✨DUET DRYER - Awful Noise - EASY DIY FIX ✨

Поділитися
Вставка
  • Опубліковано 30 чер 2020
  • ✨DUET DRYER - Awful Noise - EASY DIY FIX ✨
    EASY WAY TO REPLACE A SCREECHING IDLER WHEEL THROUGH THE LOWER PANEL
    CLICK HERE TO ORDER A NEW IDLER WHEEL: amzn.to/3f0VkYO
    Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
    *** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com" Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
    PLEASE HELP TO KEEP THIS SERVICE GOING
    THANKS SO MUCH😀
    www.paypal.com/cgi-bin/webscr...
    Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
    CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
    Check Out Scott’s over 600 Appliance Repair Videos:
    / @scottthefixitguychannel
    IF MY ADVICE HAS HELPED YOU...
    PLEASE CLICK HERE TO DONATE
    www.paypal.com/cgi-bin/webscr...
    Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
    Check Out Scott’s over 600 Appliance Repair Videos:
    / scottthefi. .
    *** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com
    CLICK HERE TO TRY AMAZON PRIME FOR FREE FOR 30 DAYS: amzn.to/2Nx7dKq GET YOUR DELIVERIES FOR FREE 😊 Click Here ToJoin Our Channel Membership and Receive Great Perks: / @quickandeasy5minuteap...
    NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/scottthefixitguy
    CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
    USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
    .
    CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
    USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
    .
    DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
    Scott The Fix-It Guy I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
    Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
    ***
    Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu
  • Навчання та стиль

КОМЕНТАРІ • 46

  • @mom-and-son
    @mom-and-son Рік тому +6

    Thank you for making the sound first so I could hear if I was having the same issue

  • @tjmort26
    @tjmort26 3 роки тому +1

    Great video! Ours was doing the same thing. I just need it to last another another 2 months so I sprayed the wheel with a silicone spray and squeak gone. 👍👍😁 your video pointed me in right direction. Thanks!!

  • @reginapetty2042
    @reginapetty2042 Рік тому +1

    Thank you! You helped me fix my dryer today. 😀

  • @nreske67
    @nreske67 3 роки тому +2

    That worked well! Even found a service guy around the corner with parts! Took me about two hours and cost $13! Thanks so much. Great video

  • @mugosakelvin9322
    @mugosakelvin9322 3 роки тому +1

    Nice

  • @joegrycowski211
    @joegrycowski211 3 роки тому +3

    Awesome video. Was not my issue in the end, but the way you took the bottom front panel off and spun the drum allowed me to diagnose mine super easy. The bottom roller is completely shot!!! Good advice to do that to see/hear where the noise is coming from!!

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  3 роки тому

      Thanks so much Joe👍

    • @dianec6290
      @dianec6290 Рік тому

      What part did you end up getting?

    • @dianec6290
      @dianec6290 Рік тому

      @@QuickAndEasy5MinuteAppliance Do you have a link for just the rollers
      ? Thank you for the video.

  • @umn_evanp
    @umn_evanp 2 роки тому +7

    this was very helpful. I lubed it once and the squeak came back within a couple months. So, I replaced the wheel. Easy peasy. You don't even have to remove that second silver shield if you are a little dexterous :)

  • @scottcooper812
    @scottcooper812 3 роки тому +5

    Thank you..I sprayed a little WD 40 on the the pulley wheel bearings and fixed. I’m sure it’s a temporary remedy but wet laundry is no bueno

  • @heatherpearl5510
    @heatherpearl5510 2 роки тому +1

    Worked for me! (at least I think so.) The only thing I had to look on another video for was to see pulley path. I didn't need to take lint holder thing off to reach it. But then I took it off anyways to clean it. Thanks for the video.

  • @donhite6246
    @donhite6246 Рік тому +3

    Thanks for video. I sprayed a little lithium grease on the idler pulley and the squeak is gone. Another use for lithium grease. I use it like Frank’s Red Hot!

  • @dcpools5870
    @dcpools5870 7 місяців тому +1

    Looks real easy boat five minute job

  • @dianec6290
    @dianec6290 Рік тому +1

    I would have assumed that awful shrill sound was going to be the belt, but I ordered the part on Amazon, using your link. Hopefully, that is all that it is. Thank you!

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  Рік тому +1

      Did it work?🙏😊

    • @dianec6290
      @dianec6290 Рік тому

      @@QuickAndEasy5MinuteAppliance Still waiting for the part, but I vacuumed it out and lubed it. Super quiet and moving smooth. I am sure I will have to put the part on soon, but for now, I will wait until it starts screaming again. Thank you for the video.

  • @larryrobinson08
    @larryrobinson08 2 роки тому +2

    Diving into the unknown always gets my adrenaline pumping. Watching your video helped a lot. I found that all I had to remove was the bottom cover. I could reach in with both hands and comfortably touch the idler pulley. I cut a piece of 1x2 41/4” long and placed it between the vent pipe and the idler bearing shaft/bracket, this removed the pressure on the belt. Then it was easy to remove and replace idle bearing. When I removed the1x2, I made sure the belt was in the right place. Put the cover back on. I was interrupted a couple of times while making my repairs, so I would guess it took less than 10min.

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  2 роки тому

      Wow,
      Nice job Larry😊👍

    • @trueamerican7034
      @trueamerican7034 2 роки тому

      This looks ok if machines are stacked, my washer and dryer are side by side on pedestals in small laundry room with tub. Gonna try, don't know. Used to grease them all the time. Older models that top and front came off to access.

    • @larryrobinson08
      @larryrobinson08 2 роки тому +1

      @@trueamerican7034 my machines were side by side, on pedestals. Piece of cake sitting on my ass reaching in and gittin er dun!
      But I agree if the unit was sitting on the floor, it may require a contortionist!

    • @trueamerican7034
      @trueamerican7034 2 роки тому

      @@larryrobinson08 Thank you

    • @dianec6290
      @dianec6290 Рік тому +1

      @@larryrobinson08 Lol. Overall, this dryer has been great, so I definitely want to fix it. Guess I'll be sitting on my ass too. ;-)

  • @e2xlio2xt
    @e2xlio2xt 3 роки тому +2

    Thanks for the video! I just lubed up the idler and the squeaking went away.

  • @StefanUrkel
    @StefanUrkel Рік тому

    I have the wgd9150w00 dryer. Ordered a replacement idler pulley from Amazon but it is larger diameter than the original. Also read squealing returned for some after 1 year. Where can I get Original whirlpool quality idler pulley for this model that is an exact match or a better quality one for cheap?

    • @StefanUrkel
      @StefanUrkel Рік тому

      Forgot it is whirlpool part # 279640

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  Рік тому +1

      Can you try this one: www.walmart.com/ip/HQRP-Dryer-Idler-Pulley-Wheel-Roller-Replacement-Whirlpool-Kenmore-Maytag-KitchenAid-279640-WP279640-AP3094197-PS334244-W10837240-AP5988716-PS1172633/661094246

  • @virgildensler2489
    @virgildensler2489 2 роки тому

    How do I take the whole front panel off?

  • @dorothyandrews8872
    @dorothyandrews8872 3 роки тому +1

    I have a duet dryer suddenly it started making a noise. When we pulled it out from the wall we found the pipe that goes outside was wobbly and that was making the noise. Is there something inside that was holding it still ? If so how do we fix it, for now we have just pushed some foam around the pipe

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  3 роки тому

      Can you send a video of that to : scottthefixitguy@yahoo.com

    • @dorothyandrews8872
      @dorothyandrews8872 3 роки тому +1

      @@QuickAndEasy5MinuteAppliance Thanks I will, I have to wait untl someone can pull the dryer out for me as I am senior.

  • @valpro99
    @valpro99 3 роки тому +1

    Can you get to everything from the back or only from the front. I hear the noise too so I'm sure it's just the wheel.

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  3 роки тому

      Got to go from the front👍

    • @atlmtnbiker
      @atlmtnbiker 10 місяців тому +1

      If you UA-cam search Whirlpool duet squeaking there's a video of a guy going in from the back.

  • @laurasscorpio4061
    @laurasscorpio4061 3 роки тому +1

    Mine was making that noise for awhile, then it changed, then it just stopped. Now it won't start. help.

    • @QuickAndEasy5MinuteAppliance
      @QuickAndEasy5MinuteAppliance  3 роки тому

      Can you spin the drum be hand?

    • @michaelfowler8100
      @michaelfowler8100 2 роки тому

      Mine was making that same noise and a couple days later it stopped completely working. I can spin it by hand and it don't make a noise but it want start.