How to build your FOOD TRUCK DRAINS

Поділитися
Вставка
  • Опубліковано 21 сер 2024
  • The most important part of any Food Truck or Trailer is your water system. The Seamster will show you in detail how to set up your drainage options :)

КОМЕНТАРІ • 30

  • @josphimasthefamous6932
    @josphimasthefamous6932 5 місяців тому

    Big shout out to you buddy! My son and I are doing a food trailer and your drain system is on point for us!

  • @jamesfrederick99
    @jamesfrederick99 24 дні тому

    12:00 Hawk-toughee. Spit on that thang.

  • @farmher3117
    @farmher3117 5 місяців тому

    Thanks so much! That was so helpful!!!

  • @brendan8363
    @brendan8363 Рік тому +3

    Those aren’t air gaps, they’re basically a p-trap. If your tank backs up, it will still back up to the sink, which is what an air gap will prevent. Our county requires air gaps, not just a p trap.

    • @TheSeamster
      @TheSeamster  Рік тому

      It passed inspection and it’s a backflow prevention.

    • @brendan8363
      @brendan8363 Рік тому +2

      @@TheSeamster Good to hear - glad you're up and running! Still, backflow prevention is different from an air gap. I found this video when I was searching for an air gap solution as required for our food trailer. These won't pass as air gaps here. Not offering this as criticism, just hoping to clarify for others that are looking for air gap info. Thanks for posting your experiences - lots of good information here.

    • @billyhaywood7749
      @billyhaywood7749 Рік тому

      l agree with brendan,that is not air gap it would never pass by inspector. Air gap have a two inch space between the drain &PVC pipe

    • @sylviedubois1747
      @sylviedubois1747 5 місяців тому

      What are they called? Will you answer us please

    • @onetonf350
      @onetonf350 3 місяці тому

      @@brendan8363HOW are you supposed to travel in the food truck or trailer with fumes from the grey tank getting inside the trailer from an open pipe coming out of the tank. Or even the possibility of splashing

  • @repeekyraidcero
    @repeekyraidcero Рік тому

    Excellent.
    Thx

  • @taracarrel3137
    @taracarrel3137 Рік тому

    Our health dept requires a back flow preventer. Where should it go. Thanks for everything!

  • @charris6568
    @charris6568 Рік тому +1

    Can u give a link or part number for the air gaps u used here pls?

  • @Dirtebker
    @Dirtebker 4 місяці тому

    Found the drains! They are called “exterior evacuation drain traps”. You’re welcome!

  • @michaeljackson7361
    @michaeljackson7361 Рік тому +2

    What did the sinks and faucets cost ya? Great video!

    • @TheSeamster
      @TheSeamster  Рік тому +1

      About $75 2 years ago.

    • @michaeljackson7361
      @michaeljackson7361 Рік тому

      @@TheSeamster thanks. Good work bro

    • @JavierRodriguez-sm4jw
      @JavierRodriguez-sm4jw 4 місяці тому +1

      Please can you put a link and name the model and serial number of the sink and the faucet and what where you got them at. Thank you

  • @GaryMoore-vu6bv
    @GaryMoore-vu6bv Рік тому +2

    where did you find the air gap drains looked on lowes and home depot wesites and could not find

    • @TheSeamster
      @TheSeamster  Рік тому +1

      These were purchased on eBay , also the sinks and faucets.

    • @ronaldfontenot1897
      @ronaldfontenot1897 Рік тому

      What is the actual name of them?

    • @charris6568
      @charris6568 Рік тому

      Did u find them?

    • @sylviedubois1747
      @sylviedubois1747 5 місяців тому

      Seriously. What is the actual name of them? So we can purchase it. Nobody's answering the question

  • @mrniceguy8600
    @mrniceguy8600 7 місяців тому

    What size fittings and hoses for drain and basins?

  • @MB-ir8xf
    @MB-ir8xf Рік тому +2

    If you set up that truck all by your self I have to give you credit because I was crinching when i saw the way you were using those channel locks.

    • @TheSeamster
      @TheSeamster  Рік тому

      Yes, been using them for years and not everyone can use tools the same.

    • @MB-ir8xf
      @MB-ir8xf Рік тому

      I am not sure if you understood my comment? you were using those channel locks completely wrong!

    • @TheSeamster
      @TheSeamster  Рік тому +1

      @@MB-ir8xf no I understood you and they have never failed me even when building my house completely with just my son and passed every inspection. Everyone uses tools in their own way to get a job done and as long as the job gets done quick and correct. If that made you cringe, check out when I cut FRP with my 4 inch hand grinder with the guard off. But thanks for taking the time to let me know how to get ur done.

  • @demarc2911
    @demarc2911 Рік тому

    p͎r͎o͎m͎o͎s͎m͎

  • @Dirtebker
    @Dirtebker 4 місяці тому

    What is the name of the air gap drains? Having trouble finding them.