Це відео не доступне.
Перепрошуємо.
Ford Ranger Accessory Switch Camping Light Installation - Raptor
Вставка
- Опубліковано 14 гру 2022
- #nextgenrangerraptor #ranger #accessories
This installation of STEDI Micro V2 7.8 inch 12 LED camping light in the Next Gen Ranger Raptor utilising the factory installed accessory switches. Follow along as Nate shows you how easy it is. This is really a game changer.
He will walk you through exactly where all the wires are located so you can plan where you want to install your accessories if you have the factory switches installed.
For more information contact:
sales@lovellsadelaide.com.au
(08) 8374 5500
15 Deloraine Road, Edwardstown SA 5039
Facebook: @LovellsAdelaide
/ lovellsadelaide
Handy video, thanks. I was hoping they left one of the auxiliary wires inside the cabin for the uhf, but will just have it to run it back in with the aerial cable.
Awesome vid straight to the point.just a note the arb or most other compressors will pull over the rated 15amp supply to the back tailgate wiring.
great info,, thanks!
those switches are avail on ranger versions as Premium pack, its about 1800 bucks, but gives you the pre wired switches, matrix headlights upgraded sound system - i ordered my wildtrak with the PP. just waiting for suspention to be delivedrd to townsville to upgrade gvm gcm pre rego.
ty for your video make it easy hey
Hi, really helpful video,
I'm thinking about spots or a light bar on the front but could you explain how lamps wired into switches 5 and 6 work with the matrix head lights fitted? Would they turn off automatically when a car is detected coming the other way?
Would be great to know. Thanks 👍
ARB/Ford air compressor can be optioned and is mounted inside the mudguard behind the tail lamp assembly. You will need to shield those tub lights from damage from loads in the tub.
How does that work? I thought the twin compressor required with 2 x 40amp fuses? This only outputs max 25amp?
@@Eddie_TurboThe compressor draws less than 25amps under load. It's Next Gen Ranger specific dual on board model made for Ford as a manufacturer accessory.
Nate great video. I have a Next Gen Raptor. Does Lovells have a GVM upgrade for this Raptor?
My Wildtrak was a dealer stock order and they did not specify the Power Pack, so no switches. Is the wiring there though and whether it is or not, is there a kit to fit them retrospectively? Also all UK Wildtrak come with plastic bed liner, as did my 2014 Limited. However the utility tie-down rail with heavy duty adjustable anchors is not fitted to the new Wildtrak. Is it possible to get these as a kit and how do you line up the attachment bolts with the plastic liner hiding the captive nuts? Pretty sure that the rails on the old Limited are attached using rivnuts or similar, because one rail is not level.
Does Lovells have a GVM upgrade for this Next Gen Raptor 2023?
Are the wires there from factory if the switches are not installed?
Hi mate, may I please know where did you get these new vinyl decals?
They come optional with the vehicle from Factory
Being a pick up those amber lights in that location
would last about 2 minutes as I tend to carry stuff in the back of my tub!
How do you bypass the "key on function" for these switches. Want accessories to work when the car is switched off. Stock they only work when ignition on
Or how do you turn off the headlights while using camp lights.
I haven't tried it in my Ranger yet, but apparently if you hit the on button WITHOUT depressing the brake, it turns on in accessory mode.
Hi, I need help. I'm staying in South Africa and my aux 5 and aux 6 can switch on no matter if the high bean is on or off. How do I sort this problem. Thank you.
Warranty issue take it back to the dealership
have you solved it? I am having the same issue