GE Dryer GTD72EBPN0DG - Diagnostic Mode & Error Codes
Вставка
- Опубліковано 11 вер 2024
- ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancev...
If we helped you, please support us and Subscribe to our channel!
www.youtube.co...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com..."
Much appreciated man. My would blink all the lights and when press play it would stay solid Lid a number 0, 1, 2 but nothing else. Pressed play and turn main knob at the same time and it started working.
Wow! Thank you so much for this great video. You are a wonderful person.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our UA-cam channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
How do you enter test mode on ge top washer deep fill dd quite wash
How
I have a similar dryer and it won’t even go into this mode. I changed out the power cord. What could be wrong?
Are you responding to any of these comments??.....if not then i need to go somewhere else
Yeah, I think I’m out
Does it work the same way for the washer ?
Mine won’t do anything when I try? It just continues to say drying cooling vent blocked ??
I followed the instructions but my dryer doesn’t go into diagnostic mode
turn it counter clockwise
Great video, thanks. I replaced the board and still have no power. No lights, nada. I’m looking for a fuse on this gas GE dryer but can’t find one. Any ideas? Unit is 1.5 yrs old. GTD72HBSN0WS
How can I change my personality setting? I had a power outage and need to reset mine back to 1
What did you end up doing? Having the same problem, it happens everytime we have a power loss.
How can I change the personality code ID?
Hey man! I took my top off and pulled a wire out. Not sure where it goes exactly…it’s the small yellow/green wire. Does it just attach in the same
Crimp as the big green/yellow down in the hole? Thanks
My dryer model. gtd75ecsl0ws doesn't go into diagnostic mode.
What is error code #10? Thanks.
I have that same code #10 what does this mean ?
Error Codes:
1. Inlet Thermistor Fail
2. Outlet Thermistor Fail
6. Stuck Button
7. Miss Wire (L2/N are miss wired)
8. Door Latch Stuck
9. Dry Load Detection Trip
10. Empty Drum Detection Tripped
11. Blocked Vent
13. Door Switch Signal Stuck Closed
14. Door Latch Pulsing Error
15. Door Switch Signal Stuck Open
19. Door Latch Lost in Run
My dryer isn't chiming when cyle is done can you help any ideas
Mine won’t heat!
Bueno día yo quiero ver como van los 3 cables que van a los tres relay de la tarjeta
Model GTD75ECSL0WS Code 3. Help please the dryer won't start
Mine too. Did you find a fix?
Is there a "door" error? That's all mine keeps repeating
Having the same issue so frustrating
Me too
How do I set control panel washer ge MoDuLE 75 EF the play keep flash I can’t turn on machine
I have a problem where you push the start button and it just click nothing comes on. What is that?
Have you fixed? I have the same issue just clicking when I push start
I got one just like this one but it won't do anything..it was drying suddenly stop working
When I lose power, I get the E7 code. How do I reset it? When I get to the number 1setting in diagnostic it turns into the digit number 7. I have tried to go to 13 in diagnostic to clear the code, turn on/off and back on; it does the same. In the past, I unplugged it for a couple of days, then it would work fine. You have to have the easy fix for me, I can't wait for days.
Would the Personality reset work?
a mONTH LATER SAME THING EXCEPT i UNPLUGGED BEFORE WEATHER. gOT NO BAD WEATHER, PLUGGED IN AND HERE WE ARE AGAIN.
Test 13 will not reset.
SOmeone? Anyone?
Ge pretty much sucks.
Show me how to fix the heat
What does code 10 mean
My GE sensor dryer 2019 doesn't have no power at all
My display doesn't light up
This did nothing😩
Sensl n9??
You stopped before reading number 10! That is what is blinking! It won’t start because it says door open, when it is completely closed! I’m so annoyed
GE dryer. Lights blinking
I can't get the dial to change the #'s my start button changes the number 1, 2, and 0...????
It will not run at all....
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Did you ever find out what was wrong? This is currently happening to my dryer.
Mine is 1 and 2 anyone know what those are?
Inlet thermistor and outlet thermistor. I have the same plus 9 and 10. I'm going to clear them and see if they come back. My dryer stopped drying.
Did clearing the codes do anything?
I have this exact dryer and it seems like the power is permanently off.
same thing is happening with mine, ever find the issue?
@@alwaysvic9125 someone came to look at it and said the electrical board is fried. I would have to get a new one for $450. So I decided to get a new dryer
Holy the fuck
I hate that you do it first try