Thanks Kevin...😁🙏 I'm going to do what "Jimbo4203" suggested, and get rid of the spare tire, along with either "A" Relocate the battery to a more central location, or "B" Switch to a much smaller and lighter weight battery, or possibly even both.😄 It also needs high clearance links going to the axles, along with a Overdrive front Ring & Pinion gear set "to help it dig in on the front axle a bit more" After all that, it should be a drastic improvement.😄 If only I had the extra money.😔 Until then, I'll just try getting rid of the spare tire and relocating the battery, and then hopefully it will be a bit better.😄 As for the wheels; Much appreciated..😊 these wheels have been kicking around forever, "and until this truck came along" they just wouldn't work with anything else.😂 Lol
Thanks Doug... Although "to me" I found it to be a bit disappointing, "not the video itself" but the truck. I find myself being disappointed with the Scx10 III, and no matter what I do to it to make it better, it just keeps letting me down.😕 I think the next step with this truck is going to be a Overdrive front Ring & Pinion, and a set of High Clearance links, along with removing the spare tire and relocating the battery & or switching to a smaller battery for less weight. And hopefully "after all that" it will be a little bit better the next time around.😊
Good call Jimbo, I wanted to keep the truck looking somewhat stock, but I agree with ditching the spare tire, that's just excess B.S. weight that doesn't need to be there.😁 As far as the battery location; I've been planning on that since the first run on the rocks, but just haven't done it yet.😁👍 Ultimately I should get rid of the driver figure,and the lead counter weight on the opposite side of the truck too,😂 But I'm not willing to do that just yet.. I think that every RC looks better with a driver figure behind the wheel.😊 Thanks for your great suggestions, and for checking out the video my friend.😁👍👉🏆
@R.C.A.D. I get the driver stuff , just get a little more up front , of course I would put on bigger tires and trim the body some but I just love my Dremel LoL
@jimbo4203 My apologies for the late response Jimbo, I just finished a 5+ hour tour, doing a last minute lawn cleanup over here. But much appreciated for the sub, and I can't thank you enough for the channel compliments.😊👍🤜🤛
It's a good run.The wheels look great👍✨️✨️✨️🇺🇲
Thanks Kevin...😁🙏 I'm going to do what "Jimbo4203" suggested, and get rid of the spare tire, along with either "A" Relocate the battery to a more central location, or "B" Switch to a much smaller and lighter weight battery, or possibly even both.😄
It also needs high clearance links going to the axles, along with a Overdrive front Ring & Pinion gear set "to help it dig in on the front axle a bit more" After all that, it should be a drastic improvement.😄 If only I had the extra money.😔
Until then, I'll just try getting rid of the spare tire and relocating the battery, and then hopefully it will be a bit better.😄
As for the wheels; Much appreciated..😊 these wheels have been kicking around forever, "and until this truck came along" they just wouldn't work with anything else.😂 Lol
Top notch display as usual 👍
Thanks Doug... Although "to me" I found it to be a bit disappointing, "not the video itself" but the truck.
I find myself being disappointed with the Scx10 III, and no matter what I do to it to make it better, it just keeps letting me down.😕 I think the next step with this truck is going to be a Overdrive front Ring & Pinion, and a set of High Clearance links, along with removing the spare tire and relocating the battery & or switching to a smaller battery for less weight.
And hopefully "after all that" it will be a little bit better the next time around.😊
Nice truck , get the battery up front and ditch the spare tire you'll go better 😊
Good call Jimbo, I wanted to keep the truck looking somewhat stock, but I agree with ditching the spare tire, that's just excess B.S. weight that doesn't need to be there.😁
As far as the battery location; I've been planning on that since the first run on the rocks, but just haven't done it yet.😁👍
Ultimately I should get rid of the driver figure,and the lead counter weight on the opposite side of the truck too,😂 But I'm not willing to do that just yet.. I think that every RC looks better with a driver figure behind the wheel.😊
Thanks for your great suggestions, and for checking out the video my friend.😁👍👉🏆
@R.C.A.D. I get the driver stuff , just get a little more up front , of course I would put on bigger tires and trim the body some but I just love my Dremel LoL
@jimbo4203 😄 ha ha ha
The Dremel part got me laughing 😂 👍🤜🤛
@@R.C.A.D. just Subbed you got some good stuff
@jimbo4203
My apologies for the late response Jimbo, I just finished a 5+ hour tour, doing a last minute lawn cleanup over here. But much appreciated for the sub, and I can't thank you enough for the channel compliments.😊👍🤜🤛