Step Up Your DIY Game - Make a Clever Door Latch
Вставка
- Опубліковано 10 бер 2022
- Are you tired of the same boring door latches in your home? Looking to add some unique flair but don't want to spend a fortune? In this DIY door latch tutorial, I'll show you how to easily create your own one-of-a-kind door latch with simple household items.
Making your own DIY door latch is an easy weekend project that adds personality and customization to any room. With just a few basic tools and materials, you can design a fantastic door latch to add to your home's style. I'll reveal clever ideas to make a beautiful latch from items you already have at home.
In this video, you'll discover my best tricks for designing and crafting a unique door latch without special skills. I'll walk you through each step from making the latch to all the way through installation.
By the end of this DIY tutorial, you'll be able to create a one-of-a-kind latch to replace boring standard door hardware. With an artistic eye and a few basic DIY skills, you can make a beautiful custom latch. Your home deserves small touches that make it distinctly yours.
So if you're ready to learn how to easily craft a unique door latch to give your home a creative flair, make sure to watch this DIY tutorial now! I'll share my best tips for taking simple materials and turning them into a beautiful custom latch you'll be proud to show off. You don't need power tools or special skills, just enthusiasm and creativity.
Liking this video and joining the DIY family by hitting subscribe really makes producing this content feel worthwhile!
#diyideas
#diydoorlatch
#doorlatch
#diylock
#doorhacks
Блестящий, красивый. Декоративный замок для "дурака" (болт выкрутил-ригель вытащил) Но попытка засчитана😁👏
Музыка крутая, запор говно блестящее! Можно просто закрыть и проволочкой связать .
Эффект тот же. А если зимой ,то замок замёрзнет и хозяин не попадет домой😂
Петлю куда засов входит с одной стороны заварить с другой замок не даст засов вытащить.
Нужно было в ригеле отверстие под замок просверлить, чтобы замок его держал. Или заглушить ответную часть профиля, в которую ригель входит. А в таком варианте отломить ручку трубой или ударом молотка очень легко и тогда ригель просто вынимается.
Так я тоже думаю зачем замок когда можно винт выкрутить и вытащить в обратную сторону
Все замки для себя, чтобы ключ потерять, а ворам все замки по хын
@@rostov3670 вот вот,нужна только отвёртка
Muy buena amigo Dios sigadandole sabiduria
А ещё проще выточку из паза вниз сделать и винт туда опускать, тогда и замок покупать не придется.
Да🤣взял отвёртку, выкрутил болт,выдвинул ригель в сторону не снимая замок 😉
Эта мысль пришла в голову через 2е секунды🤣
Mesmo que tire o parafuso o ferro não passa pelo cadeado!
Got u on camera,expect a call
В закрытом состоянии к винтам не подобраться , но с права есть доступ , устраняется более длинным ригелем но уже после прикручивания , но уж лучше на сварку и к стальным дверям
😁Кутаклар, а ну не портите людям настроение. Это надежный замок и открутив ручку ригель не вытащить🤭
I love it!!! Perfect for pretty much everything outside and in for me.. thank you for your video...
Excelente amigo .justo lo q necesitaba , con piezas q te sobran en casa ..un excelente pasador..muchas gracias por compartir
This isn't a bad project at all,particularly for a small contractor and/or do it yourselfer with outside storage sheds or buildings,that probably already have items like this laying around,I know I do.The only weak point here is easily excess ability to the hardware hold it in place,,,and that's easily solved + a good primer/paint or cold galvanized spray to prevent rust.
There are a lot more people that have learned to like and appreciate your posts and widom than those that don't. You were a lot nicer than I would have been. I would have shown her contact information.
Thank you for your contribution to the RV community.
Very nice. Weld the left side closed make more secure. Nice craftsmanship.
Amazing ❤❤❤
Simplesmente top!! Parabens.
If we open the screw on the handle, the shaft will exit from the other side. 😉
Точно
Это гениально,Ватсон!)))
Parabéns gostei prático e muito fácil de fazer.
Fantástico trabajo, buen vídeo 👌👍👍💯👋👋👋
Perfecto todos los vídeos que he visto felicitaciones a todos los que asen tantas maravillas buen día saludos.
Все замки для честных людей, а от ни честных ничего не спрячешь, ни за какими замками
Buena idea. sencillo y practico.
WOW SÜPER
Clipper Screw can screw driver open it.
What's the cost of that drill! Want it badly.
Great idea and video. Thanks.
...я у себя в гараже такой-же ригель сделал из внутренней стороны калитки, только из круглой трубы
Quedo brutal y se ve bien segura
Арматуру можно вынуть, открутив ручку! Стоит заварить переднюю часть, тогда норм!
El cerrojo no está mal ideado y es decorativo pero tiene un fallo, llevas un destornillador desatornillas el pivote que va enroscado a la varilla y sale la varilla por el lado opuesto al candado.
Habría que idear un sistema para súperar ese fallo. Un saludo
손잡이의 나사를 풀면 어떻게 될까요?
Идея не плохая если доработать, супер.
E ferrolho de qualidade viu muito bom
Great idea
Muito boa criatividade
nice project but no need for the lock. You can simply unscrew the handle and remove the rebar.
Parabéns pela criatividade , muito bom o projeto, gostei 👍
Bom dia muito bom mais para maís segurança o cadeado tem que atravessar o vergalhão porque se destorcer o trinques o ferrolho quê é rosqueado o trinques saí pra frente muito boa essa ideia e fácil de fabrica tá valendo
Brilliant idea.
Chốt cửa đơn giản đẹp
As a lock, it's useless. They can unscrew the bolt with a screwdriver and slided to the left and the lock is undone.
To prevent that left handside receiving squre bar needs to be a bit longer and a lid welded on the left hand side so if they take the screw out they can't slide the lock bar out..... :)
ఎక్సలెంట్ బ్రదర్.. అద్భుతం
Всё гениальное просто.
Why lock it? Undo the screw on handle and push it left..... whala it open
That’s exactly what I was thinking. He should put a plate all the way to the left and weld it on so that way the rebar won’t come out if they unscrew the handle
@@aaarod75 exactly
@@Bonanza06c At first I was thinking well he should weld the screw onto the rebar but it’s kind of impossible because there’s not enough room to weld. So that is about the only thing he can do the world a piece of plate to close off that little pocket the rebar slides into
انت معلم واحنا منك نتعلم
Muito bom mas se o trinco tivesse sido feito com ferro liso seria melhor pra abrir
Genial 👍🏻👊🏻💪🏻🍾
Unfortunately rebar is such a low grade steel that it can be scored with a razor knife and with a lite tap will break in a clean cut......
Прикольно будет открывать зимой после оттепели или мокрого снега.
Buenísimo 👌👌👍👍👏🏾👏🏾👏🏾
Nice! Good idea
Very good 👍
👍👍👍👍👍👍👍👍very helpful
Ok. Porque no utilizó varilla redonda en lugar de corrugada ???.
Nice job 😊
Super...😜👍🇨🇴
Excelente 👍💯
Ficou chik mas tem que soldar o parafuso senão o cara tira opafuso já era
Measurements please ☺
Good job the only flaw I see in this design is that if somebody figures out that all they have to do is unscrew that little knob that sticks out they can slide the bolt over to the left and pull it up on the left side that’s it. They don’t even have to touch the lock. So the only thing you would have left to do is to weld a little piece of plate on the angle all the way to the left so the bolt won’t come out. And when I mean Boat I mean Rebar
Cute for a shed you want to keep the kids out of!🤣
@@jinglingbabygarage7030 Yeah true
уйццуАа%авнвав вавв4ва2аавувы8
pero si aflojan el tornillo con un simple destornillador, ya la varilla correría libremente 🤷♂️
Well done. Only as strong as the screws and cheap lock though.
Legal só Faltou usar o IPI né
Está muy bueno
That is for honest people… one kick and it’s broken and no picking of lock needed
Sieht schön aus aber beim genauen betrachten nicht sicher
Więcej kosztował czas materiał i robota niż nowa zasuwa w sklepie
Great idea for videos👍👍👍
Boa tarde, muito da hora mesmo, mas deixaria o puxador para baixo, isso é só uma sugestão, mas parabéns ficou muito louco.
Il faut vissé sous le fer ron les visses sont aparentes avec un tournevis ont.. peut dévisser
Nice idea perfect
No me parece seguro para poner asia la calle por quéde puede sacar los tornillos que lo sujeta y aparte lo sacas el perno y se podría abrir, mas bien se usaría para uso interno de la casa como serrojo talvez
bom porém frágil demais. o cadeado fica bem exposto pra possível violação.
Que hacer con las cáscaras de naranja
Такая мощная щеколда!!!!! А шурупчики то гавнецо! Пинком дверь можно вынести!)))
Awesome
No es segura. Si le sueltan el tornillo que corre , sale la clavija del lado que no tiene el tornillo
Ypu know how think you can make that rebar so that an elephant won't even be able to knock it down one at the top and one at the bottom
Hay quá
ใช้ค้อนขัดก้ออกแล้ว
In snow and ice it will not move.
болт с ручки выкрутил и щеколду в другую сторону вытянул))) заглушку нужно. а так прикольно!
тоже также подумал
Между ручкой и винтом надо установить пружинку, будет дополнительная фиксация.
@@vladimirvasin8952 вот эту пружину 4:35
Thank you good idia
„Ohh… I forgot the key, do you have a screwdriver?”
This is from inside!
Some of the tools,solve this puzzle.
И заместо замка можно было всунуть атвёртку или загнутый гвоздь
Very good 👍👍👍
Oh dear! With modifications to prevent people removing the rebar to the left, this design _might_ be ok for holding a shed door shut, but really, just buy a decent bolt! Of course that doesn't get UA-cam views, does it!
That was my thought exactly. It is strong and all but need to at least weld a stop on the piece the rebar goes into so it can't be easily removed. I've seen a few of these home made locking latches and each one while everyone is praising it, using common sense I'm picking them apart. So easy to break. I don't steal and can't stand a thief so nothing there would keep me out but to build a lock you must think like the people who's trying to break in and steal. Granted most thieves are dumbasses but still.
Who needs a key when you've got a Phillips screwdriver
8😊
I do not even need a key just screw driver than I'm in😂😂
King Charles you guys must be jealous because you don't have the ability to think for yourself and make diy things. You probably take your $ and buy some cheap thing made in China.
Bagus sir lock pintunya 👍🤝 indonesia 🇮🇩
Gênio
Quá hay
Откручивай ручку и вытаскивай в другую сторону
Тамаша!
Top
Опасная вариант. С одним ударом или тольчком можно открыть
Hello, I also want a cipher lock, what price does it cost? thank you very much for your understandin
Что мешает выкрутить ручку, и вытащить арматуру с другой стороны
ถอด น็อต ตัวดึงกลอนออก ก็ดึงเหล็กออก ก็เข้า ได้แล้ว 555
I can unlock that by removing the screw
🙏👌👌👌👌👌👌
👍😁
🔥👍🤗
Чтоб открыть этот замок нужна одна отвёртка и все
-Pick locking lawyer breathes heavily
Super!!!
Чёрный металл надо красить плюс петля слабая надавил плечем и все
👍