Same, I just bought a 2006 IS250 6spd manual. The body is 👌🏻😘🤌🏻 both underneath and outer. Interior looks complete but if you look closely it does need reupholstering but it can get away with out it. I’m so happy to own this car because these are becoming rare to find. Especially in good conditions.
@leonel9110 I agree, I also wish it had more power. It takes forever to get to 75mph on the interstate. I'm thinking about swapping a Lexus 5.0 V8 engine in it. It'll cost me a bit, but it'll be cheaper than buying a whole Lexus RCF in good condition. Plus it's something I can say I built.
This so cool, I am a Lexus Master Technician up here in Canada. I just performed this exact job 3 weeks ago and I wanted to record it like you did, but I didn't take the video. So thank you very much.
I own a Lexus IS200, it is certainly not a 250, but the engine, although it has 420,000 km, still works, and I must say, it has been used to the limit day after day, with several drifting sessions... excellent
Beautiful work. Over the last 25 years I have rebuilt MANY engines from 1.3L 3 cyl petrol to 351, 454, 572 cid to 16L i6 diesel Cummins, Detroit, CAT. You did an AMAZING job. Tbh while the engine was stripped down, it should've gotten performance parts 😉 LoL
Damnnnnnnnnnnnnnnn! bro you dudes rock!!! I've had this done to my car under recall.. WTF.... bad a$$.. I hope you guys are getting paid up in tha 6 digits!!!
That's an AWD if anybody was wondering. I noticed because on mine the motor mounts need replacing and on the AWD's these are different from RWD models.
Respect. I'm driving the GS450h 2006. For six months, I have a car problem, and no master can find me a problem. He does not report any mistakes, but he has a problem. It's about when I drive it a little faster, after 30-40 kilometers, the car starts to lose power at the moment when I add it to the gas. This power loss is felt in the first 2-3 seconds, or until it reaches 150 kw, then it has total power. At that moment, it started to empty my hybrid battery and pulled it to the last dash, and it is very hard to charge. I have to stop, to turn off the car to cool down a little and then everything works normally, until I come back again. 30-40 kilometers. The battery is new, I changed the pump in the changer, lots of things that I thought I should replace, and again I have the same problem.
So much for a rack time! good job, how much does this overhaul cost and where can one get this service in houston texas, my 18 ghibli is about to die just 40k miles, need to save the engine and not deal with the cost of a new drop.
I've done a few of these at my dealer. i wish we had that eng/trans dolly u have. i like doing them, but I can't beat the time, especially since they lowered it.
Hello, how are you. I'm about to make a 3.5 v6 camry engine, can you tell me if you use struts under the swings, or if they go straight into the valves. thank you
impressive i love this video....am from the Caribbean i have a Toyota Mark X 2008 that uses the same engine the 4GR FSE that's in the IS 250's ..i would love a tear down like this on my engine for good maintenance :) !!
I know this is a 7 year old video, I am also in the process of swapping out my motor 2GR, by any chance did you leave the wiring harness connected? I don’t know what else I need to do to drop the motor, currently took off the front wiring but I haven’t touched the back so I don’t know if I can simply disconnect it from the main box and drop it with the motor
Excellent work Robert. Question for a potential buyer of a used 2012 IS250 with 88k is this a good time to overhaul or should I wait till 115-120k? I'm thinking I should ask them to perform the service as part of the deal to buy.
What are the cost and benefits of an overhaul? Which milage is it recommended to do? and the main reason to overhaul an IS250? I have one 2007 IS250, and might possibly do it one day if it is worth doing
Is this for the CSP or Recall? Top engine cleaning ect? I took my car in for this after awhile the transmission started acting up. It wasnt noticebale at first then it got serious. with a torque converter problem. Many users have reported the same issue. At about 150K now.
I have a 2007 gs350 with the 2grfse engine 134k. It runs wonderfully still zero issues. Except, it does have a knocking sound like a worn rod bearing knock sound. I found that listening with a long screwdriver at the valve cover area near the high pressure fuel pump is the loudest knocking by far so not actually sure it's a rod bearing. Do these fuel pumps knock? Do these lifters or rockers go bad and knock? Thx community.
How many hours of labor you think its to do what you did but instead of taking the motor apart. just swapping with one that will also come with all the same parts on it. Because my is350 engine locked up and the engines come with everything like the intake makifold already on them. Looks like they just drop them and disconnect whatever is connected to it
Nice video. Can anyone tell where I can find some torque specifications i have a 2007 lexus is250 for example valve cover torque specifications i can't find any info.thanks
These engines, provided the owner follows the proper mileage/maintenance schedules will last a LONG LONG time. Remember, its a Lexus. The Japanese are very careful when they build an engine and they want the customer to be happy with the product. Unlike so many US manufacturers who want you to buy their cars made with mexican/chinese made parts in their cars and after you leave the dealership, they forget about you but are awfully glad you left your money with them!
my lexus ls430 2001 has 266000 miles. original starter and alternator. just replaced the radiator it was leaking. regular oil changes fluid changes, new brakes regularly, spark plugs and new belts and water pump every 100000 miles. it should last over 300000 miles.
I own a Lexus IS200, it is certainly not a 250, but the engine, although it has 420,000 km, still works, and I must say, it has been used to the limit day after day, with several drifting sessions... excellent
NIce, well this is a lot of work for a IS250. I have brand 4GR-FSE new long block direct from Toyota for sale if anyone needs one. 4 available and very well priced. Fraction of what the dealer will charge for a rebuild.
Just pull the hose off of the Positive Crankcase Ventilation 'PCV' valve, and leave both of those OPEN, that way you don't get oil vapors from the crankcase sucked into the intake tract. That is what is getting deposited on the intake valves.
First of all, the PCV system is necessary, and as a professional I would never just "pull off hoses" and leave it that way. That is no solution. You are correct that some of the valve deposits are from the PCV system. However, the new pistons and rings are redesigned to have less blow by, therefore causing less crankcase pressure. Inevitably leading to less valve deposits. It's also important to know that any direct injection engine (without port injection) will have valve deposits, that is unavoidable. The valves need to regularly cleaned and maintained with upper engine cleaning services.
Hi Robert I think my low mileage with short distance is probably considered as severe. I own an is250awd 2009, and I have only 55k KM (34.4K miles). I am living in canada with temperature ranging from -30C (-22F) to +38C (100F). Most of my rides are less than 5 miles each, mostly city driving (50%). What do you recommend for warming time in winter before moving the car ? What oil change schedule should I follow ( I use Penzoil synthetic oil twice a year) ? What are your driving and maintenance recommendations.? Should I expect a shorter engine life before a rebuild is required ? regards
haha , My IS 350 got a broken valve, Lexus Corp took care that prob for me when it was 140K now 275K the car is still running smoothly, Thanks for Mechanics Tony B. at Escondido CA
i stumbled upon this bc my 2011 is250 fsport with 25k miles just threw a CEL for misfire on cyl 6.. apparently no TSB for carbon and its a young motor miles wise.. have any thoughts? injector? coil?
I done timing chain on Lexus GS450h this week and I wouldn't rebuild one . I think less hassle to put second hand one than spending time with rebuild. How long did it take? A week I presume ? Cost of rebuilding would be to much in UK.
The V6 engine of is250 is an amazing artwork and I am so pleased to own an is250.
Same, I just bought a 2006 IS250 6spd manual. The body is 👌🏻😘🤌🏻 both underneath and outer. Interior looks complete but if you look closely it does need reupholstering but it can get away with out it. I’m so happy to own this car because these are becoming rare to find. Especially in good conditions.
@@gabrielfranco9786I got one too recently with a lot of miles but still drives like a dream just wished it had a little more power
@@leonel9110 tune it
Just such a liquid smooth motor isn't it.
@leonel9110 I agree, I also wish it had more power. It takes forever to get to 75mph on the interstate. I'm thinking about swapping a Lexus 5.0 V8 engine in it. It'll cost me a bit, but it'll be cheaper than buying a whole Lexus RCF in good condition. Plus it's something I can say I built.
This is beyond comprehension for most and I'm not totally convinced you're not an Alien! Thanks for sharing!
This so cool, I am a Lexus Master Technician up here in Canada. I just performed this exact job 3 weeks ago and I wanted to record it like you did, but I didn't take the video. So thank you very much.
Tony Caputo you in toronto?
Ponyboy glad to hear from you, not Toronto but Close enough I'm in Ottawa
What would you change for a service like this?
Hi, would you have any idea why the IS250 Engine would make tapping noise ? It’s not from the injectors tho
Avneet Narayan what year is the IS250, is the tapping at idle or under slight load
That's working in a shop, the challenge for the people do it at home.
Epic video! Thanks for sharing. Tech skills 10/10.
Having done this myself you make it look like art!
Thanks man! I'm uploading some recall vids soon
Robert Nitzky i've done a bunch of these and my bay is always a mess when im done. i dont know how you keep it so clean lol
Robert where is your shop located?
Robert Nitzky I need you for an is250 misfire lol.. wish I could hire you 👍🏼
I remember when this stuff was called industrial arts.
Simply awesome dude! The way your working on this car...you could work on any engine. Meticulous craftsmanship!
Next a 458 Italia!
This guy work like a machine
Very well done. Congratulations, very professional and clean
I have an is250 2006 with 203k miles on it and it is a very smooth engine, its 0-60 is performed in 7 seconds and no engine problems that all
I own a Lexus IS200, it is certainly not a 250, but the engine, although it has 420,000 km, still works, and I must say, it has been used to the limit day after day, with several drifting sessions... excellent
Beautiful work. Over the last 25 years I have rebuilt MANY engines from 1.3L 3 cyl petrol to 351, 454, 572 cid to 16L i6 diesel Cummins, Detroit, CAT. You did an AMAZING job. Tbh while the engine was stripped down, it should've gotten performance parts 😉 LoL
most cleanest video ever seen. its like an art
This video gave me goosebumps.....
appreciated, very professional
nice video. i love doing this job
beautiful job
Mad skills right there, great job
Thanks!
Damnnnnnnnnnnnnnnn! bro you dudes rock!!! I've had this done to my car under recall.. WTF.... bad a$$.. I hope you guys are getting paid up in tha 6 digits!!!
so clean!
What a great job
Man, that is crazy. I didn’t realize how big this engines are for a small car. Well, midsize.
That's an AWD if anybody was wondering. I noticed because on mine the motor mounts need replacing and on the AWD's these are different from RWD models.
i like this skill and guys..fabulous
Great video hope your still wrenching just did this on LS500 AWD.
shop floor immaculate ...god tier technicians.
you are a beast, amazing
Beautifull!
I've done a lot of these ZLA's. I enjoyed doing them but I don't miss the warranty pay.
I just want to say absolutely cool video amazing work now I remember why I stay to my simple caveman ls1 🤦♂️
l just brought a used lexus ls460l 2007 and it is a beast and smooth running car!
love it love the music too, who did that song?
Clever using what looks like an A4 filter case to hold the valves, I will have to use that trick later.
Such a luxury to have an open stall/space for jobs like these
Respect.
I'm driving the GS450h 2006.
For six months, I have a car problem, and no master can find me a problem.
He does not report any mistakes, but he has a problem.
It's about when I drive it a little faster, after 30-40 kilometers, the car starts to lose power at the moment when I add it to the gas. This power loss is felt in the first 2-3 seconds, or until it reaches 150 kw, then it has total power. At that moment, it started to empty my hybrid battery and pulled it to the last dash, and it is very hard to charge. I have to stop, to turn off the car to cool down a little and then everything works normally, until I come back again. 30-40 kilometers.
The battery is new, I changed the pump in the changer, lots of things that I thought I should replace, and again I have the same problem.
Very nice wark
I have the same car. Almost 90k miles. Carbon build on engine valves is my concern. Currently installing an oil catch can as preventative maintenance
So much for a rack time! good job, how much does this overhaul cost and where can one get this service in houston texas, my 18 ghibli is about to die just 40k miles, need to save the engine and not deal with the cost of a new drop.
I've done a few of these at my dealer. i wish we had that eng/trans dolly u have. i like doing them, but I can't beat the time, especially since they lowered it.
Hello, how are you.
I'm about to make a 3.5 v6 camry engine, can you tell me if you use struts under the swings, or if they go straight into the valves.
thank you
impressive i love this video....am from the Caribbean i have a Toyota Mark X 2008 that uses the same engine the 4GR FSE that's in the IS 250's ..i would love a tear down like this on my engine for good maintenance :) !!
I know this is a 7 year old video, I am also in the process of swapping out my motor 2GR, by any chance did you leave the wiring harness connected? I don’t know what else I need to do to drop the motor, currently took off the front wiring but I haven’t touched the back so I don’t know if I can simply disconnect it from the main box and drop it with the motor
Tres bonne video
I have a doubt. The VVTi engine 2GRFSE is the same VVTi at engine 4GRFSE? The mine is damage and i want to know if compatible. Thank you
Excellent work Robert. Question for a potential buyer of a used 2012 IS250 with 88k is this a good time to overhaul or should I wait till 115-120k? I'm thinking I should ask them to perform the service as part of the deal to buy.
This is the stupidest question I have seen on UA-cam ever.
True Master Tech.
What are the cost and benefits of an overhaul? Which milage is it recommended to do? and the main reason to overhaul an IS250? I have one 2007 IS250, and might possibly do it one day if it is worth doing
Is this for the CSP or Recall? Top engine cleaning ect? I took my car in for this after awhile the transmission started acting up. It wasnt noticebale at first then it got serious. with a torque converter problem. Many users have reported the same issue. At about 150K now.
What all did you do? It was so fast. Like did u just rebuild it or do upgrades as well?
Wish you could give me connecting rod bolt torque specs for this engine. No one seems to know . Nice job on overhaul!!
How long did it take you to get to where you are now?
What’s the secret to get the timing cover off? I’ve got all the bolts off but it won’t budge from near the bottom.
So precise work, but I ask this: Why? It looked alright to me
I have a 2007 gs350 with the 2grfse engine 134k. It runs wonderfully still zero issues. Except, it does have a knocking sound like a worn rod bearing knock sound. I found that listening with a long screwdriver at the valve cover area near the high pressure fuel pump is the loudest knocking by far so not actually sure it's a rod bearing. Do these fuel pumps knock? Do these lifters or rockers go bad and knock? Thx community.
How many hours was that homes....that was amazing
Can this be done without pulling out the engine? Just take off the heads and oil pan?
FULLLY SICKKK, that is all
Tht rebuild was quick
зачет профессионалам
Any advise on how to go about overhauling an 08 ISF?
How many hours of labor you think its to do what you did but instead of taking the motor apart. just swapping with one that will also come with all the same parts on it. Because my is350 engine locked up and the engines come with everything like the intake makifold already on them. Looks like they just drop them and disconnect whatever is connected to it
Nice video. Can anyone tell where I can find some torque specifications i have a 2007 lexus is250 for example valve cover torque specifications i can't find any info.thanks
how much does it cost to rebuild that engine plus labor work ? just wanted to know 😅.
Say if you want to do this to your car do you just take it to a mechanic place an tell them ?an how much would you say the price will be?
Can a motor from a Lexus is250 2 wheel drive go on an all wheel drive ?
My head gasket blew and the motor won't start. What should I do?
what was the course. had crashes? Replacing only the piston rings
I envy your skills! Bad ass!
Womder if this was the same type of repair as the recall for rough idling issue on my 2009 is250
Awesome! But how much did this all cost? :D
Excelente video man, is this engine reliable? I just bought a is250 2007 with 145k miles on it and so far a love it really smooth engine
DJ12Ema hows your car been?
I have a 2006 is250 with 219k so yeah it is lol
Bought an is250 with 265000km. Only replaced the oil and i think i need to swap motor mounts soon. Other than that it's running strong.
These engines, provided the owner follows the proper mileage/maintenance schedules will last a LONG LONG time. Remember, its a Lexus. The Japanese are very careful when they build an engine and they want the customer to be happy with the product. Unlike so many US manufacturers who want you to buy their cars made with mexican/chinese made parts in their cars and after you leave the dealership, they forget about you but are awfully glad you left your money with them!
my lexus ls430 2001 has 266000 miles. original starter and alternator. just replaced the radiator it was leaking. regular oil changes fluid changes, new brakes regularly, spark plugs and new belts and water pump every 100000 miles. it should last over 300000 miles.
I own a Lexus IS200, it is certainly not a 250, but the engine, although it has 420,000 km, still works, and I must say, it has been used to the limit day after day, with several drifting sessions... excellent
so the best way to get the engine out is from the bottom ?
why the the engine need work
how many flat rate hours did it pay , 20 hrs
Hey what’s the cylinder head torque specs?
I have a question. If you went to college what did you major in? My dream is to be in the automotive field; preferably a technician like yourself.
NIce, well this is a lot of work for a IS250. I have brand 4GR-FSE new long block direct from Toyota for sale if anyone needs one. 4 available and very well priced. Fraction of what the dealer will charge for a rebuild.
Just pull the hose off of the Positive Crankcase Ventilation 'PCV' valve, and leave both of those OPEN, that way you don't get oil vapors from the crankcase sucked into the intake tract. That is what is getting deposited on the intake valves.
First of all, the PCV system is necessary, and as a professional I would never just "pull off hoses" and leave it that way. That is no solution. You are correct that some of the valve deposits are from the PCV system. However, the new pistons and rings are redesigned to have less blow by, therefore causing less crankcase pressure. Inevitably leading to less valve deposits. It's also important to know that any direct injection engine (without port injection) will have valve deposits, that is unavoidable. The valves need to regularly cleaned and maintained with upper engine cleaning services.
oh god u the real beast ):!!!
How much did this particular overhaul cost?
Hi Robert
I think my low mileage with short distance is probably considered as severe.
I own an is250awd 2009, and I have only 55k KM (34.4K miles). I am living in canada with temperature ranging from -30C (-22F) to +38C (100F). Most of my rides are less than 5 miles each, mostly city driving (50%).
What do you recommend for warming time in winter before moving the car ?
What oil change schedule should I follow ( I use Penzoil synthetic oil twice a year) ?
What are your driving and maintenance recommendations.?
Should I expect a shorter engine life before a rebuild is required ?
regards
use regular thick oil, 5w30, always use 91 gas,
How long to drop engine and put back together without opening the engine? Just swapping another engine.
16 hrs
Hopefully the driveshaft flange bolts were properly tourqed this time.
Круто 👍🏻
So cool...
Engine Overhaul what is the cost ????
How many nuts and bolts were extra then?😉👍
5:05... what does he have connected there, to the intake manifold it looks like?
AC machine one of the couplings is located up next to the intake
Robert,
I am looking at an 06 GS300 AWD with 62k miles this week. If it has not had the ZLA completed, should I even consider it?
What’s a ZLA?
I want you guys to do the same on my 06 lexus IS350. How much?
Won't it be better to go for the 3.5l v6?
haha , My IS 350 got a broken valve, Lexus Corp took care that prob for me when it was 140K now 275K the car is still running smoothly, Thanks for Mechanics Tony B. at Escondido CA
Did you guys hone the engine block or did you just slap some new pistons and rings and call it a day?
These blocks can not be honed, they are specially coated. If they have excessive scoring or wear, the block is replaced.
+Robert Nitzky Ah ok.
How much would this service cost roughly?
What is the cost of that whole work being done
i stumbled upon this bc my 2011 is250 fsport with 25k miles just threw a CEL for misfire on cyl 6.. apparently no TSB for carbon and its a young motor miles wise.. have any thoughts? injector? coil?
John Smith nope. cleared the code and hasent come back lol
How do you like your job? Is it worth being a tech for this company?
I done timing chain on Lexus GS450h this week and I wouldn't rebuild one . I think less hassle to put second hand one than spending time with rebuild. How long did it take? A week I presume ? Cost of rebuilding would be to much in UK.
2 days, but it takes some real hustle
HI how did you put the timing back together did you use a diagram?
Timing chain is easy on these. All marked. No need for special tools etc...
Which state are you located in?
how much would a service like that cost?