Thanks for another great wash video Jay. The noise the 94 machine is making during spin is likely the spin bearing beginning to wear out. No big deal as the part is still available.
One day it just started making that sound. Oh well. When they need service, they will get service. But they live in a nice relaxing environment, with at most half the work one of these would have to endure.
If you ever do wanna get the iron stains out of the newer machine, especially with it having the white tub, use Iron Out which I’m sure you have heard of. Magical stuff, very cheap. Takes it all out the first time usually. Will look brand new again after the treatment. Could definitely film it too for some new exclusive content for the twerps here too
I have Iron Out. Why wouldn't I? Not sure how well it will work on that plastic. It's kind of like Tupperware you've had tomato sauce in, it stays like that forever. I'm sure Iron Out would work well on fabric, like it's designed for.
@@jaykay18 We had a old dishwasher with a plastic tub, it was completely stained orange from top to bottom when we moved in, the chrome spray arm was literally gold from the iron. Many many years later I decided to do something about it. One run with a cup of Iron Out and the entire interior was like new again, the spray arm was even its chrome yet again. I didn’t think it would work well either…also used it for my own Whirlpool washer for the iron in the tub and that came out instantly as well.
I think it's important for the twerps to switch sides or else they will end up with one arm looking like Arnold Schwarzenegger and the other looking like Twiggy. Gotta keep them balanced.
My Speed Queen electric dryer quit heating after seven years. Is it more likely a fuse, heating element, or limit. What is the most common cause for an old-school electric dryer to not heat?. I do have a high-end multimeter if that is needed. I am nineteen and am training to repair equipment currently.
You are correct in your assumptions. It's also possible the heating coil itself has failed. The way you know what went is your multimeter. Isolate each component by disconnecting it, and meter for continuity.
Definitely. It turns out that the high limit was going bad, and that tripped it’s fuse. I went to an appliance parts store, and I bought a new limit and fuse. As soon as I replaced those two parts, it was working again! I got 10.8 ohms for the heating element, so I knew that it was still good, and I did not need to waste my time removing it!
@@jaykay18 well i sure can respect that maybe you can ask them if they could do it the more people you have the less the cost each one can carry his own load. the last time you lex and sharkie had a wash day wash in was 2019! man 4 YEARS ALREADY WOW!😮
@@jaykay18 interesting. I never knew you could install a switch to activate warm water rinses haha. I cant wait for you to see my new kenmore elite I found in my neighborhood. Idk why these people would throw away such a special direct drive but Its mine now so it’s their loss haha.
@@jaykay18 exactly. This is definitely a rare kind of machine with a lot of special features but now I got a reason to throw out that GE that wants to fail on me lol.
@@biggysmoovemusic7777 Extra special features means a lot more wire connections and contact point, and therefore problems. Usually dead reliable, as expected, but can be a bit more involved to diagnose.
Very nice wash-in. Also nothing going wrong here. No washers going out of balance. No Tide Pod Challenge either.
Of course not. I do laundry the old-fashioned way, with older machine that work, and don't get into social media. All trouble saved!
Very nice wash-in. Glad to have been able to participate in one, finally!
Oh yeah, it was awesome! It gets real with the microphones and headset and light on the rig, and look at what we have to look back at!
Thanks for another great wash video Jay. The noise the 94 machine is making during spin is likely the spin bearing beginning to wear out. No big deal as the part is still available.
One day it just started making that sound. Oh well. When they need service, they will get service. But they live in a nice relaxing environment, with at most half the work one of these would have to endure.
If you ever do wanna get the iron stains out of the newer machine, especially with it having the white tub, use Iron Out which I’m sure you have heard of. Magical stuff, very cheap. Takes it all out the first time usually. Will look brand new again after the treatment. Could definitely film it too for some new exclusive content for the twerps here too
I have Iron Out. Why wouldn't I? Not sure how well it will work on that plastic. It's kind of like Tupperware you've had tomato sauce in, it stays like that forever. I'm sure Iron Out would work well on fabric, like it's designed for.
@@jaykay18 We had a old dishwasher with a plastic tub, it was completely stained orange from top to bottom when we moved in, the chrome spray arm was literally gold from the iron. Many many years later I decided to do something about it. One run with a cup of Iron Out and the entire interior was like new again, the spray arm was even its chrome yet again. I didn’t think it would work well either…also used it for my own Whirlpool washer for the iron in the tub and that came out instantly as well.
@@Goldenwoodz I'll keep that in mind, thanks.
Love those whirlpool direct washers. You are funny.
Thanks.
I think it's important for the twerps to switch sides or else they will end up with one arm looking like Arnold Schwarzenegger and the other looking like Twiggy. Gotta keep them balanced.
Har Har! Sad part is, most of them don't know who either of those people are.
Great job Jay and Dynatrak
Thank you.
@@jaykay18 you're welcome
@@randytorboli Ah, very good!
What is your opinion on the Maytag Performa washing machine made by Norge?
Send me one and I'll let you know.
My Speed Queen electric dryer quit heating after seven years. Is it more likely a fuse, heating element, or limit. What is the most common cause for an old-school electric dryer to not heat?. I do have a high-end multimeter if that is needed. I am nineteen and am training to repair equipment currently.
You are correct in your assumptions. It's also possible the heating coil itself has failed. The way you know what went is your multimeter. Isolate each component by disconnecting it, and meter for continuity.
Definitely. It turns out that the high limit was going bad, and that tripped it’s fuse. I went to an appliance parts store, and I bought a new limit and fuse. As soon as I replaced those two parts, it was working again! I got 10.8 ohms for the heating element, so I knew that it was still good, and I did not need to waste my time removing it!
You know what you need to do someday get everyone there sharkie, lexmarks ,and tallboy. That would be the ultimate!😃
Pay everyone's salary and transportation costs, and I can make it happen.
@@jaykay18 well i sure can respect that maybe you can ask them if they could do it the more people you have the less the cost each one can carry his own load. the last time you lex and sharkie had a wash day wash in was 2019! man 4 YEARS ALREADY WOW!😮
@@shaunkanary997 There's no less cost for more people, in fact, there's more cost.
@@jaykay18 ok well it was worth a shot.
@@shaunkanary997 Money talks, everybody else walks. With enough money, you can move mountains, and indeed some have.
Just got word from my Jergens rep. They no longer wish to be associated with washer twerps
I'll do the jokes, thanks.
@@jaykay18 I tried
@@KappaCow You get an honorable mention.
the drain sounds so good
Of course.
As a new viewer, I'm TOTALLY confused.... lol but intrigued... and dare I say, titillated.
Nobody makes washing machine videos like I do. Funny enough, "titillated" is something those washer twerps will probably never get!
@@jaykay18I kinda expected the definition even after I looked it up. XD XD.
Much like "expected a ";" at line 35 of source.cpp". XD
@@yalekthelembine0391 Still, probably the best word that could have been used!
When did you install that switch? I’ve must’ve missed a lot
That was back in 2017! 7 years ago, that's way too long. I post a video every day, you gotta keep up!
@@jaykay18 interesting. I never knew you could install a switch to activate warm water rinses haha. I cant wait for you to see my new kenmore elite I found in my neighborhood. Idk why these people would throw away such a special direct drive but Its mine now so it’s their loss haha.
@@biggysmoovemusic7777 They just don't know what they have.
@@jaykay18 exactly. This is definitely a rare kind of machine with a lot of special features but now I got a reason to throw out that GE that wants to fail on me lol.
@@biggysmoovemusic7777 Extra special features means a lot more wire connections and contact point, and therefore problems. Usually dead reliable, as expected, but can be a bit more involved to diagnose.