Did no one catch the hilarious accidental dad joke from Brent at the 8:16 min mark while installing the lettuce spin drier? "Years of experience, have lettuce to this!"
Love the light heartedness of this. Just fun. Definitely put the real deal in that dispenser though. Them dollar tree ropes can't hang.... No pun intended.
I wish my daughter (almost 19) would spend time in the garage more. Do not take these moments for granted, they will be the ones you see when the time comes to move on from here. God bless.
These are the things that keep busy people sane. I remember spending 3 days trying to wire in a rediculously loud siren as a horn. For the first time I use it for a police officer to be on the junction 🤣🤣
I’ve been craving some PFI Speed content and bam here it is! I’ve got to say I’m super excited to hear this thing just thumping the concrete!!!! I love all the projects that PFI have in the stable and this one is right up there with the others!
A lot of old cars with the push pole headlight knob you just turn the knob and it clicks backwards and the light should turn on it also controls your gauges dimmer
Damn, Someone else knows how to turn on the dome light! I am impressed! I can't believe Brent doesn't remember how those old headlight switches worked! LMAO, they pull for lights on, push lights off, turn left to dim instrument lights, right to bright, and then a little more and it will click to the Dome light on position. some had lights in the kick panels that lit up too!. Damn, I am getting OLD! Hey, I wonder if any of them know how to turn on the HIGH Beams? Lmfao, Man, I love these guys, they are all Awesome guys ( and Gals to the ladies) Keep it RAD Brent! BTW hi/lo switch is on the floor. That funny-looking little round thing to the left side of the brake pedal close to kick panel. one day I will make arrangements to drive from Spokane, Wa. down to meet you guys and catch a race too!
y'all need to rig up a little Controller when you pull the spinner it says " its PARTY TIME " hahah! that would be the most epic addition to the red vines dispenser! it was such an absolute pleasure watching Brent And Heidi's Inner Kids come out during this little science project! i Highly doubt this whole car would of never been truly completed if this addition never got added to the car! THIS IS AWESOME!!! ahah can't wait to see you burning all the rubber on this bad lil Pacer brent! going to be one of the coolest Burnie machines in the Burnout Rivals class! are you going to leave the exterior as is or come up with a wicked wrap to go on it!? side note hehe i absolutely love Heidi! she's adorable, and is an ABSOLUTE SNIPER behind the Camera Lense!!! to bad she's taken haha would come all the way out to Colorado to take her for a classic date ( the racetrack and a Freedom Special from the FF Bar and grill ) haha
Damn, Someone else knows how to turn on the dome light! I am impressed! I can't believe Brent doesn't remember how those old headlight switches worked! LMAO, they pull for lights on turn left to dim right to bright and then a little more and it will click to the Dome light on position. some had lights in the kick panels that lit up too!. Damn, I am getting OLD! Hey, I wonder if any of them know how to turn on the HIGH Beams? Lmao, They are all Awesome guys ( and Gals to the ladies), I hope they see your comment!
Twizzlers' origins can be traced to New York's Young & Smylie confectionary firm in 1845, which was bought by Hershey Foods in 1977. The Classic Raspberry Vines (Red Vines' original moniker) made their debut six years later.
I make drillls, get ya a 118 degree point, slower rpm on the drill rotation. Also, its just plastic, give some heat to the drill, hit the send trigger, it'll ease on through. As for cutting the plastic, a heat gun to make the thing pliable is a good bet, oscilating multitools and a grout cleaning attachment will give control over the rate of cutting while also preventing the plastic from going full send. And I just saw greatness happen. A dang ol salad spinner upside down for a red vine dispenser! Garage update, Friday's coming tomorrow, im bout to have a similar level of rowdiness. I think my old 18v drill motor will make a assault red vine dispenser. Maybe I'll make it motion activated. So the friends come on by, then red comes to the dome decide who is worthy to receive work snax. Dudes/dudettes, thats a killer plan. I'm about it.
Hook the wires back up like factory and when you want to light it up just turn the headlight knob all the way to the left and the interior lights will pop on
I am pretty sure they sold those dispensers that were identical to the ones in the movie but 🤷♂️ looks pretty damn good to me. This is why everyone loves you guys🇺🇲
Brent ……. You getting distracted wit missy 😉🤣🤣🤣🤣🤣🤣 , get the 40’ rope of it change it to a clear jello cake mold using some left over parts and the original had a little razor on a swivel to cut the rope. You got this. Ps Keep her around
You know what’s better than candy… NOTHING! This Pacer is sooo Totes Rad!
ur soooo rad and cute to miss heidi 💪🙏🤙💯🧡💛💚🙃
U guys should of used a screw on lid tuber wear bawl an cut an 1 x 1 inch hole in it. Than screw the tuber wrear lid to the roof
@@stephenstenger3498 Are you drunk?
with all due respect to Sean, Heidi is a great upgrade in the fabrication department. 🙂
She's fab-ulous
@@BennyTygohome zing! 😂
Amen🤣
Apples and oranges....
Thats definitely the best comment.....Heidi is just really an eye candy 🍬 😄 🥰😍 #pfispeed #Heidi
Did no one catch the hilarious accidental dad joke from Brent at the 8:16 min mark while installing the lettuce spin drier? "Years of experience, have lettuce to this!"
Hey you gotta lettuce have a laugh anytime possible !!!😂😂😂
I don't think it was accidental.. pretty sure Brent knew what he said.. made me LOL
Petition to make Heidi officially a part of PFI
Shwing! My god she is a looker.
Heidi and Brittany looking great as well ;)
Heidi is awesome.Good to see her help out on the Pacer.
Heidi adds a nice touch to the channel !!
"years of experience lettuce to this" that was such a subtle pun!
That's so awesome. It w great seeing Heidi joining the build.
what a video, never thought i'd watch a 15 minute salad spinner install, what a video guys! 11/10 Heidi is so cool
Love the light heartedness of this. Just fun. Definitely put the real deal in that dispenser though. Them dollar tree ropes can't hang.... No pun intended.
I wish my daughter (almost 19) would spend time in the garage more. Do not take these moments for granted, they will be the ones you see when the time comes to move on from here. God bless.
I'm so happy that you guys spent basically a full day on this extremely important upgrade.
These are the things that keep busy people sane.
I remember spending 3 days trying to wire in a rediculously loud siren as a horn. For the first time I use it for a police officer to be on the junction 🤣🤣
Absolutely loved this Brent.. PARTY TIME EXCELLENT! LOL, cant wait to see the pacer running down the drag strip!
I’ve been craving some PFI Speed content and bam here it is! I’ve got to say I’m super excited to hear this thing just thumping the concrete!!!! I love all the projects that PFI have in the stable and this one is right up there with the others!
A lot of old cars with the push pole headlight knob you just turn the knob and it clicks backwards and the light should turn on it also controls your gauges dimmer
Damn, Someone else knows how to turn on the dome light! I am impressed! I can't believe Brent doesn't remember how those old headlight switches worked! LMAO, they pull for lights on, push lights off, turn left to dim instrument lights, right to bright, and then a little more and it will click to the Dome light on position. some had lights in the kick panels that lit up too!. Damn, I am getting OLD! Hey, I wonder if any of them know how to turn on the HIGH Beams? Lmfao, Man, I love these guys, they are all Awesome guys ( and Gals to the ladies) Keep it RAD Brent! BTW hi/lo switch is on the floor. That funny-looking little round thing to the left side of the brake pedal close to kick panel. one day I will make arrangements to drive from Spokane, Wa. down to meet you guys and catch a race too!
Love the Heidi content! She’s awesome!
Who is she?
Photographer in Motorsports.
@iaen valley i bet you get all the ladies with that comparing them to meat line
Between Wayne, Garth, and Heidi, this is an excellent project
heidi is tia carrere's character...
You got to get the 50 foot red rope!
Got to get type 2 diabetes!
Yeah gotta have the super rope for full affect. None of that pre cut stuff.
Brent,Jamie and Heidi y'all rock! Love the channel and content! I'm here for the algorithm! Peace
This is awesome. I love the car, I can’t wait to see it in person. Wayne’s world party time excellent.
SkidMark needs a sketchy brown stripe up the back in the centre
🤣😂🤣😂
No dragging here, this build is on pace. Lets go!
But I'm a little confused why they aren't putting their time and effort into finishing shonuff?
@@peteuncle2935 Because the pacer is due up for cleetus burnouts in April.
Dang looks like Jamie got a fresh grill!!! You go brother!!!
Bruh that’s nuttin but a big ole dip in his mouth.
@@jhager214 you might wanna go either watch again, or clean your 🕶️, there's some fresh pearly whites
@@briansims3048 he has dip in his mouth.
@Bigg Gee yes he has dip in his mouth. But he did just get all new teeth a few weeks back.
“Years of experience have lettuce to this”. I see what you did there! 😂😂😂
Omg lol you guys have great ideas awesome you took time to do that super cool
Probably the best episode ever
Man you could use the soldiering iron for the holes. What good fun
That was a lot of fun to watch, nice to see everyone just doing dumb things just because and nice to see Heidi helping 👍
y'all need to rig up a little Controller when you pull the spinner it says " its PARTY TIME " hahah! that would be the most epic addition to the red vines dispenser! it was such an absolute pleasure watching Brent And Heidi's Inner Kids come out during this little science project! i Highly doubt this whole car would of never been truly completed if this addition never got added to the car! THIS IS AWESOME!!!
ahah can't wait to see you burning all the rubber on this bad lil Pacer brent! going to be one of the coolest Burnie machines in the Burnout Rivals class! are you going to leave the exterior as is or come up with a wicked wrap to go on it!?
side note hehe
i absolutely love Heidi! she's adorable, and is an ABSOLUTE SNIPER behind the Camera Lense!!! to bad she's taken haha would come all the way out to Colorado to take her for a classic date ( the racetrack and a Freedom Special from the FF Bar and grill ) haha
Ugh Heidi is such a hotty! Love what you guys are doing as always Brent ❤️❤️ Can't wait for yall to move to Florida someday 🤞🤞🤞
Id smash that like button lmao
Loving the fact you’re doing it to Wayne’s world style! Party on
Does it have a pull light switch for the head light? If so, twist it till it clicks in one direction. That should make the doom light work.
Damn, Someone else knows how to turn on the dome light! I am impressed! I can't believe Brent doesn't remember how those old headlight switches worked! LMAO, they pull for lights on turn left to dim right to bright and then a little more and it will click to the Dome light on position. some had lights in the kick panels that lit up too!. Damn, I am getting OLD! Hey, I wonder if any of them know how to turn on the HIGH Beams? Lmao, They are all Awesome guys ( and Gals to the ladies), I hope they see your comment!
Just like an old ford
Yep, my old 79 Lincoln had this
Never thought I’d enjoy watching a candy dispenser video on a car UA-cam channel, Brent keeping it fresh!
Little mirrors glued on the upper part of the rotor, and disco is done !
The best 15:38 of my life. Can't wait to see what you come up with next👍
Twizzlers' origins can be traced to New York's Young & Smylie confectionary firm in 1845, which was bought by Hershey Foods in 1977. The Classic Raspberry Vines (Red Vines' original moniker) made their debut six years later.
I make drillls, get ya a 118 degree point, slower rpm on the drill rotation. Also, its just plastic, give some heat to the drill, hit the send trigger, it'll ease on through.
As for cutting the plastic, a heat gun to make the thing pliable is a good bet, oscilating multitools and a grout cleaning attachment will give control over the rate of cutting while also preventing the plastic from going full send.
And I just saw greatness happen. A dang ol salad spinner upside down for a red vine dispenser!
Garage update, Friday's coming tomorrow, im bout to have a similar level of rowdiness. I think my old 18v drill motor will make a assault red vine dispenser.
Maybe I'll make it motion activated. So the friends come on by, then red comes to the dome decide who is worthy to receive work snax.
Dudes/dudettes, thats a killer plan. I'm about it.
Wow, they installed the nee HEI-DI system in the skid mark, lookin good. 😉
Nice
You have to hook up the the door switch to a flasher can👍
Time to smoke a fatty and watch one of my most favorite channels! Beautiful timing guys. Thanks!
The trick is to keep smoking, then pfi is always on time!
Hook the wires back up like factory and when you want to light it up just turn the headlight knob all the way to the left and the interior lights will pop on
"Years of experience have lettuce to this." Is that a salad spinner joke?
It just keeps getting better and better! 🤙🤙
Heidi is just so beautiful 😍 ❤
im mesmerized
Wayne tested! Garth approved! PARTY ON! 🎸🎶🎶🎶🎶🎶PARTY TIME EXCELLENT!
The car looks awesome Brent.
I see you got an official " Cat Scan" of the project. Then it stayed on top of it after it was done
"""The red vines dispenser coming in clutch"""
- PFI Speed
Why does this seem like something they would do on Pimp My Ride back in the day?
because they did it with gumballs lol
Yo Dawg...
(Obligatory)
The only reason the wire was that far back was so the domelight turns when the hatch is opened too.Glad it's turning out well.
Great addition
Revolutionary....because it spins! Ultimate pun!
I am pretty sure they sold those dispensers that were identical to the ones in the movie but 🤷♂️ looks pretty damn good to me. This is why everyone loves you guys🇺🇲
Heidi is so HOT! Her attitude, her love for cars, and her smile! 😍😍😍
Love the progress on this machine!
Thanks for sharing!
Freakin PFI Speed the level of engineering knows no bounds!
Where do I find myself a Heidi ? Awesome and mega 🔥 has to be said 😉
Heidi getting them guts crushed 😄
The pacers and the other models were supposed to have rotory motors but it fell thru n ended up with the 258 straight 6 from the jeeps
Look at her, wow
Yeah, that's a clean Pacer.
@@mikescherrer4923 right!
That’s to funny! I can’t wait to see it rip!
I'm certain Brent has been tuning Heidi's ECU. The way they interact says they are more than JUST friends.
I believe she’s married with Children.
The Tuning might be secret.
Try turning the headlight switch to the right all the way, should turn the dome light on.
to the left actually
to the right dims the dash lights
@@subhumann it's been a while. Lol
@@timoy4988 it's all good. I'd probably forget too but my daily is a 1970 Suburban. 😀
@@subhumann nice! Love those, barn doors? I roll a 95 xj with a 6.5 long arm. Great for west Denver. Plenty of fun to be had!
Not gonna lie, thought being in Colorado you all opened a happy day's smokey outlet. Lmao 🤣🤣🤣 but this was so much better!!❤❤❤
Now it's complete,😺👽👍 totally tubular, ggz
Excellent!
Brent ……. You getting distracted wit missy 😉🤣🤣🤣🤣🤣🤣 , get the 40’ rope of it change it to a clear jello cake mold using some left over parts and the original had a little razor on a swivel to cut the rope. You got this. Ps Keep her around
I'm putting a 351w stroked to a 420 I'm the same thing... It's a 671 blower is motor as well..... Should've fun
Nice job guys!!!
For the dome light you turn the headlight switch to rotate the knob
Creativity at its finest 💯👊🏼🍻🖤
Party on Brent…. Party on Jamie….
WOW, that was something, NICE!
Party time excellent
Now you need the cup dispenser in the dash.
And the can dispenser/crusher.
Hell yeah nice work guys
I so freaking need one of these!
She kinda looks like cosandra. Lol "And her name was cosandra." What a classic
Don’t forget the cup dispenser in the dash.
High speed. Low pressure. Let the drill do the work.
We all have faith in momma pfi
😆 🤣 its all in the little details lol
That little beastie is looking really good. It's going to be one hulluva burnout car.
Awesome! On this episode of pimp my ride...
You have to stick some tiny mirrors to the basket for disco ball effect.
Finally during your build you would have a video of shenanigans awesome Wayne's World Wayne's World
Heidi for the win. So cute😍
What is up PFI speed keep the great content coming 👍 still watching from Fresno California
What's good tho beautiful weather out here in mighty Fresno 👍
that suspension geometry is interesting. wonder why they made it like that. ( the angle is "toed in" or the upper ctrl arms)
also : Proof of Concept : done!
hopefully redvines will want to jump in and sponsor this build
PFI TEAM ingenuity at its finest. J swap Jason.
Twist the headlight knob to the left for the dome light.
Omg. She's beautiful. And she
put up with this?
Been watching y'all since boosted Boyz was there love the videos Brent ur a whiz on the tunning my guy
just made dinner, perfect timing!
Lol same here love watching while I grub out!
twist the head knob to right makes the spam lights come on and the u found in the back goes to the cargo light in the back party on Garth
Nice build👍
Lots of Heidi in recent videos... Is she... attached to the crew ?
Not complaining at all!
Busy day at the office 🤣
Just twist the headlight switch it should snap on the dome light
That cat owns the shop now boys. Sorry to break the bad news lol