you make some wild projects!! 😀
Thank youuuuu!!!
You are so good at explaining, everything was very clear I now know how to thread my machine ! 😊
You are such an awesome teacher!! Thank you so much!
Thank you very much! I just really enjoy trying to help people. I appreciate the positive comment 😀
Another awesome video my friend. This machine is amazing. The fact that everything came out so crisp is a huge time saver. Just think of the things you can make on this thing!
Now I just need a HUGE embroidery of you wearing a big red cowboy hat!! I think I could make that happen :)
@@TockCustom lol, that would be hilarious.
Thank you for this video!! I just purchased my PR1055X and I was getting so frustrated with my thread breaking every time I tried to stitch my first pattern. I definitely missed the last hole before threading the needle. You are a life saver and a great resource!
You are welcome! Oh also make sure you close the metal thread guide on the top rack before you start your embroidery as well, that makes a HUGE difference 😊
Hi how much does this machine cost?
What a great new toy for you! Looks like you’ll get a lot of use out of it.
Omg I'm going to be running this machine like crazy!! Thanks so much for watching :D
Thanks for the detailed explanations of each threading position. You make everything look so easy.
Glad it was helpful! It's not too hard when you break it down into steps :) Thanks for watching!
You explained all that so simple I actually got that... Now I have hope to learn my new machine... It can be so intimidating:) Ty
I purchased the entrepreneur 6 plus pr670e recently, with the hat hoop and the durkee hoops deal and the mighty hoops shirt station with extra magnetic hoops , ill be doing polos and hats, got the pe design 10 at a great deal on eBay and have been learning the software , I’ve already sold many shirts embroidering with the se600 and look forward to building a home business to supplement income that is both fun and enjoyable, i hope to see more instructional videos from you, thank you
Thank you the best and I like how you did waste fabric or stabilizer you are awesome
I too enjoy watching your videos. I would like to request: Can you please do a video on how to do stippling only on the PR 1055 X machine This would be most helpful to me to use this on our largest hoop ( the 360 x 200) also I have the jumbo hoop where you turn the hoop and scan the snowman for the 2nd half of the design.
WOW You did such a good job! You are a great teacher!
Great tutorial! Thank you for the excellent camera angles, and the wonderful explantion!
Am amazed by your explanation, simple and clear.Thanks
Great video
And I hope to see more videos on the PR1055x
Can you do a video with the newer flat brim cap frame?
I don't have an embroidery machine, and I don't think I am getting a $20k one anytime soon, but your videos are so satisfying.
I totally understand, I was given this machine to help Brother with a bunch of really exciting projects. If you're interested in getting into some embroidery projects the SE-600 and PE-800 are great starter machines for between $350 and $700 which is great value.
Thanks for watching! Hope you have a great week :)
Thank you Bob Seger
Awesome video. I just bought the Brother PR670e 6 multi needle and need some direction. Once I get my 6 threads loaded and load my design how do i assign those 6 threads in my design that has 20 steps. I can’t find it anywhere in the manual where is shows you how to assign the threads to your design. Can you do a video on that. I know you used only 3 threads but didn’t show how you assigned what color to what step. I hope i’m explaining it clearly so you know what I need to know. Thank you for any help with this.....😃
Oh for sure, I understand, and yes... I didn't really cover that in this video. I've been working on some other projects, but I'll try to do a more robust 'threading and colors' tutorial for this machine soon! Thanks for the suggestion!
Hope you have a terrific week Mary!
I would also like this...but also would like to know how you can keep the thread assignments between hoopings of the same design. It seems my designs, which I assign thread colors to (ie, in the design, I’ll say Madeira 1800) but that doesn’t seem to carry over to the machine when I load the design. I’m stuck using the dreaded magic wand each and every time...even though I’ve anchored Mediera 1800 on a certain spool. The manual is of no help.
Fantastic machine . It looks like Christmas came early for you.
It is a fantastic machine, and Christmas certainly did come early!! Thanks for watching!
Wow! What a great machine! That was fabulous! Thanks
For sure, this thing is incredible! Can't wait to continue showing what this thing can do :)
Thanks for watching!
I just got this machine and the one thing that has me bewildered is the threading selection. I managed to set the machine up and even the wifi and got it threaded. But my confusion comes when I go to the screen and all the numbers are in the needle positions. I can't seem to get them changed. I found a page that has a clear settings button. I presses that and it cleared on that page but not when I went to embroider. So, I'm going to look to see if you have any videos explaining more about the thread selections. The gal at the store said for me not to pay any attention to the left side of the screen when looking at the colors. Confusing. Thank you for your time. I just saw you on Sewing Machines Plus and think you are amazing!
We just got a pr1055x. Can you do a video on continuous embroidery? We’re making a style of guayabera embroidered shirts. Love your videos TC! Thanks!
They look awesome great job explaining everything thank you
Thanks for watching! This was so much fun!
Great video! Waiting for our machine to come in!
I just got this machine. I'm gobsmacked. My eyesight is failing and I would like to know how I can switch spool colors and spool numbers so that if I have green on spool 3 but would like to switch green to spool 9, how would i do that??? This is the best tutorial I have found. You are a master instructor..
Amazing video , very helpful and super cool ur teaching 👌❤️🔥
IT SEEMS WAY SIMPLE THAN WHAT IT ACTUALLY IS
Thank you sooooo much. I love how you explain everything.
You're so welcome, thanks so much for watching :D
The quality looks AMAZING!
This is my 4th embroidery machine.... the results blow every other machine away! And these were just simple 3 color patches. Can't wait to see what else this can do :)
@@TockCustom I hope you post - I would love to see as well! :)
Excellent tutorial!
Thank you very much 😊
Great video ! I just bought this machine and I am completely new and naive with embroidery. I was wondering if you can do a video on how you placed these patches on the clothing afterwards as well as how to create or design .
Thanks! I did a different video using my PE-770 to make a bunch of patches, and how to add fusible webbing, that video might be helpful. Once that was done, I just cut them out, ironed them onto a bunch of jean jackets, and then stitched around the edges to secure it in place :)
I also have a video on how to design custom graphics too which should be helpful
Where did you purchase machine
Hi! Thank you so much for this video. Do you have any recommendations on how to design custom embroidery for this machine?
Great video! Please do more 😁 I’ve just purchased this machine 😍
You got it! I've been doing a TON of new stuff, and will have lots to share between PE Design 11, and this new machine. Thanks for the comment!
@@TockCustom I’ve left my machine a couple of months because of having a new baby, I’ve set it all up again today and came back to look at your video! It’s the best tutorial on this machine!
Really nice machine, I have no idea if it matters or not, but I always run mine at less than full throttle, usually 800 spm, I can't bring myself to floor the thing right out of the gate.
Running it at 1000 SPM is okay with standard thread (for the most part) - but lowering to 800 will create less stoppages and thread breaks. Also you need to lower it to like 600 for specialty threads (like metallics and stuff).
It totally does matter, great comment :)
I have the PRS1000, and just recently got the PR1055. I usually do the “tie in method” not sure if you’re familiar with it, to tie in my new thread color and make it faster to thread the machine. Have you ever done that with a multi needle machine?
Awesome tutorial, the best I’ve seen. Thanks!
loving the unboxing and tutorial with this
Really appreciate the support! These have been really fun to make :)
A new amazing tool to help with your workflow.
Exactly! This is going to be a huge time saver and make some even bigger projects :D
very helpful video! I need definitely more videos about this machine, mine has arrived today and would like to learn more about it and also about digitizing my own designs, for example. Do you think, you will make such a video in the future? Greatings from germany :-)
I plan on doing a LOT more videos with this machine, I've just gotten caught up with a ton of other projects. Feel free to give me some ideas of what you'd like to see :)
I already have a tutorial on digitizing graphics here: ua-cam.com/video/fYkRXdyTYaA/v-deo.html
That should help you get started :)
Thanks a lot for your tutorial. I would like to have a few clarifications: how do you transfer your drawing on your machine and what is the format of the file ?
Have a nice day, and thanks again
Awesome video can you tell me what size and where to purchase the stablizer for that size hoop. Thanks in advance.
Your videos awesome. Thank you. I just purchased the 1055X and your video was very helpful. Do you know if the Babylock Alliance metal bobbins are compatible with the PR1055X?
Awesome video looks like a great machine. Thanks for the great tutorial.
You're very welcome! Thank you so much for watching :D
Excellent camera work - great intro video.
Does this machine stitch different types of stitch like satin stitch,back stitch,lazy Daisy, knot etc.
Can any of your future video on this machine showcase baseball cap embroidery features and accessories?
T shirts breast pocket area , back and sleeve embroidery, to give you a few more video ideas
Absolutely! I plan on doing a ton of content with this machine - and this isn't an excuse, but I have a ton of other things I do beyond making tutorials - so when I'm able to, I'll certainly share that when I have time to film and edit that :)
Thanks for the recommendation!
Idk if you'll see this ,but I was wondering if you can make a tutorial on how to put your design through the wifi . I have an iPad pro and been struggling to figure it out
Yeah I can totally do that, that would be pretty quick and fun :D
Just got this machine! thank you for the video - it was very helpful. Looking to scan a fairly simple image in the machine and then embroider it. Having a problem with the sequence and making everything work. Do you plan to do a tutorial on this function? I realize there is a digitizing s/w and process out there, but looking to see what the machine itself can do. Thank you for your help, your work is amazing!
I have watched several embroidery machine videos. By far, your presentation was the best. Excellent photography, great explanations. I do have one question- and I should add that I don't own an embroidery machine yet as I am contemplating buying one. Do you buy prewound bobbins or do you wind the bobbin? Is the bobbin thread typically always white?
So with my smaller units I wind them myself using 'machine embroidery bobbin thread' manually (either black or white) - for this PR1055X, I buy premade (L-Type) Bobbins with a magnetic backing. They come in black or white. This machine doesn't actually have a function to wind its own bobbins, but all smaller units do. Hope that makes sense!
Well now I’m looking for a reason to buy one of these machines! 🤪
I totally know what you mean! This thing is crazy high quality :D
great video have a super awesome day!!
How to you cut out your patches. To you use the brother cutter?
My first UA-cam video watched today is yours. Waouuuh ! Thank you, you explain so well, i just slow down the speed because i am only a poor little French embroiderer... 🧝♀️ I owned a PR600, and now a PR1050x. Do you know differences between PR1050x and PR1055x ? Frame maxi size, screen size, embroidering, automatic cutting thread between small spaces or letters (your embroidery back side is also very very clean). I'll ask Google and UA-cam too, of course, but you explain sooooo well. Wish future videos.
Yay! Thanks for watching :)
I think most of the changes have to do with the software, cameras, and precision of the stitch work on this machine. The design elements alone on the touch screen are much more robust. Very happy you enjoyed this! Hope it was helpful
@@TockCustom Tanks 😘 Do you think I'd rather sell my used pr1050x to get a pr1055x ? Only 121 stitches from the previous owner and me. With many frames, jumbo, magnetic, for sleeves, pockets, caps, borders, scanning frame, table, etc. I bought it for my job. I saw differences are not huge with pr1055x, my upgrade been done. But about stitches quality I don't know. 🙂 Following you
hello. have you ever changed these piece? brother thread presser base lower assy? do you have any videos? or anyone have an idea how to change it?
I'm sorry but I've never had to. Hopefully someone at brother support would be able to help with that? Forgive me for not having a better answer
perfect video! thank you very much! video includes;
ip nasıl takılır
ip renkleri ile makineye kayıtlı ip renkleri nasıl eşleştirilir, revize edilir,
bobin içerisine ip nasıl takılır,
makineye takılan levha nasıl sabitlenir, ayarı nasıl yapılır,
That is so awesome!!
Thanks a ton! I had a blast making this video :)
Hi, can I ask what software did you use to create the embroidery designs?
Thanks and a great video!
video is awesome, but there is just 2 or 3 videos related with PR 1055X Needle embroidery machine. could you please take another video related with how to use machine ? yesterday my machine way writing "Fenerbahce" --> machine wrote "Fener", then the rope is broken. I could not start the machine exactly where we remain.. thanks for your kindly support
Best review and the tutoria video ever 👏👏👏
Excellent tutorial, thank you for sharing!
Amazing work!
Excellent! I smashed the subscribe button ❤️
Much appreciated! I always think its funny when people "Smash" that button 😊
There are not a whole lot of videos showing how to load the fabric on the machine from start. I just got mine and needed a little jump start from you to do it.
Will you make a video on how to digitize on the actual machine?
Yes! Since this machine can do that, I totally will. There are a ton of options though, so I need to get very familiar with it first
What embroidery software do you use to create all these custom designs with? I have a mac and hope to figure out an good beginners software to create my own characters and designs to embroidery.
I use PE Design 11, which is great, but wont work on MAC's - I don't use a MAC so I have no idea what software to recommend. Sorry dude!
Gosh, I love this video! 😍
After using the screwdriver they provided with the frames for first 2 weeks I got a very bad pain in my right hand palm. Couldn't do any work with that hand for couple of days. Since then I am using a normal screw driver and my hand is not hurting. I hope it is not bad for frames. Did you like the screwdriver they provided?
I am running my machine at 500spm if I switch to 800spm my machine moves the table(ikea bought) so badly that it feels like something will break.
I didn't notice they gave a screwdriver until I set this all up, so I couldn't say lol.
I did get the actual rolling mounted table for the machine - I can run it at 1000spm with standard embroidery thread, but I noticed is was a bit more reliable at 800, and I was told if you use specialty threads (like metallics or glow in the dark thread) to go at about 500 or less.
The faster the SPM, the more friction and heat it produces, and can snap (actually melt) the thread. So a slower SPM will typically get you cleaner results.... it just takes twice as long