How To Replace Rear Sway Bar Links 2012-2020 Ford Focus
Вставка
- Опубліковано 16 вер 2024
- Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASS...
This video shows you how to install rear sway bar links on your 2012-2020 Ford Focus. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.
This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus
Tools you will need:
• 15mm Wrench 1aau.to/oa/1AXA...
• 18mm Wrench
• 8mm Socket 1aau.to/oa/1AXA...
• Socket Driver
• 5mm Hex Socket
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video,no wobbly camera work...nice and straight to the point!
My old 2005 Focus have identical parts. Great job.
Thanx man, this helped me a lot !
Great video. Very to the point. 👍
So easy
What do you do if Allen is stripped?
Shock absorber ?
Technically you can just jack the trailing arm up enough and the link will come out.
Why didnt you show which side goes in where?
Absolutely do not allow the bushing to spin! It wrecks the seals. Hold it still while you tighten the nuts. Especially don't use a power tool and just destroy the brand new ball joints. This is the absolute opposite of a good job. The actual service manual only costs 23 Dollars for 3 day access from motorcraft and tells you the right way. Torque values are 81 lower and 35 upper. This is a direct quote copied from the service manual: "NOTICE: Do not use power tools to remove or install the stabilizer bar link nuts. Damage to the stabilizer bar link ball joints and boots may occur. NOTICE: Make sure that the ball joint ball does not rotate."
No torque specs?