My opinion, might be easier to attach the front and back if the 2 side bolts were left a little loose, then tighten all the bolts after the front and back are set.
I've been trying to figure the interior head clearance of one of these.. I have a 2016 Tundra so I understand there may be some differences. Can you tell me high above the cab roof line the roof line of the RSI cap is? And can you measure from the bed side of the Ranger to lowest cross beam of the RSI roof? I've tried emailing the company quite a few times to no avail.. Any help would be appreciated..
Nice video. Are there available screens that can be installed for the sliding window so someone can sleep in the back and have venting or is there a screen already installed there?
Why stop at the taillight? Did they send you the wrong one like they did me and you don't want to throw shade on your product?!! Also, installing requires drilling of the bed, would be nice to know the best place to do that.
Thanks for showing all the process installation. Couple of Q: -does it leak? Planing of transporting my musical instruments at the back adn also a PA system -is it suited for dogs as it has vent on the roof? Could be here a water problem, driving a truck in a rain? -can tailgate be opened while RSI is still closed? I have a metal protector on tailgate with about 3mm height... Thanks in advance! p.s.: I just love AIC tunes as a background music
It has been super watertight for me. Remember, you still have any OEM bed/ tailgate gaps, so if it’s wet and you are parked on a hill you might see a drizzle of water from those spots in the bottom gutter area. I use dry bags for my full time bed gear like vehicle recovery kit, overnight bags, etc.
@@MainLineOverland many thanks! I have a rubber mat on the floor to and try to park car with nose higher than tail and it worked for me till now...also used some silicone around toneau and it works...tailgate can be tricky as whole bed has in declination towrds the cabin, but parking car with nose higher in mind does the trick...
At 12:00, what exactly did you use for the foam spacer and where did you get it? It’s such a huge gap and was wondering how yours worked out so far and if you have any tips or after thoughts.
What ate the measurements of the side panels and also the measurements of the solid side panels if known. What is the measurement on the mounting tracks on top of the topper.I also have the Ford ranger
Thank you for the video. Interested in your opinion on the side bins. At close to $500 was thinking of making myself from plywood or pvc. What would be required to mount? Could you attach angled metal bars and through bolt? Thank you
I HAVE A QUESTION WIN WILL THE SMARTCAP BE AVAILABLE FOR A FULL SIZE G,M,C TRUCK I HAVE HEARD THEY ARE OPENING A MANUFACTURING PLANT IN THE U.S.A.? IN TEXAS.
We believe so, but they have a big backlog of current model orders they are working through, so it will take some time before they offer additional fitments likely.
Can you leave the topper closed with the bed open? I carry my kayak in the truck bed with a bed extender sometimes just wondering if that would be a issue? Wouldn’t want the topper in the open and up position driving.
I have a 2014 Ranger and will be buying this Smartcap... Does the rubber seal between the canopy and the truck bed come with the Canopy or do I have to purchase it separately? Thanks in advance. Bryan
At the time the 3rd brake light wiring kits were not included by the distributor. You actually need to contact the folks at SmartCap to get that adapter.
Tom, just wondering, you know how Rangers tend to come at a downward angle (by a couple inches) from the factory. Did the weight of the RSI Smartcap help to level out your Ranger?
Yes, the Ranger does have a bit more rake, but it also has a higher rated payload. I already had the ARB Bumper and winch on at the time of this video, so my rake is somewhat skewed by that front weight. The cap did bring the rear down an inch or two from stock height. I now have an OME 2.5” lift kit and with this kit you can tune the rake with several front and rear spring rate options. About 9 months on I have used the cap in every way imaginable, and am very happy with it. I have since advised Ranger customers who are installing themselves to find a dense foam spacer and use a light duty double sided tape to deal with the cabside bed wall. One piece of dense foam cut to both traverse the gap and seal the side rails will do the trick. 👍
How tall is the cap from the bed rails? I am looking into this cap for my Tremor, but I still want to park it in the garage. My antenna clears the garage door by a couple of inches, but I know this cap sets higher than the cab.
It’s a part of the truck now. I have load bars on the roof tracks and have carried a RTT and Kayaks, so that’s a nice option I didn’t have prior to the cap.
Where you guys address is , is it in California? I’m from California Orange County area, I would like to purchase it that cap. Please let me have the address
Looks so good! Can’t wait to get one on my Tundra.
My opinion, might be easier to attach the front and back if the 2 side bolts were left a little loose, then tighten all the bolts after the front and back are set.
That's a sweet setup I like that
Waiting for my smart cap for my Tacoma looks like a quick build.
Hallo zur Befestigung :waren alle benötigten Löcher schon da?
I've been trying to figure the interior head clearance of one of these.. I have a 2016 Tundra so I understand there may be some differences. Can you tell me high above the cab roof line the roof line of the RSI cap is? And can you measure from the bed side of the Ranger to lowest cross beam of the RSI roof? I've tried emailing the company quite a few times to no avail.. Any help would be appreciated..
YOU CAN EMAIL THEM INTIL HELL FREEZES OVER THEY DO NOT GIVE A SHIT.???
Tom,
Thanks for your video. I also have a Ford Ranger. Will my Swing Cases still fit after installation of the two support brackets near tailgate?
Nice video. Are there available screens that can be installed for the sliding window so someone can sleep in the back and have venting or is there a screen already installed there?
GOOD QUESYION
Why stop at the taillight? Did they send you the wrong one like they did me and you don't want to throw shade on your product?!! Also, installing requires drilling of the bed, would be nice to know the best place to do that.
why drilling of the bed?
How do you like it so far? Is it holding up well?
Thanks for showing all the process installation.
Couple of Q:
-does it leak? Planing of transporting my musical instruments at the back adn also a PA system
-is it suited for dogs as it has vent on the roof? Could be here a water problem, driving a truck in a rain?
-can tailgate be opened while RSI is still closed? I have a metal protector on tailgate with about 3mm height...
Thanks in advance!
p.s.: I just love AIC tunes as a background music
It has been super watertight for me. Remember, you still have any OEM bed/ tailgate gaps, so if it’s wet and you are parked on a hill you might see a drizzle of water from those spots in the bottom gutter area. I use dry bags for my full time bed gear like vehicle recovery kit, overnight bags, etc.
@@MainLineOverland many thanks! I have a rubber mat on the floor to and try to park car with nose higher than tail and it worked for me till now...also used some silicone around toneau and it works...tailgate can be tricky as whole bed has in declination towrds the cabin, but parking car with nose higher in mind does the trick...
Do I need to remove my bed liner to install the brackets?
Nice installation
What are the future plans now for the ranger 🤔im thinking
I just might get one myself
Got some plans for it! Stay tuned to MLO's Instagram and UA-cam feeds.
nice job!!
How does water not get through the roof vent ?
There is a great video about this subject. It uses baffles to keep water out:
ua-cam.com/video/KijSedxopsQ/v-deo.html
At 12:00, what exactly did you use for the foam spacer and where did you get it? It’s such a huge gap and was wondering how yours worked out so far and if you have any tips or after thoughts.
Interesting!
What ate the measurements of the side panels and also the measurements of the solid side panels if known. What is the measurement on the mounting tracks on top of the topper.I also have the Ford ranger
Do you think these would fit the early 2000 model rangers ?
How much higher is the Smart cap over the cab once installed? I have a height restriction in my garage.
Thank you for the video. Interested in your opinion on the side bins. At close to $500 was thinking of making myself from plywood or pvc. What would be required to mount? Could you attach angled metal bars and through bolt? Thank you
Would be very tricky to mount wood ones. The SmartCap bins are very nice and worth the $$.
Where is time line location? Is there one in Los Angeles area? How much it coast if you put them together, and is warranty included?
I HAVE A QUESTION WIN WILL THE SMARTCAP BE AVAILABLE FOR A FULL SIZE G,M,C TRUCK I HAVE HEARD THEY ARE OPENING A MANUFACTURING PLANT IN THE U.S.A.? IN TEXAS.
We believe so, but they have a big backlog of current model orders they are working through, so it will take some time before they offer additional fitments likely.
Can you leave the topper closed with the bed open? I carry my kayak in the truck bed with a bed extender sometimes just wondering if that would be a issue? Wouldn’t want the topper in the open and up position driving.
Yes, I have transported lumber this way.
I have a 2014 Ranger and will be buying this Smartcap... Does the rubber seal between the canopy and the truck bed come with the Canopy or do I have to purchase it separately? Thanks in advance. Bryan
Hey Bryan, the Smartcap comes with the weather stripping included.
Any water or dust leaks?
So why not show how to install the third brake light wiring??
At the time the 3rd brake light wiring kits were not included by the distributor. You actually need to contact the folks at SmartCap to get that adapter.
Tom, just wondering, you know how Rangers tend to come at a downward angle (by a couple inches) from the factory. Did the weight of the RSI Smartcap help to level out your Ranger?
Yes, the Ranger does have a bit more rake, but it also has a higher rated payload. I already had the ARB Bumper and winch on at the time of this video, so my rake is somewhat skewed by that front weight. The cap did bring the rear down an inch or two from stock height. I now have an OME 2.5” lift kit and with this kit you can tune the rake with several front and rear spring rate options.
About 9 months on I have used the cap in every way imaginable, and am very happy with it. I have since advised Ranger customers who are installing themselves to find a dense foam spacer and use a light duty double sided tape to deal with the cabside bed wall. One piece of dense foam cut to both traverse the gap and seal the side rails will do the trick. 👍
@@MainLineOverland okay thank you. I’m pretty sure I’ll be getting a Smartcap- Sport with the half side bins on each side.
You level it out and the first time you load it, it will be sagging I would think. I'm keeping it stock for that reason.
How tall is the cap from the bed rails? I am looking into this cap for my Tremor, but I still want to park it in the garage. My antenna clears the garage door by a couple of inches, but I know this cap sets higher than the cab.
From the bed rails, the F-250/350 Smartcap is 600mm tall or about 23.6 inches.
...awesome....question: is it durable enough to put a rooftop tent on it?
Absolutely. The RSI has 330lb dynamic load rating.
@@MainLineOverland 700lb.?
Hello, does the 3rd brake light light up the canopy?
Full-size trucks have a look-through window built in. The Ranger cap does not have this feature, so no OEM bed light, unfortunately.
How do you like it so far? Thinking of getting one?
It’s a part of the truck now. I have load bars on the roof tracks and have carried a RTT and Kayaks, so that’s a nice option I didn’t have prior to the cap.
Where you guys address is , is it in California? I’m from California Orange County area, I would like to purchase it that cap. Please let me have the address
We're based on the East Coast with shops in Pennsylvania, New Hampshire, and North Carolina.
How much does it weigh???
180-200lbs, depending on the length and install hardware.
How much do these cost?
Check out current options and pricing here: www.mainlineoverland.com/collections/vendors?q=RSI