Wow I wouldn't want you working on my car using a pair channel locks to tighten down the coolant temp sensor and no Teflon sealant, not setting a good example!
Oil pressure installs in place of the stock sender/oil line (1/8"NPT) and there is nothing to install for the Volt gauge; the system monitors the power input to the control box.
I would like to use this system in my 74 Nova with a LS1 & 4l60E conversion. I'm using the new Holley Dominator system to control the engine a transmission, is the VHX compatible with my set up?
William, Thanks to the supplied sensors, our VHX systems can be used in nearly any application! The flexibility afforded by the solid state sensors for Oil Pressure, Water Temp and Speed, complete with weather-pack style harnesses allow VHX systems to find a home in hot rods of all types, regardless of drivetrain choice!
I did an ls swap in my 69 chevelle and my th400 had a vss connection that I currently have my psi harness connected to. The vhx kits says to plug your supplied sensor into the vss, would i wire my vss wiring from my swap harness into the dakota digital box?
that showed me absolutely nothing but how everything is hooked up afterwards, I need to know where each wire goes. Detailed instructions not oh its simple, no its not
Thanks Abdulla, Absolutely! That is one of the benefits of this package, our sensors are designed for either stock, modified late-model LS conversions. Because our system includes the proprietary sensors, this allows a wide range of flexibility.
i just did a complete fully detailed install on my channel on one of these systems on a camaro..great dash
install video that is..
I just bought a 71 Elco,,, can't wait to get a set of these.
looks killer!
I need a tutorial for 80-86 F series trucks!!!!
Wow I wouldn't want you working on my car using a pair channel locks to tighten down the coolant temp sensor and no Teflon sealant, not setting a good example!
CJ CJ
GREG IS actually USING water pump pliers..NOT channel locks!!!😉
Still trying to figure out how to hook up the turn signal wires on my 70.
Hey Thoran,
We can help! Contact our Tech crew at 800-852-3228, or techsupport@dakotadigital.com.
Coulda shown how the voltage and oil psi sensor was installed...Any hoo great video!
Oil pressure installs in place of the stock sender/oil line (1/8"NPT) and there is nothing to install for the Volt gauge; the system monitors the power input to the control box.
@@DakotaDigitalTV wow...thanks!!
Ok but how did you calibrate the speedometer?
There are two methods to calibrate the speedo; both listed in the installation manual. Do you have a system you need to dial in?
DakotaDigitalTV yes I’m trying to calibrate mine
I would like to use this system in my 74 Nova with a LS1 & 4l60E conversion.
I'm using the new Holley Dominator system to control the engine a transmission, is the VHX compatible with my set up?
William,
Thanks to the supplied sensors, our VHX systems can be used in nearly any application! The flexibility afforded by the solid state sensors for Oil Pressure, Water Temp and Speed, complete with weather-pack style harnesses allow VHX systems to find a home in hot rods of all types, regardless of drivetrain choice!
I did an ls swap in my 69 chevelle and my th400 had a vss connection that I currently have my psi harness connected to. The vhx kits says to plug your supplied sensor into the vss, would i wire my vss wiring from my swap harness into the dakota digital box?
Hello! There are a few options and details we need to nail down here; please contact us directly at: techsupport@dakotadigital.com.
that showed me absolutely nothing but how everything is hooked up afterwards, I need to know where each wire goes. Detailed instructions not oh its simple, no its not
Have it all hook up need zero the speedo for the tires with the GPS
Is this the silver face or white face?
Silver Alloy.
Does it work with ls conversions
Thanks Abdulla,
Absolutely! That is one of the benefits of this package, our sensors are designed for either stock, modified late-model LS conversions. Because our system includes the proprietary sensors, this allows a wide range of flexibility.
Water temp sensor is fugly. Wouldn’t want that looking at me when opening the hood. Relocate it
somebody in Dakota digital speak Spanish
Hello Eduardo,
Unfortunately not, however feel free to email our crew at sales@dakotadigital.com, we can utilize online translate tools!