Just watched you race literally twenty mins ago the 2022 Americans you got into it with the other Ryan then I find this video, brilliant racer, great advice
Ryan thank you so much for all these videos!!! Keep up the good work. Good luck at DNC next weekend. Does the track grip matter as far as brake bias as well? Will you have more towards the read if it low grip allowing the rear to kick out faster on 180° turns? Clutch shoes, clutch bell and spur next...*hint hint* LOL Thank you again!
Hi Ryan, may i ask on the Agama A215T do you use throttle tube on the brake linkage? or springs? or something else do you have any advice on this. Also i notice air filter does not mount to anything have you made a bracket or what should i do with this? Running the Alpha Dragon motor and enjoying it, just fine tuning Truggy. I really enjoy watching your videos and have learnt so much and put it into practise and Truck is so much more precise. Thank you for help 👍
LMR Brake Balls work well in the Brake application. Regarding the air filter as long as it's a reasonably supported one I don't do much with it. Just be sure to use a zip tie where it attaches to the carb. Enjoy!
You put out awesome videos thanks. Any videos on electric brake setup. I gave up on nitro found the learning curve very hard. I was faster with my nitro buggy then my ebuggy but had to give it up. Cheers maybe a driving video on how to brake? And brake setup? Cheers
Hey Ryan, what servo tray are you using? I just got an a319 and the stock battery holder is just the weirdest dimensions I've ever seen and not many batteries fit it
hey ryan, i know that this question is not really releated to de video, but, i'm running a cheap ass engine to practice and not waste my good one, that engine kinda lacks on top end.will i damage someting if i remove compleetly the venturi and run widouth it?of course i will rich it up
Dark godz you can run without Venturi no problem. Just tune it properly for that scenario. If you have enough bottom end torque perhaps drop spur gear 1 tooth if you have.
![How to R/C car tear down into clips for maintenance [Beginner Tutorial with Ryan Lutz of LutzRC]](http://i.ytimg.com/vi/44uidU2t7t4/mqdefault.jpg)
![How to R/C car tear down into clips for maintenance [Beginner Tutorial with Ryan Lutz of LutzRC]](/img/tr.png)
![How to Shim RC Car Gear Diff Differential [Beginner Tutorial with Ryan Lutz of LutzRC]](/img/n.gif)
Just watched you race literally twenty mins ago the 2022 Americans you got into it with the other Ryan then I find this video, brilliant racer, great advice
This was a very helpful video, thanks Ryan 👍🏁
-Rob
Great info! Thanks for putting this vid out!
Super helpful - as a new racer, I am constantly getting confused about setting brake bias and it shows once I get on track.
Ryan thank you so much for all these videos!!! Keep up the good work. Good luck at DNC next weekend.
Does the track grip matter as far as brake bias as well? Will you have more towards the read if it low grip allowing the rear to kick out faster on 180° turns?
Clutch shoes, clutch bell and spur next...*hint hint* LOL Thank you again!
Great video man, thanks
Thanks for the comment! You're welcome!
Hi, Ryan
You get the code for the tool that measures brake force.
Can you post a video or photo showing the tool
please talk about that new futaba servos, the spec look really sick
Good tips if I still ran nitro, I run nothing but electric now, but nitro was fun, still thinking about getting another one.
Electric is fun. But there is just something special about Nitro! :-)
@@RyanLutz tru
Awesome video... Waiting for ebuggy video on how u setup ur ebuggy
Hi Ryan, may i ask on the Agama A215T do you use throttle tube on the brake linkage? or springs? or something else do you have any advice on this.
Also i notice air filter does not mount to anything have you made a bracket or what should i do with this?
Running the Alpha Dragon motor and enjoying it, just fine tuning Truggy.
I really enjoy watching your videos and have learnt so much and put it into practise and Truck is so much more precise.
Thank you for help 👍
LMR Brake Balls work well in the Brake application.
Regarding the air filter as long as it's a reasonably supported one I don't do much with it. Just be sure to use a zip tie where it attaches to the carb.
Enjoy!
Awesome keep up the videos!
You put out awesome videos thanks. Any videos on electric brake setup. I gave up on nitro found the learning curve very hard. I was faster with my nitro buggy then my ebuggy but had to give it up. Cheers maybe a driving video on how to brake? And brake setup? Cheers
Thanks alot 👍😎🏆
Hey Ryan, what servo tray are you using? I just got an a319 and the stock battery holder is just the weirdest dimensions I've ever seen and not many batteries fit it
FreezeCtrl stock. I use the Bullitt 3300 Lion battery. Nemo USA will have in stock Monday.
How do I rotate the ball that is connected to my carburetor by the low-end needle? I need to change its position to match my throttle linkage.
There should be a setscrew opposite the ball that you loosen and can turn it. Be sure to loctite that setscrew when you reinstall.
@@RyanLutz thanks super star
Hi Ryan please could you tell me which brake disc you are using in your car that is in this video? of the A319?
Of the A319 potentially.
hello what is that nut on the cordless screwdriver? Thank you
It is a brake force measurement tool. I actually don’t know if they still make them or not.
Hello,Did you remove the 7px high point spring? Thank you
I did not. But I personally set my throttle endpoint to NOT pull through that little spring.
@@RyanLutz Thank you
Where Cam I get a brake bias tool?
They don't make them anymore. Would have to find a used one from someone.
What is the brake bias tool please?
Was made by Buku.
No longer made I believe.
Thank you@@RyanLutz
hey ryan, i know that this question is not really releated to de video, but, i'm running a cheap ass engine to practice and not waste my good one, that engine kinda lacks on top end.will i damage someting if i remove compleetly the venturi and run widouth it?of course i will rich it up
Dark godz you can run without Venturi no problem. Just tune it properly for that scenario.
If you have enough bottom end torque perhaps drop spur gear 1 tooth if you have.
@@RyanLutz thanks a lot ryan, really enjoyng your videos and your support.
Love from italy
I keep a rubber band on the front of my radio. So it will hold the break on so I don't have to hold it with my finger. I learned that from Adam drake