Lowering a Chevy OBS 1500 7" w/ Western Chassis C-Notch, Flip Kit, Shocks & Lowering Shackles 1 of 2
Вставка
- Опубліковано 2 лип 2024
- In this 2 part series, we'll show you how we lowered our 1992 Chevy C/K 1500 OBS using Western Chassis C-Notch Kit, Flip Kit, Rear Shocks, Extenders, and Shackles.
In part 1, we drop the rear 7" with the following parts from WesternChassis.com/
C-Notch Kit: westernchassis.com/1988-98-Ch...
Rear Shock Extender: westernchassis.com/88-98-Chev...
Rear Shocks: westernchassis.com/DS-2-Rear-...
Rear Flip Kit: westernchassis.com/1988-98-ch...
Extended Shackles: westernchassis.com/Rear-Exten...
I recommend having a beer or a bowl, whatever your preference is, after you drill the holes..
I prefer a beer and blunt🤷🏻♂️
I remember the good ole days working at traders and having competitions seeing who could get these done the fastest.
VERY well explained video. great job
Hola felicidades esta muy bien esplicado yo lo hecho varias veces y ya me se el trabajo GRACIAS saludos desde Ensenada B.C MEXICO
Tengo una camioneta de doble rodado del mismo año mi pregunta es si le que queda el mismo kit q los sencilllas
I remember when I was working at western back when it was in fresno
I just ordered from your website !
Exactly what my baby looks like.
No need to disconnect the drive shaft from rear end,correct?im currently in the middle of installing a flip kit and kinda having a hard time as it is my first time.
Have yall done a step side 1995 silverado
Should of welded the c notch
Why would you make the frame notch so high you can't fit wire loom in there. A quarter inch less of clearance isn't going to hurt anything
As much clearance as possible is better than not enough. Especially if you still use it as a truck
👍
I have a question not sure if anyone can answer, I lowered my truck but my drive train is not straight does anyone know how to make it straight ?
Is it to low drive everyday. I'm thinking about doing the same to mine but it's my daily driver
Depends on your roads, I live in so cal and ours arent terrible considering the amount of traffic, I could drive mine everyday if I wanted to.
Do a squarebody drop
Nice wheels. What brand and size? Also tire specs?
There US MAGS C10s or U129s i got the same wheels. Mine are 22x8.5 front 22x10.5 rear. Look at this video
ua-cam.com/video/9p3CUKtqu2g/v-deo.html
Where you guys are located ?
what rims are those
I did a flip kit on my 96 ext cab truck. 5.inches in the rear without a notch but it bumps bad. What can I add to go up another inch?
Replace your shackles with one inch lift shackles and you’re good!
@@lreverxnce 1 inch on a flip kit would drop it another inch.
@@atxjax1 it’s not a flip kit? It’s the shackles, there’s 2 inch drop shackles and 1 inch lift shackles so that’s your go to... you welcome
@@lreverxnce on a flip kit the smaller the shackle is the more lift it will get. Spring end toward the ground. If I go spring up upwards toward the bed it will lower it more. Im already using a 1 inch shackle. My only other alternative would be to get a half inch shackle like the Belltech 6404
@@atxjax1 then you’d get the oem ones back on with some lowering shocks and extenders you won’t hit again
Where’s part.2. ??
What about the drive shaft it doenst affect it
the reason the new ubolt plate has that offset hole is so it lines up your axle rearward to account for the new driveshaft angle
@@dalton-at-work do have any pics of how the new angle should be
@@albertybarra7968 in general the imput and outputs should be parralel.... but all the brand name flip kit brackets should line it up for you
@@dalton-at-work no need to disconnect the drive shaft from the rear end,correct?im currently in the middle of a flip kit/c notch install and having first timer issues.
My only gripe is not wrapping the wires in electrical tape. Or shrink tubing if possible.
are you really suggesting customers remove wiring loom and push it into a crevice where its guaranteed to corrode, get road debris etc? Sorry, but they are better off zip tying the wiring harness to the brake line etc. thats really lousy advice, especially for a 25 year old truck