Excellent videos. Really appreciate you taking the time to make such a thorough videos as well as your extra input for grease and Rust Check. Well done
It's ok to cover oil drain plug, get a mity vac if you have more than a couple machines/motors to maintain, warm up motor and oil a bit by running, mity vac it, all good, and can cover bolt. Carry spare pins in under seat tool compartment, they fall out on occasion. Looks like I may be adding some weights to the plow blade. We are only using it on sidewalks, not traveling any distance, maximizing clearing power. Thanks for the vid!
My bike didn't have a skid plate, if you have one you will probably have to remove it if you use the mounting bolts that come with the kit as they are u bolts that go around the frame to mount the plate
Excellent videos. Really appreciate you taking the time to make such a thorough videos as well as your extra input for grease and Rust Check. Well done
Thank you, just uploaded a plowing one two days ago, that's when the fun begins playing with it!
It's ok to cover oil drain plug, get a mity vac if you have more than a couple machines/motors to maintain, warm up motor and oil a bit by running, mity vac it, all good, and can cover bolt. Carry spare pins in under seat tool compartment, they fall out on occasion. Looks like I may be adding some weights to the plow blade. We are only using it on sidewalks, not traveling any distance, maximizing clearing power. Thanks for the vid!
Grease the Pins and 'R' clips. Push in 'R' clips front back so they can only push on the Pin deeper if you straddle some deep snow.
Great tip!
You should install the cotter pins from the front ,going to the back so that you don't lose the pins in case you hit something under it.
Great tip
Thanks for the video seems like the best one to show the mounting bracket and how it hooks up
Thank you :)
I welded 3” steel plates on each side of my mount and able to mount the plate to the frame sides…..Same as your 4 wheeler
Hi. Where did you buy the mount for snow plow. I have exact same atv but not finding the one showed in video?
The plow mount was included with the plow when I bought it
Thank you
Lorneville trail riders! Didn't expect to see that when I googled plow mounting videos.
It's a small world! :)
Where did you buy this mount. Can you share the link please?
It came with the plow
Where do you get the winch mount for this atv been looking for one but cant find one for it
I had bought this one on ebay a few years ago, and the winch is a 3500lb champion winch
And the plow mount came with the plow as a kit
How many foot torque did you use to tighten those bolts?
1500 lol
You should add 2in coil spacers to it so it sag as much.
Looking for a lift but they are a bit pricy
If you take a grinder and cut them bolts off underneath it would be a lot easier on your fingers
Totally agree!!
How do you like this plow? I'm thinking about getting one
So far it is working g great, here's a video on using it: ua-cam.com/video/zkcdWmjwJHc/v-deo.html
I also added an installation video to the channel on putting it all together
Dumb question....I presume if you have a full skid plate (s) underneath you would need to remove them?
My bike didn't have a skid plate, if you have one you will probably have to remove it if you use the mounting bolts that come with the kit as they are u bolts that go around the frame to mount the plate
Where did you get your plow from ? What's the website ??
Brand: Powermax
4.1 out of 5 stars 14Reviews
Universal atv/utv snow plow kit 60"
I bought it off amazon Canada
ua-cam.com/video/ijRC5r1ShVs/v-deo.html
You might fetch up this winter.. I will pull you out for $5....
4.50
lining up the plow to attach is not easy
I agree!
You are very handsome...I wish you would do more close ups...
Thank you, I had a recent hair cut
Dude ya gotta put it all together at once not half a job
Roger