here is a how to TailWhip! also if you would like to see my lacing video for a 4cross wheel check the discription! ua-cam.com/video/dP710UiZnZY/v-deo.html
Just built two wheels on my lunch break, first wheels I've built in nearly 20 years and the BEST tutorial out. Last time I used G-Sports guide, but this is so simple and so easy. Thanks dude
best video for a wheel build. i spent way too long today TRYING to follow other videos and lacing. This one helped tremendously, i was done in 10 minutes. thanks so much!
This video saved my butt twice,1st time on my own wheel and just tonight on a friend's wheel,every step is so well explained in this video it's basically impossible to mess the job up after watching it
I looked at a bunch of utube videos and they where full of useless information and drag on forever. This video is simple to the point and super cool..thanks
I've watched so many wheel lacing videos and ended up screwing up the lace by their videos, I watched yours and it was so straightforward and to the point that I really enjoyed lacing my wheel last week, in fact I'm back again to rewatch as I lace a second rim today! Great work! 🤘
Brо thank you so much, this is the best tutorial out there, I just bought a free coaster and I was so worried that I wouldn't be able to put it on the wheel, you saved my ass...Love brother
You make it look as easy as it's supposed to be. Twisted hub the wrong direction though. The spokes converge inside the valve stem hole, making it a little crowded to air it up. Twist the hub the opposite direction and the spokes will be practically parallel inside the valve stem hole.
excellent and helpful video, used it to lace a new ebike rim with new 12g stainless spokes and a new steel hub 3 cross, took all the confusion out of it, many thanks!!!!!
This is the only video that helped me lace a wheel I've watched multiple and they all seemed like rocket science this is the best you helped me lace my first wheel thanks brother. Gonna save me lots of $$
Dude great video. Never built a wheel despite being in a chair for 35 years and having them built. Decided to do this set myself and did both in under an hour! Thank you! I will say, I hope I wasn't the only one cussing like Happy Gilmore....."Get in your hole spoke! Don't you want to go home! This is your home spoke!" Then that sneeze hit and some poo came out and I had to regroup! Great video though thank you. Clear, easy and good camera work for a difficult project. Now......onto the tailwhip video so I can whip my chair! LOL
I know it's 2am and I'm high but I think this is one of the best lacing vids on UA-cam and you explain it so well... I just destroyed my kink Orion wheel and I have another nice rim but it's not laced so yea ... thanks this vid helped so much
First of all, thanks for uploading this video. I am going to replace the hub and spokes of my rear wheel. This is the best video of lacing a wheel so far I have seen. The "over, over, under, SKIP" trick is easy to remember. And the small wheel is good for teaching this work (and cute too). This video is very helpful, I appreciated it.
I have to say you have the best how to lace a bike rim video PERIOD. And I haven't done this since 1988, and this will make you laugh, it was with a 48 spoke Araya chrome rim lacing a coaster brake when I was doing my BMX freestyle back then. I just realized how you have a lot of awesome freestyle stuff, I'm 51 and just have an E mountain bike that looks a lot like my 1988 Haro Master frame that started out as transportation to get around town, and then adding aftermarket parts like in the old days started tricking her out, new brakes, Shimano DX type pedals, and suddenly I'm doing old jumps and easy street riding. Until, jumping my favorite tree root growing under pavement in a parking lot, I guess I had a weird angle, I bailed, and my backrim landed first, killing the rim and motor combo, so I thought. Then buying two different rims online that just wouldn't work, an old fashioned straightening of the old rim by placing it on a flat surface and then bending on it a bit like the good old days, and watching your really easy and simple video that you made perfectly because a lot of these other videos are really getting confusing when it come to flipping the rim over, and lacing it the other way. And then I finally got the rim together and it worked pretty decent except it had a pretty good kink in it still, and using my old fashioned rim truing memory, it's just about perfect with a little wobble like I road ramp and hung up on the back wheel. Thanks for your incredible videos I'm gonna watch more of them. I got a lot of BMX bike builds and old fashioned 80s freestyle heroes of mine on my playlist like RL Osborne, Eddie Fiola, Martin Aparejo. It was cool to see those guys ride back in the 80s in person, like the AFA freestyle Masters competition in Tampa in 1988. ESPECIALLY when me and my buddy Frank that rode at the same bike shop in Lake Mary Florida got to meet team Haro with Ron Wilkerson, blow Brian Blyther, Dave Nourie and the guy Dave that was a little older than us that assembled bikes and ran the bike shop a bit would drive us there said some guy named Ron called the bike shop and wanted to know some hot riding spots in Orlando and we joked and said Ron Wilkerson and laughed. You should've seen the look on her faces when it was actually Ron Wilkerson and we saw him and rode with all of them. I wish I didn't sell my GT Pro Performer frame and my Hutch Pro Raider frame a couple years back. Awesome channel man!
LOL I am in the same situation. At age 15 in 1989, I spoked my first wheels (48 hole Araya rims with some nice hubs) and haven't spoked any wheels since. I don't know how I even accomplished it! I still have THOSE wheels on my 1989 GT Pro F/S Tour but the chrome on the rims is wearing off where the brake pads make contact and the rubber hub bearing seals have rotted, so I am gonna have a go with spoking a new set of rims and hubs - with help from this video :)
Thank you David! Spent hours trying to lace one rim by looking at the other tire for HOURS, kept 'lacing wrong' over and over driving me nuts! Watched your video, and laced that F***er in under 15 min 1st try! You da man!
Sick music bro. Very old world, anonymous lounge on a corner, two very large fellas out front, definitely not softies, smokin a cigar, see thru socks wearing, pompadour sportin, 4 Cadillacs illegally parked on the street in front, type sounds. Very cool! Oh and about your video: one of the better ones I've seen. Definitely trying this and avoiding excess spending on lacing wheels. Thanks bro.
Just watched this while i worked on a new setup for the first time. Very clear and thorough and helpful to do the job right the first time. Thank you for making this, i found it to be exactly what i needed.
6 years down the track and you’ve mostly likely got your own kids ready for riding 😂😂 I’ve now been roped in as head bike mechanic for my grandkids ranging from 8 to 18. All this after looking after our own kids and doing my own repairs during my formative years 😂😂. But the big difference between now and my time is that back then, to have a wheel ‘relaced’ was about $2 at the local bike shop. Now, before you say “holy crap that’s cheap”, we’ll, back then, $2 would buy you 10 full beers! So dad wasn’t amused, he like his beer 😂😂 With my own kids I did all the work, including trying and welding frames as well as everything else and the local bike shop looked after the wheels (except punctures), our local guy was a good friend, quite old and a former Olympian, he actually passed away in front of our place during the Olympic torch relay for the 2000 Olympics after doing his part, very sad. Nowadays I’m all tooled up, but lack the lacing experience. Thank you making this video, you did well, easy to follow, really enjoyed watching. All the best for your future. Cheers from downunder 👋👋👋
Thank you so much. All the other videos are way too drawn out and complicated this is super simple and to the point I was able to lace a wheel in like 30 min
Mate i have to say thanks cause you made it easier than any of the other videos on youtube for me, and its my first time lacing a rim, so thanks heaps 🙏
thanks for this video I hadn't laced a pair of wheels since 86' and had totally forgotten how, I watched your video twice and laced a n.o.s. pair of ACS Z rims for my 85 Hutch Trickstar showbike. Your video was very informative and made this task very easy.
It's 2 years,and Priceless.I've had a rim setting,that didn't go right.I didn't know to Reverse on the second lacing.Thank you!(What I watched,the dude went so quick,I didn't see the reverse in lacing for the second side,and my spokes are about an 1" too long..LOL)
Dude we used to ride back in the day for a little while you were traveling Florida around 2016-2017 bro it’s awesome seeing you on UA-cam I just got back on my bike again
Great video, Thanks for sharing your nolage, Completed first laceing rebuild today. It took me 5 goes be fore the penny dropped, Man from Ireland says thanks. 🍀
Thanks dude. I am building a mini harley from scratch and I only know how to do a hub motor but not the regular front wheel. This video was a lot of help, never thought id be able to lace a wheel so well, as if it's straight up from a store or factory!
From all the videos I’ve watched today on this topic yours is the best , made it so simple and easy for me to follow and not get stressed. Thank you so much and love from upstate ny
So far this is the best tutorial i have seen. I wish you could made a video in how to do it by putting all spokes first on the hub before lacing it into the rim because it changes the process but still goes to the same outcome. In this video it became under,under,over while in other ways in goes over,over,under.
I’ve just bought new rims and I get the tomorrow and I got told this video is really good and easy to follow so I’ll find out tomorrow.(not trying to spend money on someone else doing it)
Awesome vid, ive only laced one wheel before (terribly)probably 5 years ago. I watched this got my elite hub laced and trued straight as an arrow like ive done it a million times. Your a legend 🤘🏻
Very nice instructional video. I plan to do this tonight with my 1995 vintage Hardrock Classic. A few nipples have broken due to corrosion in the past month or so, so it's time. EDIT1: Just snipped out the old spokes. Now I'm committed. EDIT2: Just laced it up with new black spokes. Pretty easy thanks to your video. Now I'm hoping you have a video on truing and tensioning. :-)
Dave, you should see the nearly 2hr. vid of an older German master wheel builder. OMG ! Just a little more complicated. Never knew they tied spokes. I’m not going there... Watching your vid, at least the valve hole ended up in the right place : ) PS I’ve used boiled linseed oil for spoke prep and seems to work fine. Concave nipple punch...you have to see the old master at work.
Thanks for taking the video up close. Most videos are a mile away from the camera and you can't tell what the hell is going on. Brilliant job dude, I know the video is a few years old but you should do more tutorials you're good at them and can possibly make a UA-cam career out of it.
Good simple vid on how to lace. I did a set of wheels 6 or seven years ago. Nice refresher corse. Trueing and tension is another story. And I forget the term for setting them. And you don’t want to wind them up... I used the rubberized handle of my park chain whip. Anyway good vid. I did mine in my easy chair and lap. Better glasses and some light would help.
Hi David. I will be lacing up my Araya 7X 20” rims soon. Video was great. I think I got this. Lol. Only thing I can’t figure out is how do I know what size spokes I need to buy for the 20x1.75 36H hoop with GT Mohawk hub? Also do I would those Araya rims came with Titanium spokes?
Ggeorge612 i dont know anything about those rims, i havent heard of them. But there are spoke calculators online where you put the hub and rim combo in and its tells you what you need for drive side or non drive side, but you should also just be able to call a bike shop and ask! Good luck
Great video. My first top hole in my rim is to the right. Do I do everything you do but just opposite? Like go to the left on the other side when putting the first spoke in? Thanks
i have costal wheel 12 gauge spokes 26" wheel can it be use on 36h disc brake hub right? my next question can i get away with the cheap truing station over the expensive one.anyway great explanation just need better camera work .
A really good video except your valve hole ended up where the spokes crossed instead of in the nice big gap between the parallel spokes next door like you had it on the other wheel you showed. Just tell them to rotate the hub the other way after the first round. Still a very good easy to follow video.
here is a how to TailWhip! also if you would like to see my lacing video for a 4cross wheel check the discription! ua-cam.com/video/dP710UiZnZY/v-deo.html
Just built two wheels on my lunch break, first wheels I've built in nearly 20 years and the BEST tutorial out. Last time I used G-Sports guide, but this is so simple and so easy. Thanks dude
@@ultimatewarrior1612 awesome!!
I have watched about 7 lacing videos and none have made as much sense as this one thank you.
best video for a wheel build. i spent way too long today TRYING to follow other videos and lacing. This one helped tremendously, i was done in 10 minutes. thanks so much!
This is the best video on lacing a 36 spoke wheel!
Thanks, really appreciate you!
This video saved my butt twice,1st time on my own wheel and just tonight on a friend's wheel,every step is so well explained in this video it's basically impossible to mess the job up after watching it
This tutorial blows away all the others I've seen! Thank you.
the best Tutorial video i found about BMX lacing.
Easiest tutorial to follow out of all those big name youtube channels lol straight to the point no bs. Thank you sir!
Its 2024 and this is still the best how to video iv seen in awhile, seriously thank you!!!!
I looked at a bunch of utube videos and they where full of useless information and drag on forever. This video is simple to the point and super cool..thanks
I've watched so many wheel lacing videos and ended up screwing up the lace by their videos, I watched yours and it was so straightforward and to the point that I really enjoyed lacing my wheel last week, in fact I'm back again to rewatch as I lace a second rim today! Great work! 🤘
@@chrisladelfa awesome, i watch this when i lace wheels still too hahah!
This is the best video on lacing up a wheel .And I seen many videos here.The best step by step instructions
Brо thank you so much, this is the best tutorial out there, I just bought a free coaster and I was so worried that I wouldn't be able to put it on the wheel, you saved my ass...Love brother
You make it look as easy as it's supposed to be. Twisted hub the wrong direction though. The spokes converge inside the valve stem hole, making it a little crowded to air it up. Twist the hub the opposite direction and the spokes will be practically parallel inside the valve stem hole.
Yes, remember the holes are 'slight angle. I forgot that so now we all know.
Damn i just finished lacing up the wheel and saw this comment and looking at it, it does look like its gona be hard to fill up the air
laced my first wheel alongside this video. thought it was gonna be much harder, thank you very much
Bro, you saved me 100 bucks and 5 days of no bike.
Thanks brother, much appreciated!
excellent and helpful video, used it to lace a new ebike rim with new 12g stainless spokes and a new steel hub 3 cross, took all the confusion out of it, many thanks!!!!!
This is the only video that helped me lace a wheel I've watched multiple and they all seemed like rocket science this is the best you helped me lace my first wheel thanks brother. Gonna save me lots of $$
Thank you, much better than the other professional videos I've watched
Dude great video. Never built a wheel despite being in a chair for 35 years and having them built. Decided to do this set myself and did both in under an hour! Thank you!
I will say, I hope I wasn't the only one cussing like Happy Gilmore....."Get in your hole spoke! Don't you want to go home! This is your home spoke!" Then that sneeze hit and some poo came out and I had to regroup!
Great video though thank you. Clear, easy and good camera work for a difficult project. Now......onto the tailwhip video so I can whip my chair! LOL
I know it's 2am and I'm high but I think this is one of the best lacing vids on UA-cam and you explain it so well... I just destroyed my kink Orion wheel and I have another nice rim but it's not laced so yea ... thanks this vid helped so much
First of all, thanks for uploading this video. I am going to replace the hub and spokes of my rear wheel. This is the best video of lacing a wheel so far I have seen. The "over, over, under, SKIP" trick is easy to remember. And the small wheel is good for teaching this work (and cute too). This video is very helpful, I appreciated it.
Thanks for sharing this motivational informative instructional video! Can't wait to lace my own wheel one day!
Lucas Lage its kinda hard for scooter wheels, but good luck!
I have to say you have the best how to lace a bike rim video PERIOD. And I haven't done this since 1988, and this will make you laugh, it was with a 48 spoke Araya chrome rim lacing a coaster brake when I was doing my BMX freestyle back then. I just realized how you have a lot of awesome freestyle stuff, I'm 51 and just have an E mountain bike that looks a lot like my 1988 Haro Master frame that started out as transportation to get around town, and then adding aftermarket parts like in the old days started tricking her out, new brakes, Shimano DX type pedals, and suddenly I'm doing old jumps and easy street riding. Until, jumping my favorite tree root growing under pavement in a parking lot, I guess I had a weird angle, I bailed, and my backrim landed first, killing the rim and motor combo, so I thought. Then buying two different rims online that just wouldn't work, an old fashioned straightening of the old rim by placing it on a flat surface and then bending on it a bit like the good old days, and watching your really easy and simple video that you made perfectly because a lot of these other videos are really getting confusing when it come to flipping the rim over, and lacing it the other way. And then I finally got the rim together and it worked pretty decent except it had a pretty good kink in it still, and using my old fashioned rim truing memory, it's just about perfect with a little wobble like I road ramp and hung up on the back wheel. Thanks for your incredible videos I'm gonna watch more of them. I got a lot of BMX bike builds and old fashioned 80s freestyle heroes of mine on my playlist like RL Osborne, Eddie Fiola, Martin Aparejo. It was cool to see those guys ride back in the 80s in person, like the AFA freestyle Masters competition in Tampa in 1988. ESPECIALLY when me and my buddy Frank that rode at the same bike shop in Lake Mary Florida got to meet team Haro with Ron Wilkerson, blow Brian Blyther, Dave Nourie and the guy Dave that was a little older than us that assembled bikes and ran the bike shop a bit would drive us there said some guy named Ron called the bike shop and wanted to know some hot riding spots in Orlando and we joked and said Ron Wilkerson and laughed. You should've seen the look on her faces when it was actually Ron Wilkerson and we saw him and rode with all of them. I wish I didn't sell my GT Pro Performer frame and my Hutch Pro Raider frame a couple years back. Awesome channel man!
LOL I am in the same situation. At age 15 in 1989, I spoked my first wheels (48 hole Araya rims with some nice hubs) and haven't spoked any wheels since. I don't know how I even accomplished it! I still have THOSE wheels on my 1989 GT Pro F/S Tour but the chrome on the rims is wearing off where the brake pads make contact and the rubber hub bearing seals have rotted, so I am gonna have a go with spoking a new set of rims and hubs - with help from this video :)
thanks so much!! I spent all of over an hour watching videos and was lost still. thank you so much!!
One of the best tutorials on how to lace a wheel i have ever watched
Thank uu Soooo much 👌👌
Thank you David! Spent hours trying to lace one rim by looking at the other tire for HOURS, kept 'lacing wrong' over and over driving me nuts! Watched your video, and laced that F***er in under 15 min 1st try! You da man!
Thanks man. You don’t make it seem intimidating like the rest of guys. Great video.
Thanks David , honestly I have watched a number of tutorial videos.... your video is the best, easy and clear.
appreciate that !
i used this guide to build a mountain bike rear wheel. you rock dude.
For me this is the best video for lacing on UA-cam !!!! Thank you very much
Sharokis thanks for the feedback! Any more how to’s that would be helpful i would be more than happy to make!
Dude this literally was so easy and saved me from wasting money i wanted to do it myself and you let me hell ya man !!!
Sick music bro. Very old world, anonymous lounge on a corner, two very large fellas out front, definitely not softies, smokin a cigar, see thru socks wearing, pompadour sportin, 4 Cadillacs illegally parked on the street in front, type sounds. Very cool! Oh and about your video: one of the better ones I've seen. Definitely trying this and avoiding excess spending on lacing wheels. Thanks bro.
Just watched this while i worked on a new setup for the first time. Very clear and thorough and helpful to do the job right the first time. Thank you for making this, i found it to be exactly what i needed.
awesome, happy you could do it!
@@daobmx thank you and thanks again for taking the time to help
One of the best lacing tutorial i watched
Thanks, followed your advice, first time I've done a bike rim. Really appreciate your blog.
6 years down the track and you’ve mostly likely got your own kids ready for riding 😂😂
I’ve now been roped in as head bike mechanic for my grandkids ranging from 8 to 18. All this after looking after our own kids and doing my own repairs during my formative years 😂😂.
But the big difference between now and my time is that back then, to have a wheel ‘relaced’ was about $2 at the local bike shop. Now, before you say “holy crap that’s cheap”, we’ll, back then, $2 would buy you 10 full beers! So dad wasn’t amused, he like his beer 😂😂
With my own kids I did all the work, including trying and welding frames as well as everything else and the local bike shop looked after the wheels (except punctures), our local guy was a good friend, quite old and a former Olympian, he actually passed away in front of our place during the Olympic torch relay for the 2000 Olympics after doing his part, very sad.
Nowadays I’m all tooled up, but lack the lacing experience.
Thank you making this video, you did well, easy to follow, really enjoyed watching.
All the best for your future.
Cheers from downunder
👋👋👋
Thank you so much. All the other videos are way too drawn out and complicated this is super simple and to the point I was able to lace a wheel in like 30 min
awesome!
This was the only video that helped me. Not sure it has music or just "over over, under, skip a hole" mantra.
Mate i have to say thanks cause you made it easier than any of the other videos on youtube for me, and its my first time lacing a rim, so thanks heaps 🙏
thanks for this video I hadn't laced a pair of wheels since 86' and had totally forgotten how, I watched your video twice and laced a n.o.s. pair of ACS Z rims for my 85 Hutch Trickstar showbike. Your video was very informative and made this task very easy.
It's 2 years,and Priceless.I've had a rim setting,that didn't go right.I didn't know to Reverse on the second lacing.Thank you!(What I watched,the dude went so quick,I didn't see the reverse in lacing for the second side,and my spokes are about an 1" too long..LOL)
Dude we used to ride back in the day for a little while you were traveling Florida around 2016-2017 bro it’s awesome seeing you on UA-cam I just got back on my bike again
sweet dude! awesome
Great video,
Thanks for sharing your nolage,
Completed first laceing rebuild today. It took me 5 goes be fore the penny dropped,
Man from Ireland says thanks. 🍀
Thanks dude. I am building a mini harley from scratch and I only know how to do a hub motor but not the regular front wheel. This video was a lot of help, never thought id be able to lace a wheel so well, as if it's straight up from a store or factory!
awesome!! glad it worked for you
From all the videos I’ve watched today on this topic yours is the best , made it so simple and easy for me to follow and not get stressed. Thank you so much and love from upstate ny
So far this is the best tutorial i have seen. I wish you could made a video in how to do it by putting all spokes first on the hub before lacing it into the rim because it changes the process but still goes to the same outcome. In this video it became under,under,over while in other ways in goes over,over,under.
This was Awesome! I also love the 🎵elevator Interlude Music🎶🤣
Hey man thanks I used this as a tutorial while re-building my first wheel. Saving some money and fixing some dump finds up
happy it helped!
I’ve just bought new rims and I get the tomorrow and I got told this video is really good and easy to follow so I’ll find out tomorrow.(not trying to spend money on someone else doing it)
just finished building thank you so much super easy
Thanks Dude.....it is the best tutorial I ever watched regarding lacing wheel....so easy to follow and understand...More Power..
Thanks bro laced my first wheel using your tutorial
Man I gotta say you killed it! I laced up my wheels in under 20 minutes each all thanks to your vid. 👊🔥🙏🙏
just laced my first pair of wheels today. piece of cake thanks to your awesome video.
thanks and greetings from vienna, austria. :)
Thank you mah dood.
Wheel laced, trued and ready for shreddy!
Great video,
Thanks for sharing your nolage,
Just completed my first build.
Man from Ireland says thanks.🍀
I successfully laced my first freecoaster to my rim today😎👍! I'll save this tutorial for when I receive the correct front hub that I ordered.
always building my own wheels from now on, best tutorial on youtube by far! thanks for making this so easy to follow brotha!
thanks for watching, happy it helped!
Awesome vid, ive only laced one wheel before (terribly)probably 5 years ago. I watched this got my elite hub laced and trued straight as an arrow like ive done it a million times. Your a legend 🤘🏻
Very nice instructional video. I plan to do this tonight with my 1995 vintage Hardrock Classic. A few nipples have broken due to corrosion in the past month or so, so it's time.
EDIT1: Just snipped out the old spokes. Now I'm committed.
EDIT2: Just laced it up with new black spokes. Pretty easy thanks to your video. Now I'm hoping you have a video on truing and tensioning. :-)
thank you very making this amazing video. it has helped me so much and I'm in the process of lacing my cassette hub right now
Awesome! Glad to help 🤘🏻
22 minutes I laced my Wethepeople helex freecoster awesome video 👌
just laced up my first set! killer video
Cant stress enough how comprehensive this video was made in comparison to others related
Thanks got mine done today after stuffing it up in the beginning but watched this and figured it out lol
best explenation video that i found on UA-cam (thanks)
the best tuto a have ever seen
So easy to understand cant wait to lace my own wheel :)
Great video, re-building my Ukai speedlines with high flange suntour hubs .. thanks bud
This video is great man thanks. Gonna use this to build my wheel once my hub comes in.🤘👌👍
This video is awesome, built my first wheel and full Tru in less than 45 minutes 😈😈😈
Very easy to understand i have wanted to do this for a long time thank you so much for your video.
You should make a " how to true a bmx rim" starting from after lacing
Good descriptive video , my old mountain bike was a bit of bear to respoke as nipples have pretty short threaded area but a few retrys and it's done ☺
This is the best and most helpful one thank you
Thanks sooo much man!! You made this so easy to do.
Thanks for the tutorial mate! Very easy to follow!
Thanks bro. Only useful video on this I found.
Videos old but information is still good just laced my first wheels 🔥🔥
btw the rest of your story is well explained ,nice and relaxed
nice video , it helps me a lot. thanks I learned much.
Dave, you should see the nearly 2hr. vid of an older German master wheel builder. OMG ! Just a little more complicated. Never knew they tied spokes. I’m not going there...
Watching your vid, at least the valve hole ended up in the right place : )
PS
I’ve used boiled linseed oil for spoke prep and seems to work fine.
Concave nipple punch...you have to see the old master at work.
Best example so far thx bud
Thanks for taking the video up close. Most videos are a mile away from the camera and you can't tell what the hell is going on. Brilliant job dude, I know the video is a few years old but you should do more tutorials you're good at them and can possibly make a UA-cam career out of it.
thats the goal, thanks for the comment! i am interested in making more tutorials, what else would you like to see?
@@daobmx it'll be cool to see how you true your wheel. You're welcome and good luck bro.
Great video. The practice is the key...
Good simple vid on how to lace. I did a set of wheels 6 or seven years ago. Nice refresher corse.
Trueing and tension is another story. And I forget the term for setting them. And you don’t want to wind them up...
I used the rubberized handle of my park chain whip.
Anyway good vid. I did mine in my easy chair and lap. Better glasses and some light would help.
Oh right, you have to STRESS the spokes. And watching a guy do this standing on the spokes. Well, I’m not that brave. I’d consult Sheldon Brown...
I had to do a 2 cross pattern cause my front hub is kind of small but this video still worked great 👍
I say for a young lad you very clear explain and show how to lace wheel CORRECT. I manufacture the alloy rims. You lace. Part YOUR CV!
thanks for this tutorial bro, that gona help me for my first building wheel
M4rty Cub3r hope it turns out nice
Awesome video! Was super helpful and saved me a bunch of money. Great job!
happy it helped!
Thanks for this clearer explanation!
Hi David. I will be lacing up my Araya 7X 20” rims soon. Video was great. I think I got this. Lol. Only thing I can’t figure out is how do I know what size spokes I need to buy for the 20x1.75 36H hoop with GT Mohawk hub? Also do I would those Araya rims came with Titanium spokes?
Ggeorge612 i dont know anything about those rims, i havent heard of them. But there are spoke calculators online where you put the hub and rim combo in and its tells you what you need for drive side or non drive side, but you should also just be able to call a bike shop and ask! Good luck
Great video. My first top hole in my rim is to the right. Do I do everything you do but just opposite? Like go to the left on the other side when putting the first spoke in? Thanks
that sounds like it would work, good luck!
@@daobmx I’ll give it a go. Thanks
i have costal wheel 12 gauge spokes 26" wheel can it be use on 36h disc brake hub right? my next question can i get away with the cheap truing station over the expensive one.anyway great explanation just need better camera work .
dread knot i have never used a disc brake hub or know anything about them
this actually help so much thank you sir
do you need different sized spokes for hubs with different flange sizes like yours?
A really good video except your valve hole ended up where the spokes crossed instead of in the nice big gap between the parallel spokes next door like you had it on the other wheel you showed. Just tell them to rotate the hub the other way after the first round. Still a very good easy to follow video.
yes i wish i had done the how to wheel like that.
Thanks heaps finally got it laced up!!
45 minutes i laced my first wheel!!:)