Це відео не доступне.
Перепрошуємо.
Evinrude Injector programming for FICHT, DI, & Etec Outboard motors
Вставка
- Опубліковано 23 лип 2021
- A brife tutorial on how to program new and used injectors into your FICHT, Direct Injected, or Etec outboard motors.
The Evinrude diagnostic hardware & software can be found at:
www.powersport...
The QR code scanner app used :
play.google.co...
Thank you for this!! I will be trying this tomorrow!!
Great content brother. Thanks for posting. Info on this particular setup isn't out there much. I happen to be lucky enough to have purchased the software years ago. I will be using this short and to the point tutorial to swap out a bad injector this am
Great Info man.... keep them up
Great video and information. Short, simple, and right to the point. Thank you!
Great information ! Thank you . If you can , create more Evinrude ETEC content.
How do we get the injector number if the injectors dont have qr codes on them?
Nice video ..Lock wery easy . Thanks 😊
thank u for your clip u made it easy to work out i put a new emi and needed to put my injectors in it i hope i can do it ill let u know thanks
Thank you. Very clear!
I have a 30 hp evinrude e teceh marine engine, I start the engine, the engine runs at idle, but the engine lights do not turn off. When I put it into gear, the engine stops.
hi great vid i have a 2000 150 hp ficht what spark plugs are you using and re there going to be any maintenance vids coming
cheers mate
Is this the same procedure and (Diagnostic Kit) for all years of evinrude or just for specific years?
I have that outboard and removed the battery terminals from it. Now I can't work out where the negative goes...can you help?
Not all scanning apps will work for the QR tag to record the injector's coefficient data that must be installed. This App works perfectly but only on ipad: "QR Code Reader + QR Scanner", "QR & Barcode Scanner" by Gamma Play Limited: Designed for iPad.
Then you have to figure out cleaning up / editing the data string.
Not avail on iphone as far as I can find...
The Android Phone version from the same "Gamma Play (or Ray)"
Have You heard the website to get the calibration is down and nobody can get the codes from the manufacturer?
Irrelevant to this process. Coefficients aren't obtained from the manufacturer or any website. The answer to your next question is in the video
it any way you can give me some issue i got on my motor i been working AL week but can't find out my problem
Great video! I don’t see the injector tab in the settings after performing the steps in the options. Any idea why?
Whether it is numberserie injector program? Really simple🤔
My 98 evinrude Ficht 150 keeps spitting gas from the propeller
Hey by any chance is this the same process for etec brp motor ?
By any chance if I find a port injector asking that the injector are port side can I reprogram them for example my number 6 injector showing open circuit detected ect can i use any port side injector like number number 2 or 4 port injector if I find one can I use them too ?
excellent
HI, i´ve got a set of 130 e tec spare inyectors and a 115 with a broken one, will the spare ones work on de 115?
Can this be used to program a used emm to my old emm injector profile?
Just wordering if i can buy a used emm and program my injector profile into it?
What scan too call or software
Nice video, I have a question I bought a 05 etec 90hp and the guy I bought it from says they replaced the emm with a set of injectors to matches and it runs good but it has a bad hesitation at 1800rpm and when it hits 2000 rpm it just jump to 2500rpm and runs good after that and if I do a holeshot it has no problems ,someone mentioned to check injectors to make sure it matches the emm would that be a reason for my problem????
Check for updates ,there was 1 for a hesitant throttle
how do you know which of the six injectors is number 1,2,3,4,5, or 6?
Saya jugaimgim tau😊
Can you program a new emm with this kit?
Hi, thanks for sharing, a great clear example of physical and on screen how to. Does it automatically back up the original data for each injector or is it best to screenshot as a back up? Can it back up any other data? Cheers 👍
Glad it was worthwhile to you!
I can't remember off-hand, I'd have to look at the program, but if my memory serves me correctly I'm pretty sure there is an option to create an existing injector file beforehand
@@puttputtbang5684 can i get the coeficient for my injecteur using serial number
i need help, i'm not able to scan the injector qr code... i tried different apps but nothing works....can someone help me?
tnx
im having the same issue did you figure it out?
Hello, I have the same program and the option to enter a new injector does not appear, did you use the bootrap cable?
No bootstrap
Thanks for the video. I sent my EMM out for repair however it seems to be lost!! I bought a used EMM but it has the wrong MAP firmware. Can I upload MAP's to the engine with this software via the bootstrap tool?? Hate to think my engine is paperweight because my EMM is lost!! Thx
facebook.com/groups/2002844156628796/?ref=share
This group is a great resource for these motors
@@puttputtbang5684 Thanks!
lakeside tech might be able to help. He deals with these electronics on PWC's, but I know he can reprogram the whole emm.
What QR CODE SCANNER Program are you USING IPhone i am using? ALSO is it important to identify which cylinder to input injector information?
can i get the coeficient for my injecteur using serial number
Not all scanning apps will work for the QR tag to record the injector's coefficient data that must be installed. This App works perfectly but only on Ipad: "QR Code Reader + QR Scanner", "QR & Barcode Scanner" by Gamma Play Limited: Designed for iPad.
Then you have to figure out cleaning up / editing the data string.
Not avail on iphone as far as I can find...
The Android Phone version from the same "Gamma Play (or Ray)"
what software is this?
www.powersports-diag.com/en/14-evinrude-diagnostic-kits
Thank you for sharing the software you used to do this no marina or anyone on the internet seems to want to give out that information.
You're welcome