Restoration old D6 diesel engine | Restore and repair old D6 diesel engine

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • Restoration old D6 diesel engine | Restore and repair old D6 diesel engine
    Diesel engines, also known as combustion engines or CI engines, are named after Rudolf Diesel. The diesel engine is an internal combustion engine, in which fuel ignition is caused by the high temperature of the air in the cylinder due to mechanical compression.
    I hope you find something useful from this video!
    I am happy to receive your feedbacks, advices, suggestions to improve myself better
    !!! I apologize for the mistake if I have made in this restoration !!!Thank you for watching the video. Don't forget to like and subscribe to channels
    Link subscriber
    / restorationittool
    Link facebook
    www.facebook.c....
    Link twitter
    / mrthao18
    #restoration #restore #repair

КОМЕНТАРІ • 276

  • @tasfiablogs2.0
    @tasfiablogs2.0 2 роки тому +4

    Super video

  • @ikechukwuemmanuel7147
    @ikechukwuemmanuel7147 3 роки тому +2

    How can i get this puller

  • @নীলকন্ঠ-ণ৮ঘ
    @নীলকন্ঠ-ণ৮ঘ 3 роки тому +2

    পার্টসের নাম সহ দিলে ভালো হয়

  • @S_t_E1
    @S_t_E1 3 роки тому +2

    Это не восстановление агрегата. Вы хотя-бы ради прикола измерительные приборы достали... Обычный чес. Не используется данамометрический ключ для оптяжки головки. Клапана не притерты... Можно продолжать без конечно.

  • @AMAkash-gx6lc
    @AMAkash-gx6lc 3 роки тому +2

    Love for you

  • @moestrei
    @moestrei 3 роки тому +2

    That motor looked heavier than the moped it was transported on.

  • @СергейПономаренко-с1ы

    Дерьмо а не реставрация-просто разобрали,покрасили,собрали....Не поменяли ни сальники,ни подшипники,ни кольца на поршне...Такую реставрацию любой пацан деревенский сделает...

  • @kerimdogan7439
    @kerimdogan7439 3 роки тому +1

    why didn't use mask tape for screw hole and mechanic surface

  • @MuthuRaj-yy2ss
    @MuthuRaj-yy2ss 3 роки тому +1

    Nice super..🇮🇳

  • @aidrianbrunili6106
    @aidrianbrunili6106 3 роки тому +2

    Nice bro watching from Philippines

  • @changesandchallenges2243
    @changesandchallenges2243 3 роки тому +2

    Sao không rửa sạch trước khi tháo
    Máy này D7 chứ 6 gì

  • @lovelyyoutube8568
    @lovelyyoutube8568 3 роки тому +1

    Chakka nahi ghurta h uska karan

  • @mdsazzadulsazzadulislam8212
    @mdsazzadulsazzadulislam8212 3 роки тому +2

    Nice

  • @lhsanafandi5442
    @lhsanafandi5442 3 роки тому +2

    This of diesel which same with
    of diesel D4.

  • @МихаилРоманов-ш1н
    @МихаилРоманов-ш1н 3 роки тому +7

    Видео полная фигня! Собрал всё на старых подшипниках, сальниках и поршневых кольцах! Мойка запчастей кисточкой это НЕ РЕСТАВРАЦИЯ!

  • @fishing.farmer
    @fishing.farmer 3 роки тому +2

    Good👍👍👍👍👍

  • @AJRestoration
    @AJRestoration 3 роки тому +4

    Invest in proper tools, and MASKING TAPE! Overspray on EVERYTHING!

    • @aterack833
      @aterack833 3 роки тому

      Close enough to factory for some of these things actually, but ya, that was cringe worthy to watch

  • @nabadiproy4666
    @nabadiproy4666 3 роки тому +1

    Original colors must be paint. For looking nice

  • @shivamkumarsatya543
    @shivamkumarsatya543 2 роки тому +2

    Video ke sath _sath aapki awaj bhi aani chahiye video bahut good banate ho

  • @bsputrachanel8283
    @bsputrachanel8283 3 роки тому +5

    ternyata hanya gua orang indo yang nonton ini

  • @canhnghi7878
    @canhnghi7878 3 роки тому +1

    Cái này là máy sục khí tạo oxi cho tôm cá thườg trên xe tải hay gắn phải ko

  • @RanjeetKumar-jp6dh
    @RanjeetKumar-jp6dh 2 роки тому +2

    Hame kam bajat me purana enjan chahiye

  • @linnhtetaung5728
    @linnhtetaung5728 3 роки тому +1

    Please restore and repair old 12/13 hp Jinma diesel engine.

  • @ianportter1257
    @ianportter1257 2 роки тому +3

    mi infinita admiracion...

  • @MOTOBUY-mg3kq
    @MOTOBUY-mg3kq 3 роки тому +2

    good very much

  • @agape798
    @agape798 3 роки тому +3

    Mantap

  • @jairusjithu9608
    @jairusjithu9608 3 роки тому +4

    Head bolt and con rod bolt not tighten by torque wrench,and didn't show the valve clearance

    • @spannerman2887
      @spannerman2887 3 роки тому +1

      Didn’t see any lube on the bearing either,but respect overall for what was achieved.

    • @cdias3272
      @cdias3272 3 роки тому +1

      Bro its an old diesel engine its not a spaceship

  • @kudduskhan1606
    @kudduskhan1606 3 роки тому +2

    Supar

  • @chinlee7059
    @chinlee7059 3 роки тому +2

    Sao a toàn đặt đồ cổ trong thùng gỗ hoành tráng z 😆😆

  • @rosasalvadorinocente5943
    @rosasalvadorinocente5943 2 роки тому +1

    Hola desde Perú me gustaria .monificar en mi bajas porque este motor torotra tiene fuerza andaría x todo ceros

  • @СергейМазняк-п9ч
    @СергейМазняк-п9ч 3 роки тому +14

    Даже сальник покрашеный остался!!!🤣🤣🤣

  • @mukeshgupta6870
    @mukeshgupta6870 3 роки тому +3

    Nice

  • @sergioseus
    @sergioseus 3 роки тому +1

    O termo correto é limpeza e pintura , não restauração ! Não tocaram os rolamentos, não trocaram pistão, anéis ,camisa, elemento de bomba e bico injetor , não trocaram nem as juntas !!

  • @robertobezerra8376
    @robertobezerra8376 3 роки тому +2

    Show.

  • @ต้นน้ํา-จ9ว
    @ต้นน้ํา-จ9ว 3 роки тому +2

    Good

  • @ifannuy
    @ifannuy 3 роки тому +2

    Nice👍👍👍👍👍

  • @diversenature7705
    @diversenature7705 3 роки тому +1

    How much engine oil does it need? Please reply to me, sir.

  • @phucnguyentv4103
    @phucnguyentv4103 11 місяців тому +1

    Ráp sai zoog wilad không đúng lổ nhớt nuôi supap

  • @николайносов-э1п
    @николайносов-э1п 3 роки тому +6

    по сути это не реставрация а обычная мойка и покраска.

  • @abderrahimhaddanitankioupr9367

    THANKIOU

  • @dietkieu189
    @dietkieu189 3 роки тому +2

    Việt Nam. Good

  • @digranni128
    @digranni128 3 роки тому +3

    Mas vc não retificou só limpou e montou de volta

  • @duongtang5285
    @duongtang5285 3 роки тому +2

    Chuẩn chất của Việt Nam ! Dòng máy nổ diesel huyền thoại do trung quốc thiết kế cà sản xuất.

  • @NURHAKIMI-be3du
    @NURHAKIMI-be3du 3 роки тому +1

    Curi manalah enjin tu

  • @pappumukhiya3203
    @pappumukhiya3203 3 роки тому +5

    good Job bro ❤️❤️❤️

  • @paulorth2251
    @paulorth2251 3 роки тому +8

    Guys the bottom line is it starts, runs, shuts down and starts again. Great little motor.

  • @alaminhossinnice7986
    @alaminhossinnice7986 3 роки тому +2

    Nice job

  • @aamirshahzad8012
    @aamirshahzad8012 3 роки тому +2

    Nice.👍👍👍👍👍👌👌👌👌👌

  • @quannguyenvlog2260
    @quannguyenvlog2260 3 роки тому +2

    Làm máy xe l66 đi a

  • @დიმაიზორია
    @დიმაიზორია 2 роки тому +1

    👍👍👍👍👍👍

  • @mamun-sardar
    @mamun-sardar Рік тому +1

    Good video

  • @somaiameghla6360
    @somaiameghla6360 3 роки тому +2

    Old disel engine airokom e asa

  • @edap4033
    @edap4033 3 роки тому +1

    Chlapy to neni oprava,to je jen nova barva🤦‍♂️

  • @AbdulRasheed-vk1hg
    @AbdulRasheed-vk1hg 3 роки тому +1

    Powertillar velkan udngel parayuka

  • @mahamudulkobir4030
    @mahamudulkobir4030 3 роки тому +1

    Nice to see. Injoy

  • @trangka445
    @trangka445 3 роки тому +1

    làm cho mình clip máy d8 ik bạn

  • @JimNichols
    @JimNichols 3 роки тому +2

    SO........ you painted it and that is all you did.

  • @sitepu4275
    @sitepu4275 3 роки тому +2

    Good🖒🖒🖒🖒

  • @fishingwithfilitsa
    @fishingwithfilitsa 3 роки тому +3

    Great video

  • @nitumanideka136
    @nitumanideka136 3 роки тому +1

    Vai ji last keu stast nehi hua.back keu Mara.

  • @hamop3
    @hamop3 3 роки тому +1

    Very Nice job guys

  • @faxtor987
    @faxtor987 3 роки тому +2

    Đây là kênh người việt nam mà!

  • @mdkobir6362
    @mdkobir6362 2 роки тому +1

    Wow nic 🇧🇩🇧🇩🇧🇩🇧🇩

  • @nguyenmaimai23
    @nguyenmaimai23 3 роки тому +1

    Tưởng thế nào .... ráp lại toàn đồ củ .

  • @janu5797
    @janu5797 3 роки тому +3

    I think u better use sand blaster, but well good job btw

  • @МАСТЕРЖуК-ч8ъ
    @МАСТЕРЖуК-ч8ъ Рік тому +1

    Сколько смотрел такие видео, ни разу не видел, что кто-нибудь ремонтировал такие двигатели, просто помыли и покрасили. Ни подшипники не меняют, ни сальники, ни втулки, я уже про поршневую группу не говорю...

  • @zulkiflyhjali5142
    @zulkiflyhjali5142 3 роки тому +2

    Good job🤗done subscribe

  • @محمدبطران-ش9ص
    @محمدبطران-ش9ص 3 роки тому +2

    Wow👏👏👏👍👍👍💕💕💕✊✊✊

  • @عليابوتراب-ع9غ
    @عليابوتراب-ع9غ 3 роки тому +2

    👏👏👍🌹

  • @md.shohelkhan7193
    @md.shohelkhan7193 3 роки тому +2

    ভাই

  • @naito2756
    @naito2756 3 роки тому +1

    K xả gió dầu.

  • @DarkKiller565
    @DarkKiller565 3 роки тому +1

    реставрация - помыть и продать =/

  • @petertran272
    @petertran272 3 роки тому +1

    Làm lại con này mấy tiền

  • @EngineerMohammed-y7i
    @EngineerMohammed-y7i 3 роки тому +1

    Good job,,,👍

  • @laitpasia
    @laitpasia 3 роки тому +2

    So cool!!

  • @khanhduy9714
    @khanhduy9714 3 роки тому +2

    Này đầu tư Bộ đồ nghề đẹp đấy🤣

  • @markphillips6154
    @markphillips6154 3 роки тому +8

    I’ve never seen a torque wrench on any of the builds of any size.

    • @turner7979
      @turner7979 3 роки тому +3

      Guess they eyeballed the valve clearance. No feeler gauges needed

    • @asrafulalom6588
      @asrafulalom6588 2 роки тому

      @@turner7979 ং

  • @aterack833
    @aterack833 3 роки тому +2

    Pretty good

    • @restoration-restore-repair
      @restoration-restore-repair  3 роки тому +1

      thanks

    • @aterack833
      @aterack833 3 роки тому +1

      @@restoration-restore-repair if it’s not too much trouble, could you show you guys inspecting the seals and where they ride, and the bearings, or show that you replace ones that are in bad shape, I think it would help the quality of the videos and a lot of people seem to not like that you don’t

  • @fardinahmed5562
    @fardinahmed5562 3 роки тому +2

    nice

  • @darploin5071
    @darploin5071 2 роки тому +1

    As much engine restoration as you guys do and might be worth investing in a socket and a wrench that can get that nut off the flywheel

  • @bajar6797
    @bajar6797 3 роки тому +1

    Dipo roi

  • @DaimlerSleeveValve
    @DaimlerSleeveValve 3 роки тому +5

    So, take a working engine, dismantle it without cleaning, to ensure the crap is spread all over the important parts, damage the bearings, give it a slapdash paint job, then reassemble.
    I'd estimate a running life of about two hours after the botch.
    At least this time they used some gaskets which looked appropriate.

    • @moestrei
      @moestrei 3 роки тому +1

      Loved the ol painted crank oil seal.

  • @exclusivesafar
    @exclusivesafar 2 роки тому +1

    Good job

  • @guruguru9018
    @guruguru9018 3 роки тому +2

    Desal engine super re work very nice

  • @chuckswingle1447
    @chuckswingle1447 3 роки тому +1

    I gave it a thumbs up but I would have done it differently. Not much quality put into it.

  • @anibalvelazquez8412
    @anibalvelazquez8412 3 роки тому +2

    Saludos, tengo un motor diésel estasionario tengo una fuga de aceite por arriba por donde será

  • @stevezanatta8878
    @stevezanatta8878 3 роки тому +1

    You need a sidecar for your motorcycle to haul heavy stuff

  • @nguyenle8717
    @nguyenle8717 Рік тому

    Chào bạn máy của mình D6 giồng y chang của bạn luôn nhưng piston bằng của bạn biston lõm chữ C bạn cho mình hỏi piston bằng và lõm chữ C cái nào chạy ổn hơn không

  • @santanumondal9906
    @santanumondal9906 3 роки тому +3

    😍

  • @DOBRYNYA992
    @DOBRYNYA992 3 роки тому +3

    Двигатель от китайского мини-трактора.

    • @PilaLo
      @PilaLo 3 роки тому

      мы сказал это "Тоу ла джи"

  • @lemuelvitor6225
    @lemuelvitor6225 3 роки тому +2

    Parabéns amigo faz mais gostei

  • @hesrey6734
    @hesrey6734 3 роки тому +1

    Mmmm ok
    Well it runs

  • @MohanKolpe-by1hr
    @MohanKolpe-by1hr Рік тому +1

    जयहरी ok

  • @JQ-ti1kz
    @JQ-ti1kz 3 роки тому +1

    Videos made in Vietnam 🇻🇳🇻🇳🇻🇳

  • @rapchanhossainrakib1398
    @rapchanhossainrakib1398 Рік тому +1

    Nice kaj

  • @grandamrickd7306
    @grandamrickd7306 3 роки тому +12

    This is just a clean and assembled. Old seals, old bearings no honing and rings . Didn't restore anything just got it running again. Lol

    • @Originalhaydn
      @Originalhaydn 3 роки тому +2

      Thanks, came just to say that! God, and paint inside the engine.....

    • @leolehepuu2313
      @leolehepuu2313 3 роки тому +1

      @@Originalhaydn just my thought. They should have shown engine not even rotating. They just overpainted and reassambeled the engine. This is not restore video.

    • @moestrei
      @moestrei 3 роки тому

      It started and it did not blow blue smoke.....perfect.

  • @moestrei
    @moestrei 3 роки тому +3

    Wow...restoring an engine by painting it. Silly me always buys all those new parts when rebuilding an engine. Really like this old, robust and easy to work on design.

  • @toanhuynh3848
    @toanhuynh3848 2 роки тому +1

    Vietnamese Hà Nội

  • @charlesteacher3276
    @charlesteacher3276 2 роки тому +1

    Quem viu o motor ligado e o volante parado kkkkkk

  • @احمدالعربي-ط7د
    @احمدالعربي-ط7د 3 роки тому +1

    عمل ممتاز وجيد