That suspension bar you are referring to, is part of the efforts to make the vehicle stable on the move and less (jarring for lack of a better term). The first road wheel is a essentially a motorcycle shock absorber, the second road wheel, a semi elliptic spring (yay railway designers) the idler the same as the second (Ausf. A only and inverse). First road wheel hits ground level obstacle, rides up and the shock absorber takes the brunt of the impact. Second road wheel hits, the spring takes the load (no torsion bars) and then delivers the excess absorbed energy to the idler which lifts up as a cantilever thus absorbing even more of the impact energy. If you notice that between the Ausf. A and B the idler on the B is much higher. But as they added another road wheel after lengthening the hull, the connection was transferred to the last road wheel and not the idler to do the same job. Not as successful, as the weight of the final road wheel and idler were significantly different and the load absorption was less.
I Look forward to see your video's. I live in the west Midlands in the UK! The video's are normally aired on UA-cam around 9Am here. I wish I could come to see your museum! even though I have family in Australia my health would restrict me coming there. I've been to Bovington tank museum in Dorset many time and I enjoy going there all he time. I've said it to you many time that your team are talented with what they know and do! thats one of the reasons why I keep watching as well. As my grand father was a tank commander in WW2 ( 4th london yeomanry - sharpshooters!thats one of the reasons what started in into them.I have his war records and it amazes me what he did and was up against and went through. I'm Ken and ill See you next Wednesday LOL.
Thanks again Team, for another brilliant Workshop Wednesday. And well done to Eaman for working seamlessly with the team. As you know, I love Workshop Wednesday and wait with barely held anticipation. I finish the dinner wash up and race down the hallway to my man cave to watch. And I know I could watch it at my leisure as it's on UA-cam. But I feel you deserve my immediate attention as you have put so much effort into the production. Cheers
The hydraulic drive with roller chain final drives is very elegant, imo. No steering gear worries and to change the final drive ratio is relatively simple.
This is possibly my favourite project in a while. Sure it's a crappy Pzr 1 but making it into a little runner with a mix of old and new parts is a great journey to follow. Hoping we get the early war 2 tone scheme of grey and brown. Haven't seen one restored like that. Mostly just solid grey.
Some great basic and solid engineering there guys. And the attention to detail always pays off. Forgive me repeating my little mantra but these videos should be required viewing at secondary schools to show kids why we need engineering, how creative it actually is and what a great career it can be. We really do not need 'Social Media' experts. We need skilled craftsmen and women.
Huge thanks to Eamon for great filming and editing !. Watching fabricating PANZER I parts reminds me of my model making of Stg3 G just started this week. 😄
A bit of advice, Always tighten the nut, not the bolt unless you can't reach the nut. Why? There is resistance in the bolt being passed through the brackets that require higher torque values. The example to this is tighten the bolt to the required torque then tighten the nut to the required torque. You will find that after tightening the bolt, the nut is still not to torque specs and will turn until it is to torque specs. When you must tighten a bolt that is threaded into a piece the torque value of the body resistance has usually already been calculated by the manufacturer to be slightly higher than normal.
Never fail to be amazed that a picture can provide such little detail as to a bracket that cannot be seen in any other picture can then be cut, machined, drilled, welded and then (as if by magic) be attached to the hull (and not just the Panzer I either)...well done guys, and young Eamon too.
Although there is a balance between lack of tension causing chain slap and tightness causing stress on bearings and the finished article is not going to have the amount of use it was designed for, the chains seem a bit tight. In addition, there is no cushioning in the drive between the hydraulic motor and the tracks. I think this may cause problems and the last thing you want is a chain flying apart in such an enclosed space. I suggest a simple, spring-loaded chain tensioner might be the answer. As the chain will run in both directions, you would probably need one on the top run and one on the bottom run. You may also want to give some consideration to chain lubrication and enclosure. Tinplate will not be adequate for the latter.
What a place to do work experience! While I can see the tiny difference, mostly in close ups, you can also see the amount of shots piled up and imagine the amount of work editing it. Top job by everyone as usual and kudos for letting Eamon loose on your production and him maintaining the standard 👍🏻
I want to give a shout out to the young man mentioned in this presentation, that films and edits your videos, as being an outstanding addition to the team and that he does an excellent and proffesional job! KUDOS!
Props to Eamon add Aus Armour legend to your CV. Great job! I think it should be obligatory guests should introduce the video as it's great to see new generations getting involved! Great work by the whole team and lovely to see the baton being passed on.
You all really need to make more videos to watch. I never thought a week could last so long. Good job as always. Thanks for sharing this great historical preservation with the world.
Another great video job by Kurt and his video technician Amon( sorry if spelled incorrectly!) keep up the great work and to all the people doing all that great restoration work on all your military hardware!
It`s so nice to see it come together. Very good idea with the hydraulic orbital motors for driving it, fast and easy solution without any complex gears.
The attention to authenticity is impressive. This is The *A* Team. 🙂 EDIT: Good to listen to a Yorkshire voice (Jonno). ''Ey up lad''! Greetings from a North Yorkshire original.
Many thanks from the USA for sharing another great video of what you all do Down Under, Makes me wish I could come down to see all of this in person. Take care and keep these videos coming. Special Shout out to Jessie and Derrell good day Mates.
Very cool stuff here. Interesting, engaging content, technical without being overwhelming. Nice clear photography and editing. Definitely top of the game here. Thanks for all you do restoring these pieces of history.
If it was me I would put the engine hold-down bolts in from the bottom and have nuts/washers on top of the engine bearers, that way if anything comes loose you'll be able to see it, the way it is now a nut could come loose and even drop off - also, they might get rusted on under there. Regarding links in chain, with a joining link it is good practice to have the closed end of it pointing in the direction of travel, probably can't be done here because of the requirements but I'd recommend arranging it so that the most common drive use has the closed end going in the direction of rotation.
That suspension bar you are referring to, is part of the efforts to make the vehicle stable on the move and less (jarring for lack of a better term). The first road wheel is a essentially a motorcycle shock absorber, the second road wheel, a semi elliptic spring (yay railway designers) the idler the same as the second (Ausf. A only and inverse). First road wheel hits ground level obstacle, rides up and the shock absorber takes the brunt of the impact. Second road wheel hits, the spring takes the load (no torsion bars) and then delivers the excess absorbed energy to the idler which lifts up as a cantilever thus absorbing even more of the impact energy. If you notice that between the Ausf. A and B the idler on the B is much higher. But as they added another road wheel after lengthening the hull, the connection was transferred to the last road wheel and not the idler to do the same job. Not as successful, as the weight of the final road wheel and idler were significantly different and the load absorption was less.
That's awesome thank you for sharing!
Yes, reminds me of compensating suspension on a steam locomotive.
Well done guys! Compliments to Eamon for blending in seamlessly!
" just been servicing the Sherman Firefly " .... where else will you hear that phrase? Amazing stuff.
I Look forward to see your video's. I live in the west Midlands in the UK! The video's are normally aired on UA-cam around 9Am here. I wish I could come to see your museum! even though I have family in Australia my health would restrict me coming there. I've been to Bovington tank museum in Dorset many time and I enjoy going there all he time. I've said it to you many time that your team are talented with what they know and do! thats one of the reasons why I keep watching as well. As my grand father was a tank commander in WW2 ( 4th london yeomanry - sharpshooters!thats one of the reasons what started in into them.I have his war records and it amazes me what he did and was up against and went through. I'm Ken and ill See you next Wednesday LOL.
G'day Ken
@@ray.shoesmith G' day Ray
Well done Eamon.... you did a great job of editing this week. Keep it up mate.
This tank is going to look brilliant when it's finished.
Good on ya Eamon. Nice job mate.
Jono’s explanation of the wheel’s parts and assembly was excellent.
Thanks again Team, for another brilliant Workshop Wednesday. And well done to Eaman for working seamlessly with the team. As you know, I love Workshop Wednesday and wait with barely held anticipation. I finish the dinner wash up and race down the hallway to my man cave to watch. And I know I could watch it at my leisure as it's on UA-cam. But I feel you deserve my immediate attention as you have put so much effort into the production. Cheers
The way that Firefly just started up and sounded is just the best.
Short but perfectly formed video this week. A bit like a Panzer 1. Looking forward to the next one.
Incredible craftsmanship from the boys as always! They never cease to amaze and impress with their skills.
I hope Al is OK and we see him back at work soon!
well done to the young fella
Love your channel
The hydraulic drive with roller chain final drives is very elegant, imo. No steering gear worries and to change the final drive ratio is relatively simple.
Workshop Wednesday and money pit, Wednesday is my FAVOURITE
YAY! It's Wednesday!
This is possibly my favourite project in a while. Sure it's a crappy Pzr 1 but making it into a little runner with a mix of old and new parts is a great journey to follow. Hoping we get the early war 2 tone scheme of grey and brown. Haven't seen one restored like that. Mostly just solid grey.
Some great basic and solid engineering there guys. And the attention to detail always pays off.
Forgive me repeating my little mantra but these videos should be required viewing at secondary schools to show kids why we need engineering, how creative it actually is and what a great career it can be. We really do not need 'Social Media' experts. We need skilled craftsmen and women.
Yippee my weekly fix👌
Kudos to your organization for having an on the job process allowing the future generation of workers to get invaluable experience. Well done.
Great stuff, as always. I'm eager to see the rest of the hydraulic power setup soon.
Amazing engineering and sympathy for the original historical design. The whole team does a tremendous job!
It would be great to see the process of preping and painting the hull/tank
Huge thanks to Eamon for great filming and editing !. Watching fabricating PANZER I parts reminds me of my model making of Stg3 G just started this week. 😄
Enjoying this series. Love your work, AusArmour. 👍
Excellent episode! But then, they all are! Thanks🙂.
Great job, Eamon. 👍
A bit of advice, Always tighten the nut, not the bolt unless you can't reach the nut. Why? There is resistance in the bolt being passed through the brackets that require higher torque values. The example to this is tighten the bolt to the required torque then tighten the nut to the required torque. You will find that after tightening the bolt, the nut is still not to torque specs and will turn until it is to torque specs. When you must tighten a bolt that is threaded into a piece the torque value of the body resistance has usually already been calculated by the manufacturer to be slightly higher than normal.
日本からいつも興味深く拝見しております。一度日本からオーストラリアのそちらのミュージアムに見学のためお邪魔したいのですが、言葉の壁もあり躊躇しております。
これからも色々な動画をアップして頂きますよう、お願いいたします。😄
Waited all day for this!
Like a giant RC tank with chain drive. I use chain on 1/6 scratch build models. Should work well, cheap and easy maintenance.
What a great job eamon did
It is a very small tank
The guys are doing a great job 👍👍
Never fail to be amazed that a picture can provide such little detail as to a bracket that cannot be seen in any other picture can then be cut, machined, drilled, welded and then (as if by magic) be attached to the hull (and not just the Panzer I either)...well done guys, and young Eamon too.
The best day of every week is Wednesday when The Australian Armour & Artillery Museum posts another excellent video!
Always Glad to see a Raptors cap instead of a Leaf's one!
Another great update,
Although there is a balance between lack of tension causing chain slap and tightness causing stress on bearings and the finished article is not going to have the amount of use it was designed for, the chains seem a bit tight. In addition, there is no cushioning in the drive between the hydraulic motor and the tracks. I think this may cause problems and the last thing you want is a chain flying apart in such an enclosed space. I suggest a simple, spring-loaded chain tensioner might be the answer. As the chain will run in both directions, you would probably need one on the top run and one on the bottom run. You may also want to give some consideration to chain lubrication and enclosure. Tinplate will not be adequate for the latter.
Another great update Kurt, thank you and well done to Jess for their skill and ingenuity. Great job!
I wanna go to Australia 🇦🇺 for armor fest definitely worth the 18 hour flight
Cairns, and this museum , are well worth a visit. Would love to go back myself for Armourfest
What a place to do work experience! While I can see the tiny difference, mostly in close ups, you can also see the amount of shots piled up and imagine the amount of work editing it. Top job by everyone as usual and kudos for letting Eamon loose on your production and him maintaining the standard 👍🏻
Love these, and it's so interesting to see the 'cheats' to get a piece of history working.
I think the video quality is better than usual 😂😂. Great work as always
I want to give a shout out to the young man mentioned in this presentation, that films and edits your videos, as being an outstanding addition to the team and that he does an excellent and proffesional job! KUDOS!
The Panzer 1 is currently my favourite restoration project.
top job guys. 👍👍👍👍👍👍
great job, interesting drive unit , nice to see the split links facing the correct way for forward drive .
Amazing that such small hydraulic motors will move that tank.
Props to Eamon add Aus Armour legend to your CV. Great job! I think it should be obligatory guests should introduce the video as it's great to see new generations getting involved! Great work by the whole team and lovely to see the baton being passed on.
Love the videos guys keep them coming!
Top tier craftmanship.
My Wednesday ritual, a cup of coffee a time tam or two and Workshop Wednesday...
Awesome as always, love the innovation, and common sense to bring this old warhorse back to life.
🏆🎖️🙏🤗
Thank you for sharing this
I look forward to my WorkShop Wednesday fix each week…..hello from British Columbia, Canada!
Often hear of American Ingenuity, but your team shows Aussi Know-how, innovation and "can do" spirit that is not found elsewhere !
Great stuff guys, I look forward to watching Workshop Wednesday every week.
Great update Kurt! The Mk I original parts fitting is a testament to the teams hours of hard work! Looking forward to next weeks episode!
Good job Eamon, I hope you had fun working with the guys!
You certainly will Kurt! Thanks to you and the team ...keep it up...
You all really need to make more videos to watch. I never thought a week could last so long. Good job as always. Thanks for sharing this great historical preservation with the world.
this is going to be the most reliable panzer ever.
You guys continue to amaze me with your work, thank you.
This entire team is top notch craftsmanship.
Going to be an exciting video next week. Look forward to fix it Friday with Steve.
The hydraulic drive system is very cool. Can't wait to see it in operation!
Thank you for the great work that all of you do at the workshop
Watching this from the UK,well done guys you are doing a cracking job,can,t wait for the next episode.
Eamon, you did a bloody good job. Well done son.
I do like me a Work Experience Wednesday.. nice work Eamon!
Another excellent job.cant wait to see it assembled and roaring round the track
Another great video job by Kurt and his video technician Amon( sorry if spelled incorrectly!) keep up the great work and to all the people doing all that great restoration work on all your military hardware!
Had a chuckle at Daryl laying in the swarf and the padded workshop creeper was in the same shot 😂👍👍
Great content! Thx
It`s so nice to see it come together. Very good idea with the hydraulic orbital motors for driving it, fast and easy solution without any complex gears.
The attention to authenticity is impressive. This is The *A* Team. 🙂 EDIT: Good to listen to a Yorkshire voice (Jonno). ''Ey up lad''! Greetings from a North Yorkshire original.
As always, I absolutely love this channel! The attention to detail, and just all around safe and knowledgeable environment is inspiring.
Always anticipating the next installment.
Such a beauty it is starting to get. Great work on that tank. 👍
Some of the best vids on the ole inter webs
Many thanks from the USA for sharing another great video of what you all do Down Under, Makes me wish I could come down to see all of this in person. Take care and keep these videos coming. Special Shout out to Jessie and Derrell good day Mates.
As usual, the boys done good!!! I am amazed that they can work miracle's from just photos. All the best from UK.
What a treat to watch.
Thank you guys, great update 👍👍👍
Great effort, especially with the nth qld humidity
Not too sure about that chain drive for such a heavy vehicle, but at least it will be easy to change if the chains breaks 👍
You are so incredible. in your work and the enthuasuim.
Watch out fer Jack's Nuts,Darryl.....
Listen guys,great building as usual........Will watch this...build up..
Outstanding video and presentation
Very cool stuff here. Interesting, engaging content, technical without being overwhelming. Nice clear photography and editing. Definitely top of the game here. Thanks for all you do restoring these pieces of history.
Brilliant keep up the good work!
Прекрасно! Ждем продолжения.
Excellent as always.
Great video and way to help the kid plus his site out. His membership will climb exponentially.
Fantastic work as always. I wish you could get a Tiger ll and bring one back to life.
Thanks
Wowee! Thank YOU Chris and Sue!
Oh yes. The unmistakable twang of a British Northerner 😆 Top bloke 👍
If it was me I would put the engine hold-down bolts in from the bottom and have nuts/washers on top of the engine bearers, that way if anything comes loose you'll be able to see it, the way it is now a nut could come loose and even drop off - also, they might get rusted on under there. Regarding links in chain, with a joining link it is good practice to have the closed end of it pointing in the direction of travel, probably can't be done here because of the requirements but I'd recommend arranging it so that the most common drive use has the closed end going in the direction of rotation.
If you put the bolt in from the bottom and the nut comes off then the bolt falls all the way out. 😄
@@Eisen_Jaeger Exactly, you then know you have a problem.
LOL - send the "OLD" boy under! Good one Daz!