I just wonder, is it really allowed to calculate anything during the run, even without calculator. Doesn’t it allowed right? Who know this just reply to me.
I’ve been grinding seeds as an amateur speed runner, without really having the skill or methods to complete a run quickly. Videos like these always help out, so thank you.
Wanna add more things : - You can use shift f3 to search for bells at spawn, it'll tell you there is a village nearby, also is there is a furnace there is a weaponsmith (not on taiga villages). - In the nether, on the before last line, you can see two numbers : M and C. M stands for dispawnable aggressive mobs and C for dispawnable neutral creatures, but we know that the piglins in bastions are mobs that cant dispawn. So then you need to add up those two numbers, and substract the second E number, every slice of 30 entities is a bastion, so you can know if there is one or more bastions around you at spawn if you did not looked right after teleporting.
also, if you don't get a multiple of 30 after subtraction, it could mean that the bastion is half loaded, i.e. your render distance only renders half the bastion, so you can increase your render distance by a bit to confirm that it is a bastion
Bridge has only 20 entities and stables has a quite a lot so the difference can be more or less than 30 as long as there’s a decent gap between e and m+c then you have a bastion(s)
I am not interesting in speedrunning but the high level tactics used for them are really nice to know for general min/max gameplay. As someone with 0 speed running experience, this guide was honestly incredibly easy to follow!!
More uses: If you see bells on the pie chart in the overworld, there's a village If there's a furnace and brewing stand but no bell, there's an igloo with a basement If there's a chest in the end, there's an end city Also, when you see "blockentities", right below it is usually "tick" (sometimes it will say "regular" above it instead), and if you use this, you can see all loaded entities.
nice video ! BUT i tried for the fortress and in my pie chart I don't see "minecraft spawner" it is not workin :( I tried with a fortress by placing me at 4 chunks of the spawner and when i increase my render distance to 4 there isn't any changes... why ?
In Minecraft 1.21 if you have Render Distance set to 2 chunks it renders 4 chunks in total which 2 chunks it renders on the monitor (where the first chunk is always the chunk where the player is located) + 2 pre-rendered chunks just to know exactly how far away the mob spawner is. Also the Render Distance affects only the horizontal chunks the vertical ones are rendered but not seen on the monitor more than 2 in infinite number of times.
I'm having this thing on 1.16.1 when I F3+F until I get the spawner in my pie chart (for example at 12), but if I decrease the render distance only by 1 (to 11), it does not go away. For it to go away I have to decrease it all the way back to 2 and then up it incrementally (to 11) to test for the direction. Is this normal or is it some kind of bug?
probably changed in 1 19, because nobody speedruns 1 17+... i tried this thing in 1 20, and nothing worked too. even F3 + F was removed in 1 19 snapshot
Why cant i refresh my pie ( I have to quit the world and go back to and that the only way to refresh ), and i cant add my render distance Bu pressing F3+F (i have to add it manually), please i need answer
Hey , whenever I open my piechart(2 chunks distance),spawner one always appears.mayne it's a glitch in Minecraft cracked version but high chances are that it's my fault. Can anybody help me?I am an old Minecraft player yet a new speedrunner
im p sure thats allowed cuz divine travel is allowed and divine travel is like the most stupidly OP thing ever assuming you can do it, but double check anyways
the pie chart still loads 6 chunks when you set the render at 2 because of the 4 chunks cap the pie chart has for some reason, so you're likely to have a spawner within 6 chunks and the pie chart is just looking like not having refreshed.
AINTNOWAY I USED THIS TUTORIAL MID SPEEDRUN, I TRIED THE FORTRESS THING WALKED 30 MINUTES STRAITGH TO SOUTH BECAUSE IT SHOWS A SPAWNER, NOTHING. WENT IN CREATIVE WAS THE NEAREST FOTRESS THE OTHER WAY AINTNOWAY BROTHER
how to blind travel in 1 sentence: add your x and z coordinates to a number between 250 and 300. bam, ez blind travel (ignore the negative sign if the number is negative) for example: if im at -100, 170, thats really good blind travel coords because i only take the numbers and ignore the negative. so that wouyld be 100+170=270, and 270 is between 250 and 300.
Whenever i use fabric mode with sodium my entities count never work as expected, when i use vanilla it's fine, going to fabric even when i'm looking in the direction of the bastion i get a low count. I have my entity render distance 500% and i think every other option is good. It sucks speedrunning in vanilla tbh : (
you need to have entity culling disabled, it's in the third tab in sodium's options. Also if you downloaded sodium like 4 months ago you need to update it for this to work.
lmao I was so confused as I tried this out in a random survival world, but it was just the seed that got me 2 bastions in 3 chunks - the seed: -7010268609620231452
I need help on fortress finding, I put my render distance to 2 and refreshed the pie, but the spawner wont go away, so I tried going quite far away and doing the same thing, but the spawner and chest will not go away from the pie. Is there like 20 different spawners each chunks??
Because strongholds spawn in a ring, can't you also use the equivalent negative numbers, as well as reverse the x and z? For example: 100, 190 or 190, 100 but also -100, -190 or -190, -100.
So when I try to reset the pie nothing happens and when I'm at 2 chunk I just see the same things. I turn it off and on as you said but it doesn't work.
I have one problem with the piedar for fortress: my block entities has no chests, and even if there is a fortress near no mob spawners pop up. Is this a problem that everyone has as well?
How do I not get false positives like if I was in a treasure bastion, the pie chart will lead me to the cube of the treasure bastion which has mob spawner??
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
@xQc message me on twitter if you have questions about anything FeelsOkayMan :thumbs_up:
I hope that Pepega watches this video.
SORRY FOR MY JUICER xqcL
Hopefully he watch this dam video so he can beat Foreskin XQCL
Hopefully he watches this it’s painful to watch without these strats Sadge
Dude ur amazing
"You're not allowed to do math in the middle of the run"
Little do they know I'm adding 2+2 in my head when speedrunning
but can we do the Bastion X-ray and the Fortress one?
I just wonder, is it really allowed to calculate anything during the run, even without calculator. Doesn’t it allowed right?
Who know this just reply to me.
@@zulithern I think it is allowed lots of speedrunners do e-raying and stronghold triangulation
@@fxt3mc calculators arent, but the triangulation one has a chart which i think they pull up on a phone, plus they can do the math in their heads
@@flealgaming This is outdated. Calculators are no longer banned as of August 24th.
I’ve been grinding seeds as an amateur speed runner, without really having the skill or methods to complete a run quickly. Videos like these always help out, so thank you.
Wanna add more things :
- You can use shift f3 to search for bells at spawn, it'll tell you there is a village nearby, also is there is a furnace there is a weaponsmith (not on taiga villages).
- In the nether, on the before last line, you can see two numbers : M and C. M stands for dispawnable aggressive mobs and C for dispawnable neutral creatures, but we know that the piglins in bastions are mobs that cant dispawn. So then you need to add up those two numbers, and substract the second E number, every slice of 30 entities is a bastion, so you can know if there is one or more bastions around you at spawn if you did not looked right after teleporting.
also, if you don't get a multiple of 30 after subtraction, it could mean that the bastion is half loaded, i.e. your render distance only renders half the bastion, so you can increase your render distance by a bit to confirm that it is a bastion
he has made videos on finding bastions using that method
My brain: *melts*
Bridge has only 20 entities and stables has a quite a lot so the difference can be more or less than 30 as long as there’s a decent gap between e and m+c then you have a bastion(s)
@@TesticleScratcher чел...
I am not interesting in speedrunning but the high level tactics used for them are really nice to know for general min/max gameplay. As someone with 0 speed running experience, this guide was honestly incredibly easy to follow!!
I love how your chat is rinsing you as you record.
Nice vid
the chunk border strat for knowing where to go for fortress is vey poggers, great job as always mr k4 👍
THANK YOU WE NEEDED A VIDEO LIKE THIS
Hi z
Happy belated birthday z
thank you Okayge
Hi xqc If he ever stops being stubborn and tries to learn a thing or two
WHOMEGALUL
More uses:
If you see bells on the pie chart in the overworld, there's a village
If there's a furnace and brewing stand but no bell, there's an igloo with a basement
If there's a chest in the end, there's an end city
Also, when you see "blockentities", right below it is usually "tick" (sometimes it will say "regular" above it instead), and if you use this, you can see all loaded entities.
nice video ! BUT i tried for the fortress and in my pie chart I don't see "minecraft spawner" it is not workin :( I tried with a fortress by placing me at 4 chunks of the spawner and when i increase my render distance to 4 there isn't any changes... why ?
I have that problem too
you have to go all the way back in the pie chart menu with "0" until you can reselect everything
@@884tomato omfg thank youu bro you are the only one who actually gave me a solution
thank you k4, this is very helpful
In Minecraft 1.21 if you have Render Distance set to 2 chunks it renders 4 chunks in total which 2 chunks it renders on the monitor (where the first chunk is always the chunk where the player is located) + 2 pre-rendered chunks just to know exactly how far away the mob spawner is. Also the Render Distance affects only the horizontal chunks the vertical ones are rendered but not seen on the monitor more than 2 in infinite number of times.
i will link this too all the beginners ty
when I press tick level enterties block enterties it just goes to a 100% green pie chart that says unspecified
no spawners near
KEKW
sorry chat told me to comment that
"this is the sixteenth take youtube" LMAO great tutorial bro
WR PACE POGGERS I WAS HER- oh wait wrong chat
I was having trouble because I didn’t reset back to 2 render distance. Thanks so much
THANK YOU BRO MAY GOD BLESS YOU❤
Chat was the best part in this video lmao
Best video, finally someone who actually knows hot to do it. (I just came for how to turn on that pie) BUT STILL GOOD
great tutorial! very helpful
Thank you so much all the other videos that say how to find a fortress are just like ... Um... Find it...
You actually gave a stratt thx so much
This whole video blew my mind. Who the hell found all this stuff?
There is a guy Matthew Bolan with a lot of free time
The chat was inspirational.
I thought there was no way you can find the fortress other than quadrants, and this video was so helpful! ty
yeah the quadrants way is bs its not very helpful
I'm sorry but... The chat is hilarious
damn i remember when we used to just mine gold using stone pick and trade for piglin and we hate bastions
yeah lol
truee
back then dream , illumina , benex were the only top runners ... missed the days of 1.14
I'm having this thing on 1.16.1 when I F3+F until I get the spawner in my pie chart (for example at 12), but if I decrease the render distance only by 1 (to 11), it does not go away. For it to go away I have to decrease it all the way back to 2 and then up it incrementally (to 11) to test for the direction. Is this normal or is it some kind of bug?
u gotta go down to 2 and then up to 11
thant u man. this will help me very much!
i use pie chart but it always says there is a spawner and chest no matter my render distance or where i am
probably changed in 1 19, because nobody speedruns 1 17+... i tried this thing in 1 20, and nothing worked too. even F3 + F was removed in 1 19 snapshot
Why cant i refresh my pie ( I have to quit the world and go back to and that the only way to refresh ), and i cant add my render distance Bu pressing F3+F (i have to add it manually), please i need answer
you need to play 1.16
is it only me or does the spawner trick not work on 1.17 snapshots? Is there maybe another way of reloading the shift + F3 menu?
it doesn't work on full 1.17 neither
Hey , whenever I open my piechart(2 chunks distance),spawner one always appears.mayne it's a glitch in Minecraft cracked version but high chances are that it's my fault.
Can anybody help me?I am an old Minecraft player yet a new speedrunner
let me know if you ever figured it out because i’m having the sam problem
this feels illegal to know lol
yep
What about a cheat sheet to calculate how far the strong hold is using the angles (how much the angle changes by)
im p sure thats allowed cuz divine travel is allowed and divine travel is like the most stupidly OP thing ever assuming you can do it, but double check anyways
that’s awesome!
These kinds of vids are the best bc nobody is posting them
Chat is malding during one of the best tutorials for this I've seen
"At 16 the spawner has loaded in..."
Im sorry but my i3 7thgen will catch fire when I turn it up to 10 or more
Dude the chat LMFAO
the chat just gets me every time
thanks this helped alot
trying to learn this for streaming- maybe I should learn how to just play first lol
Meh I learned more from cfy fun facts
Hopefully that pepega watches this
But what if your chat is doing math for you? :tf:
what if reopening the f3 doesn't refresh the pie chart?
did you ever figure it out? i’m having the same problem
the pie chart still loads 6 chunks when you set the render at 2 because of the 4 chunks cap the pie chart has for some reason, so you're likely to have a spawner within 6 chunks and the pie chart is just looking like not having refreshed.
when i click video settings it doesn't look like that for me? i followed all the steps in your multimc install thing
But what if u spawn in front of a fortress and go to it first !??!?!
What key/number shows the piechart that has spawners on it? I have cycled through all of them but I cannot find it.
Hes not gonna watch it chat the adhd is too strong FeelsBadMan
AINTNOWAY I USED THIS TUTORIAL MID SPEEDRUN, I TRIED THE FORTRESS THING WALKED 30 MINUTES STRAITGH TO SOUTH BECAUSE IT SHOWS A SPAWNER, NOTHING. WENT IN CREATIVE WAS THE NEAREST FOTRESS THE OTHER WAY AINTNOWAY BROTHER
there is no mob spawner in shift+f3, even, if i teleport to a fortress
how to blind travel in 1 sentence:
add your x and z coordinates to a number between 250 and 300. bam, ez blind travel (ignore the negative sign if the number is negative)
for example: if im at -100, 170, thats really good blind travel coords because i only take the numbers and ignore the negative. so that wouyld be 100+170=270, and 270 is between 250 and 300.
When you study Minecraft more than studies :
XQC waiting room ResidentSleeper
0:16 Hi twitch
When u study minecraft more than school 😂
nice content very pog
This was so helpful, tysm!
Op in the chat bois
2:00 idk what you mean with tick
Whenever i use fabric mode with sodium my entities count never work as expected, when i use vanilla it's fine, going to fabric even when i'm looking in the direction of the bastion i get a low count.
I have my entity render distance 500% and i think every other option is good.
It sucks speedrunning in vanilla tbh : (
you need to have entity culling disabled, it's in the third tab in sodium's options. Also if you downloaded sodium like 4 months ago you need to update it for this to work.
Turn off entity culling in your settings on sodium
Where does it say if the spawner loads in or not?
THANK YOU SO MUCH NOW I CAN SPEEDRUN (I've already been practicing speedruning for a couple of months)
lmao I was so confused as I tried this out in a random survival world, but it was just the seed that got me 2 bastions in 3 chunks - the seed: -7010268609620231452
what button do i need to press???
what the fuck button is "tick"?
tick + level + entities + block entities
Found a fortress 2 minutes after opening this video
lmao your chat
lmao "which is not many of you watching" real
what if my render distance is at 2 but there is still a spawner in my area?
the same happens to me, did you ever finds fix?
Him : Streaming and trying to help
His chat : "Dislike video" "UA-cam ,go play fortnight" "never ending stream"
And the massage goes on dada dada dum
Dritto a sinistra
Thank you I always wondered how people turned on the chunk borders and got the pie chart
I need help on fortress finding, I put my render distance to 2 and refreshed the pie, but the spawner wont go away, so I tried going quite far away and doing the same thing, but the spawner and chest will not go away from the pie. Is there like 20 different spawners each chunks??
same thing happens to me so i can’t use the strat. did you ever find out what to do to fix it??
U HAVE TO exit u r world and comeback
@@issac_brownzz6394 it´s tiredsome but it works! thanks
Because strongholds spawn in a ring, can't you also use the equivalent negative numbers, as well as reverse the x and z? For example: 100, 190 or 190, 100 but also -100, -190 or -190, -100.
yes
Here from sam dao
it always say there is a spawner even in two chunks when there is no spawner pls help
refresh it by pressing shift f3 again
thanks
it doesn't want to refresh
Here from XQC's livestream. ✌️
Did he watch this video?
@@ameerdahbour8794 He sure did!
@@TheMrHugoHappy Do you know which stream it was?
Does this work for 1.19
Yes
can we have the tfue analysis video back Sadge
too many toxic kids
@@k4yfour can you upload it privately somewhere? I only got to read the comments as I was at school and wasnt going to watch it muted
So when I try to reset the pie nothing happens and when I'm at 2 chunk I just see the same things. I turn it off and on as you said but it doesn't work.
How to change this graph, beaucse you say that is controlling by numbers, but i m clicking and nothing
Did you figure it out?
press the numbers on your keyboard
Can we locate overworld spawners by the pie chart method?
yes
4:55 "putting render distance back to normal" -puts it to 20 chunck
Me: look at my pc
My pc: don't even think about it
This is so sick lol
How do u see when the spawner loads in?
That's smart! thx!
This is so advance for me
Wr pace
Me: Trying to concertrate on the video
The live chat: YOO BRO LOOK AT US
I have one problem with the piedar for fortress: my block entities has no chests, and even if there is a fortress near no mob spawners pop up. Is this a problem that everyone has as well?
@KlownzHDX no
Vanilla
How do I not get false positives like if I was in a treasure bastion, the pie chart will lead me to the cube of the treasure bastion which has mob spawner??
Hi Twitch!!!
I'm trying to concentrate on the video but chat keeps making me laugh.