Kurtis might just be a magician after this one 🧙♂✨Double-acting cylinders seem complex, but we've broken down the repair process step-by-step! What part of the repair surprised you the most? Let us know in the comments and if you have any questions, fire away! 😄👍 WATCH: Cracked Telescopic Cylinder Weld Repair ua-cam.com/video/Aa2csAP8M6I/v-deo.html 🔔Hit the notification bell so you never miss our new weekly video. ✍Leave a comment below with your questions or thoughts. 🔓Get Early Access & Ad Free videos in our Patreon community: www.patreon.com/cuttingedgeengineering 🛒Check out all our CEE Merch here: www.ceeshop.com.au
Kurtis made that look easy, but I remember from the last one that they are not. I was surprised at how deformed that inner tube was, curious how that might have happened. Anyway, another excellent video! Cheers 🍻
Not enough recognition goes to Karen for the great camera and editing work she creates ( and occasional laugh ) . Curtis is a master machinist, designer, welder and Karen is no less of a master of her craft. Thanks to both of you for your excellent work.
Unquestionably! Karen’s work is just as detailed as is Kurtis! The appropriate use of slow motion and time lapse is critical for understanding what is happening.
The maintenance chiefs of every mining and construction company within a hundred miles must have CEE's number on speed dial. So many skills; machining, mechanic, welder, combined in one honest, hard-working individual is a rare gem indeed. Thanks again, Kurtis.
@@a.karley4672Yes, double it and add a zero and you'd be getting closer to CEE's catchment with repeat business demanding the best and wanting it down yesterday. Australia is bloody big. I'd love to know if he gets distant work such as from Victoria and Western Australia.
Sir, I am a 72-year-old machine maintenance repairman. who retired years ago. You manage to show me something new every week. Thank you for that. Even though I am not a machinist I see how the parts I sent out for repair were done. Keep up the good work. I can't wait for you to get back on the crane. Larry
I'm always impressed by how Kurtis gets the lifting slings pretty well at the centre of gravity every time he lifts something, even those long cylinders with big bits on the end.
The edit out the off balance ones heading towards perfection.. but in reality, with practice over years you can get mighty good at eyeballing it.. I would lay odds he gets it right most of the time, no take 2 or 3 needed..
After years here with you guys, I tend to forget just how high the quality level is, until I watch someone else's shop videos and it really makes me appreciate how much time and effort goes into video production, when it isn't even your primary job.
At 80 years old, I don't think you have any worrys from me taking your crown Kurtis. But I always love to see the shiny metal that is hiding under that rust. Thanks for sharing this video very informative and entertaining. Best regards from the UK Ken
Mick Jagger performed yesterday at Jazz Fest in New Orleans, after a 5 year delay. He was dancing all over the stage outside in the humid heat at 80. Amazing. It must be nice to make a fortune doing something you love.
I am a scientific scholar who - in 1966 - SINCERELY took a mechanical aptitude test, wherein I achieved five correct answers out of two hundred forty questions! To say that I find what you do and your attitude amazing, is an understatement of galactic proportions! Thanks!
I've said it before and I'll say it again. Kurtis and Karen are an amazing team providing us lucky viewer's with some of the best content on UA-cam. Thanks you two.
Kurtis, not only are you an amazing machinist, but you also get my thumbs-up for being someone who consistently puts himself out to do as many takes as is necessary to narrate coherently. Most of us might have given up ages ago. That alone is inspiring. Thank you, too, Karen, for giving Kurtis the space necessary to show up so professionally -- and to remind us that these aren't all "first takes"! Cheers, Mates!
Здравствуйте Карен и здравствуйте Кёртис. Ваша работа как всегда на высоте. Получил эстетическое удовольствие от просмотра вашей работы. Кёртис это конечно не моё дело, но не поднимайте тяжести в ручную. У вас прекрасно оборудованая мастерская, есть множество подъёмных приспособлений не поднимайте тяжести ,берегите спину. Всех благ и здоровья . Ждём финала с подъёмным краном.
Thanks to Google translate: Hello Karen and hello Curtis. Your work is excellent as always. I received aesthetic pleasure from viewing your work. Curtis, it's certainly none of my business, but don't lift weights by hand. You have a well-equipped workshop, there are many lifting devices, do not lift heavy objects, take care of your back. All the best and health. We are waiting for the finale with the crane.
@@cyrilhudak4568 Yes, thought the same. The back catches up with you in the end. Speaking with some experience. And yes to the enjoying the work done. Its quality and the thought that has gone into it. And a thankyou to Google translate as well.
I am not a machinist. I worked in offshore oil drilling until I retired. I am from Louisiana, USA. I really enjoy watching your show. You have a great partner, Karen. You are so blessed to have her.
Great vidio again, Thanks. Kurtis as a narrator you make a fantastic machinist/welder. And Karen as a videographer you make a brilliant videographer with patience and nice nails. cheers.
Very impressed with the way you got the offset bend in the center tube. I stopped the video before you showed how you did it and tried to think how I would do it but your solution was much better than anything I could come up with. Very impressive engineering. Thanks for sharing.
Interesting that Kurtis has a couple of *sets* of the right size half-cylinder "dies" to provide the necessary stiffness for controlling where the offset happens. I suspect there's a "shop-made tools" story hiding there. Not the first time he's had to do something like this, clearly, and whenever he needs a new size of dies, he makes them, if there's nothing the right size already in the toolbox.
I only have 2 things, 1 - this channel and Bigstackd make my Fridays so much better, thank you for that, and also, as someone who has welded before, I cannot overstate how amazing your control is during your welding, if it wasn't for the fact I could clearly see your hands, that looked like a machine welding, it was that precise.
I was surprised to see that inner tube look like a cork screw shape. This video made me wonder about the history of lathes. I mean who ever thought about using metal against metal to cut things? Great video! So much work goes into this it just amazes me.
Andrey Nartov came up with the designs and built the first lathe in 1718, as for cutting metal with metal, its been a well known concept ever since we learned to forge metal.
@@panzerfaus8459 Sorry pal ,you are years out .... The origin of lathe machine invention started in the 13th century when the Egyptians first designed a two-person lathe. Later after some years, the Romans improved the Egyptians lathe machine by adding a turning bow.
The origin of lathes is lost in the mists of time. The earliest lathes were probably wood- or bone-turning lathes to make bowls, beads, etc, way back in the stone age. They have actually found turned wooden items of 4000 years old in England. Some would consider the potter's wheel a lathe, those are 6000+ years old.
@@jamielee9350 fine ill add the pendantic qualifier of a carriage lathe, a lathe that can hold tolerance and cut metal (1718). Turning bows have been around forever, but werent commonly used to shape metal, only wood and stone.
Took an extra long weekend away from the city rat race crap so I'm really late on this one! But at least I have something to watch tonight! Cheers as always!
Hey mate, thanks for the support! We truly appreciate it. We hope you had an awesome weekend away and enjoyed some down time! Cheers! Kurtis, Karen & Homey
I wish I had learned skills like this. The tooling and the confidence and ability to literally disassemble anything and fix it and put it back together is incredible. Like with the crane, the cab is rusty and I want to change some things, so I am just going to completely remove it, and build a new one from raw materials... you Sir are a master!
I love seeing you get some good use out of that new deep-reach button tool! Whenever I see you use your shop-made tools I have a moment where I'm like, "I remember when he MADE that!" Also, Karen getting spooked when that outer tube weld finally dropped and it hit the floor was pretty funny. I'd love to see her on cam more!!
When I saw the inner tube on that cylinder the way it was so far out of shape, I was amazed at how much pressure those parts endured!!! I’ve never seen anything like that before!! I never knew that the tube didn’t run parallel with the inner diameter of the cylinder! I know that there has to be a a logical reason for it, but just didn’t know. I enjoy watching you show your craft!! You do some AWESOME work, man!!! Keep up the great work and the great video content!!! I really get a kick out of the out-takes at the end!! I can relate!! Lol!!! You and your family take care, and stay safe, Curtis!!
I've basically said this before but it bears repeating, so I'll say it again. The machining and craftsmanship is great to see, and the laughs and not being afraid to take the piss out of yourselves... (well mainly Kurtis but he deserves it😉) are really enjoyable. But the best part of your videos is something that really can't be filmed. It's kind of reading behind the lines to see how you two are just great mates.
Love the engineering failure analysis! Being able to do stuff is nice, but understanding why something failed and what can be done to fix it is priceless.
Yep. And close observation is priceless. I remember being asked to examine a piece of failed drill pipe (3 days to fish the lost assembly out of the hole- so about a half-million USD event cost) on the rig. Because as a geologist, I had the only microscope on board. Found a crack origination fracture - like Kurtis showed - in a die scar. The gripping dies shouldn't be applied there, but on the thicker tool joint. Which I then photographed, from lots of angles. User error by the drill crew, not a failure of the (rented) pipe. Which didn't please the drill crew, but the oil company (who paid my bill) were glad to get an answer. And to have a subject for their Sunday afternoon safety and efficiency crew discussion.
For a moment there my brain went "wtf?" when you were bending the inner tube but then I remembered that the port is offset at one end and bore centred at the other. It does look odd but a lot better than the thing you chopped off. Always amazes me when I see how heat expands metal when you dropped the cylinder off plus the whole science of cutting tools is an art unto itself. I really should have been a mechanical engineer instead of playing with electrical pixies. Your work is amazing and your feathered friends are very musical, much more so than UK magpies and just as handsome. Big hugs to you both and belly rubs for Homie. Have a great day
Great work on the rebuilt cylinder as aways & I gotta say I wonder how out of control Homeless would have been if you hadn't trained him to respond to commands. Love you guys & it's always a great Friday night watching whatever you're fixing. Love the out-takes too, just the best. Billy J...... Beaudesert, Q'ld. OZ.
I wonder if the intensity and UV does any damage to the camera sensor. Scratch the UV - any modest amount of regular glass would filter that to negligible. But the intensity worries me. Slightly.
Whatever your charging it ain’t enough brother! Your knowledge is truly unbelievable,not only of the work you are doing,but how to use those machines to do it. Totally amazing. You,your wife and dog are an absolutely great winning team. And Greeting: from Panama City Beach,Florida USA.
This makes my Friday mornings a lot more fun! Morning wake and bake with CEE!! You keep me in stitches, with the antics, with some serious engineering going on, in between!! Thank you Karen and Kurtis for the great content and expertise! You all bring that talent and ability to the table, everyday! Homeless and the Butcher Birds round out this little group, Perfectly!! GOOD ON YA, ALL! 👍👍👏👏😎😎🧠✨
Hi Kurtis and Karen, since finding your channel appearing in my list a few weeks ago, I've been thoroughly enjoying your channel on grinding, machining and welding the large and heavy steel bits that come through your door. I've proven to myself, as I'm still here, churning my way through video after video showing your fine machining skills on high quality alloy steel, where the swarf just peels off the rod and tube in lovely long spiralling lengths. - Cutting speeds perfectly proven! It's just so relaxing to watch a craftsman machinist, welder, fitter and turner in action! Karen, your video and editing skills are second to none. You've obviously now worked out what positions and angles work really well to capture Kurtis in action through all aspects of his work. As an technician engineer in radio communications for nearly 30 years in New Zealand and also Victoria, my long ago machine shop engineering training and skills learnt in the high voltage electrical industry covered most of what Kurtis does, but on a much smaller scale and mostly now forgotten! I've now got my elderly father's tooling and Emco lathe in my garage. I must get back on the lathe and "turn up" a model 5" gauge live-steam locomotive I've been wanting to build for over 45 years! Hi to Homey and the magpies! My daughter now lives up the road in the city, so if I ever get invited over, I'll shout you guys some coffee, food and a quick visit! Thanks for such a fine channel of great engineering content. Cheers from Christchurch, David.
It's cool to see the "guts" of a hydraulic cylinder like that one. The machines they come from can look like giant lumps of metal but are really a collection of wonderfully complex parts. The Harry Potter bit at the end is priceless. Keep on having fun you two!
@@CuttingEdgeEngineering Most likely but seeing something repaired and put back into service in this throw away world is also good to see. I remember having to throw things away that I knew I could repair as it was just too expensive for labour. Shame really.
@@StageRightvideo On a few of their videos they have had changeover units so I suspect a big company will have spares so that they can afford to wait for a while.
GREAT..... now after watching the entire video and then coming to the comments, I had to re-watch the intro about 10 times and I STILL ONLY HEAR, "Hey young guys" instead of, "How you going guys" 🤣!!! Anyways, another awesome video to start my Friday off! I was REALLY HOPING for part 258 of the Franna Crane project, but theres always next week!! Cheers from Tulsa OK!
That piece of inner tube looked like they reused a piece of exhaust pipe at the factory 😂 truly a piece of modern industrial art! As per usual, team Karen&Kurtis gets the job done! 🎉
@@gabrielecossettini2923 That would more likely have produced two kinks, not a smooth bend. (IME, seeing a fair few bits of 3.5in and 5.5in drill pipe get smashed into the bottom of the hole by inattentive drillers.)
Thanks for the video Kurtis and Karen great job on the cylinder well done 👍❤❤❤. Take care of yourself and family and friends and Homey 🐕 and be Blessed.
You are a "WIZARD" Kurtis..... There is no doubt about that. Exceptional work , bending the center tube offset with the press was todays educational learning.
Hello CEE team, greetings from (rainy) Belgium 🙂. Nice breakdown on how to repair double-acting cylinders as explaining how they work. Sometimes they can be a real headache from a machining and precision perspective. Another happy customer and a job well done. Also would like to some time to thank Karin for the phenomenal job of shooting all the footage and editing all it. Have a great weekend, enjoy the 🍺🍻and the BBQ🍖🥩
Live streaming would be hilarious, Karen would need to incorporate a 4-5 second delay so all of Kurtis's expletives and colourful commentary could be beeped out, it'd be a lot of beebs
Tell no one - the monkey in his head is Sun Wukong, so a live stream would only show Kurtis feeding birds for 8 hours while doing a weeks' worth of work with his mind. His cover story is more interesting to watch.
Karen, Great shot of the smoke curling up out of the tube when Kurtis separated the cylinder... If Kurtis keeps feeding those birds they won't be able to get off the ground!!!!!! LOL Kurtis, That is an interesting live center. I am always amazed at the precision that is required to make the chuck mounting pins and related locks to lock the chucks in place. A very nice machine indeed. Hey Team, I've never seen a setup to bend a tube like that. This wasn't your first rodeo for sure...... WOW!!!!! I am blown away by the complexity of the setup and fitting to finish that part. I have learned how important proper preheat and good tack welds are for all the work guys like you, On Fire Welding, and Isaac have encountered in the work you all perform like breathing... AMAZING!!! Best vid ever.
I swear this guy is like a gantry hoist surgeon. Maybe there's a bunch of dented up panels out of frame but the way he manipulates a heavy assembly simultaneously up, down, over, and through lathes and across the shop makes me clench up thinking of how many broken fingers I'd have by now!
The bird's were thinking, boy I'm hungry, me too but Kurtis is really busy to day. Let's make some noise and jump around the shop door, ok, let's do it. You're idea WORKED! Here he comes. Kurtis and Karen taking care of business, the birds, playing with homeless! LOVE THIS SHOW!.... AMAZING REPAIRS, SAVING THE CUSTOMER BIG MONEY! CEE WAY!!!
Top class job, Kirtis, Karen and safety officer Homie. I'm always amazed at your ability. I don't know why 'cos I've watched all of your vids here in the UK. Bravo, y'all! 🔥
Thank you Curtis I am a novice at machining I work in a cylinder head shop where I use a mill to do machine work. I love watching your videos and I am encouraged evertime you put a new one up, thank you!!!!!
I’m watching the last 10 minutes of your video while getting fuel in my truck. Now I’m the strange guy that’s laughing while filling up his truck. Thanks Kurtis and Karen for the laughs, always nice to see homeless and your feathered pets. Have a good weekend.
I really love the fact that Kurtis always knows how to fix problems, where to start en in which sequence of events all the things have to be done. I would have no idea where to start and would probably do something beyond fixing or have a lot of rework to get through. I better stay behind my computer, althoug i love the technical masterclasses of CEE.
Hi Kurtis and Karen, loved watching that complicated repair, I didn't realize that tube could get so crushed, the forces involved must have been massive. I really loved the outtake with the 'Harry Potter' broom riding. It really made me laugh, especially when Karen loses it completely. Cheers from 'Up Over' Montreal Canada
That without a doubt was a great repair. The breakdown putting the off set in the inside tube, The set up for reassembly , And the total project was great to see. Very impressive.
Kurtis might just be a magician after this one 🧙♂✨Double-acting cylinders seem complex, but we've broken down the repair process step-by-step! What part of the repair surprised you the most? Let us know in the comments and if you have any questions, fire away! 😄👍
WATCH: Cracked Telescopic Cylinder Weld Repair ua-cam.com/video/Aa2csAP8M6I/v-deo.html
🔔Hit the notification bell so you never miss our new weekly video.
✍Leave a comment below with your questions or thoughts.
🔓Get Early Access & Ad Free videos in our Patreon community: www.patreon.com/cuttingedgeengineering
🛒Check out all our CEE Merch here: www.ceeshop.com.au
47 seconds late. Tardy :)
My favourite part of Friday… more CEE goodness! Whoop whoop!! 🥳🥳🥳
Might? He is! I enjoy watching how he comes up with solutions with the equipment he has.
Kurtis made that look easy, but I remember from the last one that they are not. I was surprised at how deformed that inner tube was, curious how that might have happened. Anyway, another excellent video! Cheers 🍻
Nice job guys, appreciate your work. Have a banger weekend!
Lovely shot of Kurtis’ nails at 2:50. I don’t know how he keeps them looking so nice.
That weekly mani-pedi is really paying off for him.
Hydraulic oil and Trefelex. Does em wonders 👍
Hahaha! It wasn't him 🙂
He just welds on new nails if they ever break.
pervert?
Not enough recognition goes to Karen for the great camera and editing work she creates ( and occasional laugh ) . Curtis is a master machinist, designer, welder and Karen is no less of a master of her craft. Thanks to both of you for your excellent work.
Unquestionably! Karen’s work is just as detailed as is Kurtis! The appropriate use of slow motion and time lapse is critical for understanding what is happening.
The maintenance chiefs of every mining and construction company within a hundred miles must have CEE's number on speed dial.
So many skills; machining, mechanic, welder, combined in one honest, hard-working individual is a rare gem indeed.
Thanks again, Kurtis.
Plus, he did spend years as a maintenance worker himself. Helps to know how things are done in the field.
A lot more than 100 miles.
@@a.karley4672Yes, double it and add a zero and you'd be getting closer to CEE's catchment with repeat business demanding the best and wanting it down yesterday. Australia is bloody big. I'd love to know if he gets distant work such as from Victoria and Western Australia.
try few thousand miles
Miles? Is that the same as kilobananas? Or perhaps megabananas?
Sir, I am a 72-year-old machine maintenance repairman. who retired years ago. You manage to show me something new every week. Thank you for that. Even though I am not a machinist I see how the parts I sent out for repair were done. Keep up the good work. I can't wait for you to get back on the crane.
Larry
I'm always impressed by how Kurtis gets the lifting slings pretty well at the centre of gravity every time he lifts something, even those long cylinders with big bits on the end.
Years of practice.
@@onkcuf +good editing?
I lol'd when he just lifted the rod with his hands in the end, like "man, thats just faster" :)
I lost my left arm at the age of 12, after fifty years that is a skill that I have learned and appreciate
The edit out the off balance ones heading towards perfection.. but in reality, with practice over years you can get mighty good at eyeballing it.. I would lay odds he gets it right most of the time, no take 2 or 3 needed..
After years here with you guys, I tend to forget just how high the quality level is, until I watch someone else's shop videos and it really makes me appreciate how much time and effort goes into video production, when it isn't even your primary job.
That's exactly what I think watching stuff on similar channels. It's some kind of relief coming back to true craftsmanship 😀
Totally agree
At 80 years old, I don't think you have any worrys from me taking your crown Kurtis. But I always love to see the shiny metal that is hiding under that rust.
Thanks for sharing this video very informative and entertaining.
Best regards from the UK Ken
Mick Jagger performed yesterday at Jazz Fest in New Orleans, after a 5 year delay. He was dancing all over the stage outside in the humid heat at 80. Amazing. It must be nice to make a fortune doing something you love.
Thank you for your work old timer. Respect from Ca
@@billsimpson604 But did Mick know where he was and why they made him dance?..
Kurtis is legit one of the best welders on UA-cam and best of all he doesn't waste time bragging he just gets it done, , love from England.
Great job there. When you gave the price of a new rod assembly, I nearly spat out my beer ! Dang ! Didn't realize that Kurtis had such lovely nails !
The broomstick part cracked me up 😂
I'm just imagining Curtis in Griffendor cloak
It's plain to see the love and friendship Kurtis and Karen have for one another, especially in the bloopers.
Kurtis.@ 2:50 I am mightily impressed that you can maintain manicured hands doing the type of work you do.
That what she said "I'm going to need four hands"😊
Ps..the milk crate be killer
Kurtis is definitely a wizard, a wizard of heavy equipment repair!! He fixes things like it’s magic.
... yet another master class from Karen and Kurtis ... thanks guys ...
I simply don't understand how you weld so consistently. I have welded for years and can't do what you do! AMAZING!
"You're a wizard Harry", hilarious you two!
I am a scientific scholar who - in 1966 - SINCERELY took a mechanical aptitude test, wherein I achieved five correct answers out of two hundred forty questions! To say that I find what you do and your attitude amazing, is an understatement of galactic proportions! Thanks!
So good to see you both laugh with each other. Keep it up and the great videos too.
I've said it before and I'll say it again. Kurtis and Karen are an amazing team providing us lucky viewer's with some of the best content on UA-cam. Thanks you two.
Kurtis, not only are you an amazing machinist, but you also get my thumbs-up for being someone who consistently puts himself out to do as many takes as is necessary to narrate coherently. Most of us might have given up ages ago. That alone is inspiring. Thank you, too, Karen, for giving Kurtis the space necessary to show up so professionally -- and to remind us that these aren't all "first takes"! Cheers, Mates!
Здравствуйте Карен и здравствуйте Кёртис. Ваша работа как всегда на высоте. Получил эстетическое удовольствие от просмотра вашей работы. Кёртис это конечно не моё дело, но не поднимайте тяжести в ручную. У вас прекрасно оборудованая мастерская, есть множество подъёмных приспособлений не поднимайте тяжести ,берегите спину. Всех благ и здоровья . Ждём финала с подъёмным краном.
Thanks to Google translate: Hello Karen and hello Curtis. Your work is excellent as always. I received aesthetic pleasure from viewing your work. Curtis, it's certainly none of my business, but don't lift weights by hand. You have a well-equipped workshop, there are many lifting devices, do not lift heavy objects, take care of your back. All the best and health. We are waiting for the finale with the crane.
@@cyrilhudak4568 Yes, thought the same. The back catches up with you in the end. Speaking with some experience.
And yes to the enjoying the work done. Its quality and the thought that has gone into it.
And a thankyou to Google translate as well.
I am not a machinist. I worked in offshore oil drilling until I retired. I am from Louisiana, USA. I really enjoy watching your show. You have a great partner, Karen. You are so blessed to have her.
Great vidio again, Thanks. Kurtis as a narrator you make a fantastic machinist/welder. And Karen as a videographer you make a brilliant videographer with patience and nice nails. cheers.
Educational, informational, and entertainment in one video. You can't beat that combination.
Very impressed with the way you got the offset bend in the center tube. I stopped the video before you showed how you did it and tried to think how I would do it but your solution was much better than anything I could come up with. Very impressive engineering. Thanks for sharing.
Why does that inner tube needs to be bent?
@@Sindarulthe Inlet in the flange head is offset whereas the outlet in the bottom is centralised
Interesting that Kurtis has a couple of *sets* of the right size half-cylinder "dies" to provide the necessary stiffness for controlling where the offset happens.
I suspect there's a "shop-made tools" story hiding there. Not the first time he's had to do something like this, clearly, and whenever he needs a new size of dies, he makes them, if there's nothing the right size already in the toolbox.
very impressive manual offset bend.
I was impressed with your method of adding the bend. You're a magician!
That pressure stretching: amazing!
I only have 2 things, 1 - this channel and Bigstackd make my Fridays so much better, thank you for that, and also, as someone who has welded before, I cannot overstate how amazing your control is during your welding, if it wasn't for the fact I could clearly see your hands, that looked like a machine welding, it was that precise.
I was surprised to see that inner tube look like a cork screw shape.
This video made me wonder about the history of lathes. I mean who ever thought about using metal against metal to cut things?
Great video! So much work goes into this it just amazes me.
Andrey Nartov came up with the designs and built the first lathe in 1718, as for cutting metal with metal, its been a well known concept ever since we learned to forge metal.
@@panzerfaus8459 Sorry pal ,you are years out .... The origin of lathe machine invention started in the 13th century when the Egyptians first designed a two-person lathe. Later after some years, the Romans improved the Egyptians lathe machine by adding a turning bow.
@@panzerfaus8459 the first modern lathe with gears and a carriage. Lathes as turning device for shaping are pre-historic.
The origin of lathes is lost in the mists of time. The earliest lathes were probably wood- or bone-turning lathes to make bowls, beads, etc, way back in the stone age. They have actually found turned wooden items of 4000 years old in England.
Some would consider the potter's wheel a lathe, those are 6000+ years old.
@@jamielee9350 fine ill add the pendantic qualifier of a carriage lathe, a lathe that can hold tolerance and cut metal (1718). Turning bows have been around forever, but werent commonly used to shape metal, only wood and stone.
That is one seriously complicated cylinder rebuild Kurtis. Well done mate.
The inner tube coming out and being twisted like that was a surprise. Thank you for another great video. Cheers
the closeup filming of the welding is really awesome 👏👏👏
You're a wizard, Kurtis! Great job!!!
Took an extra long weekend away from the city rat race crap so I'm really late on this one! But at least I have something to watch tonight! Cheers as always!
Hey mate, thanks for the support! We truly appreciate it. We hope you had an awesome weekend away and enjoyed some down time! Cheers! Kurtis, Karen & Homey
I wish I had learned skills like this. The tooling and the confidence and ability to literally disassemble anything and fix it and put it back together is incredible. Like with the crane, the cab is rusty and I want to change some things, so I am just going to completely remove it, and build a new one from raw materials... you Sir are a master!
Bending that tube was amazing!
Nada mejor que ver a Kurtis haciendo su trabajo en mi tiempo de receso en mi trabajo Saludos!!!!
I love seeing you get some good use out of that new deep-reach button tool! Whenever I see you use your shop-made tools I have a moment where I'm like, "I remember when he MADE that!" Also, Karen getting spooked when that outer tube weld finally dropped and it hit the floor was pretty funny. I'd love to see her on cam more!!
Bro, your wife is funny. I think your dog and her laugh antics make your content more relatable.
In my USA opinion. God bless our world.
Setting up and bending the offset in the 6mm thick wall tubing with your press was quite ingenious!! Ray Stormont
When I saw the inner tube on that cylinder the way it was so far out of shape, I was amazed at how much pressure those parts endured!!! I’ve never seen anything like that before!! I never knew that the tube didn’t run parallel with the inner diameter of the cylinder! I know that there has to be a a logical reason for it, but just didn’t know. I enjoy watching you show your craft!! You do some AWESOME work, man!!! Keep up the great work and the great video content!!! I really get a kick out of the out-takes at the end!! I can relate!! Lol!!! You and your family take care, and stay safe, Curtis!!
I've basically said this before but it bears repeating, so I'll say it again.
The machining and craftsmanship is great to see, and the laughs and not being afraid to take the piss out of yourselves... (well mainly Kurtis but he deserves it😉) are really enjoyable.
But the best part of your videos is something that really can't be filmed.
It's kind of reading behind the lines to see how you two are just great mates.
Hey mate we're glad you enjoy the laughs and the behind-the-scenes camaraderie 😂👍
@@CuttingEdgeEngineeringsending much love to you all and ESPECIALLY homeless from the city of Spokane WA USA.
I can't add much to all of the other comments. It's absolutly amazing to me what you are able to do. I really enjoy your videos.
La prise de vue est admirable, Karen est géniale. Bravo à vous deux que dieu vous bénisse.
Thanks Again! Good Show!
Glad you enjoyed this one mate, thanks for your continued support! Cheers!
I look forward to your videos at the end of every week!
Love the engineering failure analysis! Being able to do stuff is nice, but understanding why something failed and what can be done to fix it is priceless.
Yep. And close observation is priceless. I remember being asked to examine a piece of failed drill pipe (3 days to fish the lost assembly out of the hole- so about a half-million USD event cost) on the rig. Because as a geologist, I had the only microscope on board. Found a crack origination fracture - like Kurtis showed - in a die scar. The gripping dies shouldn't be applied there, but on the thicker tool joint. Which I then photographed, from lots of angles. User error by the drill crew, not a failure of the (rented) pipe. Which didn't please the drill crew, but the oil company (who paid my bill) were glad to get an answer. And to have a subject for their Sunday afternoon safety and efficiency crew discussion.
For a moment there my brain went "wtf?" when you were bending the inner tube but then I remembered that the port is offset at one end and bore centred at the other. It does look odd but a lot better than the thing you chopped off. Always amazes me when I see how heat expands metal when you dropped the cylinder off plus the whole science of cutting tools is an art unto itself.
I really should have been a mechanical engineer instead of playing with electrical pixies.
Your work is amazing and your feathered friends are very musical, much more so than UK magpies and just as handsome. Big hugs to you both and belly rubs for Homie. Have a great day
Great work on the rebuilt cylinder as aways & I gotta say I wonder how out of control Homeless would have been if you hadn't trained him to respond to commands. Love you guys & it's always a great Friday night watching whatever you're fixing. Love the out-takes too, just the best. Billy J...... Beaudesert, Q'ld. OZ.
my favorite channel on the tube. this guy influenced me to now buy my 1st lathe and milling machine
I haven't used a welder for 20 years but I still reflexively shade my eyes when you strike an arc on video.
I wonder if the intensity and UV does any damage to the camera sensor.
Scratch the UV - any modest amount of regular glass would filter that to negligible. But the intensity worries me. Slightly.
The outtakes are the best part of the video it shows all of the hard work that goes into producing a video while running a machine shop
Woke up at 3:20am and saw your video was posted and thought what the heck let's watch it. Wasn't disappointed!!!❤❤❤
Whatever your charging it ain’t enough brother! Your knowledge is truly unbelievable,not only of the work you are doing,but how to use those machines to do it. Totally amazing. You,your wife and dog are an absolutely great winning team. And Greeting: from Panama City Beach,Florida USA.
This makes my Friday mornings a lot more fun! Morning wake and bake with CEE!! You keep me in stitches, with the antics, with some serious engineering going on, in between!! Thank you Karen and Kurtis for the great content and expertise! You all bring that talent and ability to the table, everyday! Homeless and the Butcher Birds round out this little group, Perfectly!!
GOOD ON YA, ALL!
👍👍👏👏😎😎🧠✨
Absolute wizard staff that interior hydraulic pipe is.
Hi Kurtis and Karen, since finding your channel appearing in my list a few weeks ago, I've been thoroughly enjoying your channel on grinding, machining and welding the large and heavy steel bits that come through your door. I've proven to myself, as I'm still here, churning my way through video after video showing your fine machining skills on high quality alloy steel, where the swarf just peels off the rod and tube in lovely long spiralling lengths. - Cutting speeds perfectly proven! It's just so relaxing to watch a craftsman machinist, welder, fitter and turner in action!
Karen, your video and editing skills are second to none. You've obviously now worked out what positions and angles work really well to capture Kurtis in action through all aspects of his work.
As an technician engineer in radio communications for nearly 30 years in New Zealand and also Victoria, my long ago machine shop engineering training and skills learnt in the high voltage electrical industry covered most of what Kurtis does, but on a much smaller scale and mostly now forgotten! I've now got my elderly father's tooling and Emco lathe in my garage. I must get back on the lathe and "turn up" a model 5" gauge live-steam locomotive I've been wanting to build for over 45 years!
Hi to Homey and the magpies! My daughter now lives up the road in the city, so if I ever get invited over, I'll shout you guys some coffee, food and a quick visit!
Thanks for such a fine channel of great engineering content. Cheers from Christchurch, David.
Just wanted to say how much I appreciate your filming and editing style , thank you Karen 🏆🥇.
You are so welcome!
It's cool to see the "guts" of a hydraulic cylinder like that one. The machines they come from can look like giant lumps of metal but are really a collection of wonderfully complex parts. The Harry Potter bit at the end is priceless. Keep on having fun you two!
Both of you are wizards...LOL!!! Your videos and are magical and enchanting to watch...LOL!! Love your content...Fantastic work!!!
And those rod assemblies are EXPENSIVE! I imagine the customer cried seeing the replacement cost.
yeah they were happy to wait for us to repair this one, definitely a good saving for them!
@@CuttingEdgeEngineering Most likely but seeing something repaired and put back into service in this throw away world is also good to see.
I remember having to throw things away that I knew I could repair as it was just too expensive for labour.
Shame really.
There's the cost of the machine's down time as well and that can be huge.
@@StageRightvideo On a few of their videos they have had changeover units so I suspect a big company will have spares so that they can afford to wait for a while.
It’s a privilege to be allowed into such skilled man’s workshop. Also the clever videographer shows views that are very informative.
OMG - video was great! Ending was the BEST!!!! "Ride it like you stole it Harry!" LOL....
Is been a year since I started watching your channel from Ethiopia.
Awesome! Thanks for sticking with us we hope you keep enjoying the vids mate 👍
3am in USA. It’s a good thing I can’t sleep, when I get to see a CEE premiere.
8:30 AM here now. I saw the same video you did. Neat.
same 😂😂😂😂
Same
Midnight here.. Wife thinks I must be watching porn.. Right "Lathe Porn".. Guilty..:)
Same
GREAT..... now after watching the entire video and then coming to the comments, I had to re-watch the intro about 10 times and I STILL ONLY HEAR, "Hey young guys" instead of, "How you going guys" 🤣!!! Anyways, another awesome video to start my Friday off! I was REALLY HOPING for part 258 of the Franna Crane project, but theres always next week!! Cheers from Tulsa OK!
That piece of inner tube looked like they reused a piece of exhaust pipe at the factory 😂 truly a piece of modern industrial art!
As per usual, team Karen&Kurtis gets the job done! 🎉
Probably someone cut the tube a little bit longer and then pressed it inside🤣
@@gabrielecossettini2923 That would more likely have produced two kinks, not a smooth bend. (IME, seeing a fair few bits of 3.5in and 5.5in drill pipe get smashed into the bottom of the hole by inattentive drillers.)
I love how you can repair or even remanufactor a component and save so much money for your customers.
Friday before lunch and the entire day is saved by another superb video from the CEE magicians (including Homey SO)
Thanks for the video Kurtis and Karen great job on the cylinder well done 👍❤❤❤. Take care of yourself and family and friends and Homey 🐕 and be Blessed.
Good morning from Greece.
You are a "WIZARD" Kurtis..... There is no doubt about that.
Exceptional work , bending the center tube offset with the press was todays educational learning.
Hello CEE team, greetings from (rainy) Belgium 🙂. Nice breakdown on how to repair double-acting cylinders as explaining how they work. Sometimes they can be a real headache from a machining and precision perspective. Another happy customer and a job well done.
Also would like to some time to thank Karin for the phenomenal job of shooting all the footage and editing all it. Have a great weekend, enjoy the 🍺🍻and the BBQ🍖🥩
your a wizard harry -- by far the best outtake I have seen
Friday Night tradition continues! Have you ever thought about doing a live stream on a machining day?
Live streaming would be hilarious, Karen would need to incorporate a 4-5 second delay so all of Kurtis's expletives and colourful commentary could be beeped out, it'd be a lot of beebs
Tell no one - the monkey in his head is Sun Wukong, so a live stream would only show Kurtis feeding birds for 8 hours while doing a weeks' worth of work with his mind. His cover story is more interesting to watch.
8205; what have you been smoking?
He'll of a Job Kurtis. love the outcuts. Makes me laugh all the time. Looking forward to the next one.
Good morning from the UK 👋🇬🇧
I always enjoy friday mornings with a new CEE video. love to watch the machining of parts. Illinois, USA
Morning from uk.
Karen, Great shot of the smoke curling up out of the tube when Kurtis separated the cylinder... If Kurtis keeps feeding those birds they won't be able to get off the ground!!!!!! LOL Kurtis, That is an interesting live center.
I am always amazed at the precision that is required to make the chuck mounting pins and related locks to lock the chucks in place. A very nice machine indeed.
Hey Team, I've never seen a setup to bend a tube like that. This wasn't your first rodeo for sure...... WOW!!!!!
I am blown away by the complexity of the setup and fitting to finish that part.
I have learned how important proper preheat and good tack welds are for all the work guys like you, On Fire Welding, and Isaac have encountered in the work you all perform like breathing...
AMAZING!!! Best vid ever.
I swear this guy is like a gantry hoist surgeon. Maybe there's a bunch of dented up panels out of frame but the way he manipulates a heavy assembly simultaneously up, down, over, and through lathes and across the shop makes me clench up thinking of how many broken fingers I'd have by now!
I am impressed by the quality of the repair and the video. Homeless is keeping his humans safe and reducing the treat supply.❤❤❤.
The bird's were thinking, boy I'm hungry, me too but Kurtis is really busy to day. Let's make some noise and jump around the shop door, ok, let's do it. You're idea WORKED! Here he comes. Kurtis and Karen taking care of business, the birds, playing with homeless! LOVE THIS SHOW!.... AMAZING REPAIRS, SAVING THE CUSTOMER BIG MONEY! CEE WAY!!!
Top class job, Kirtis, Karen and safety officer Homie. I'm always amazed at your ability. I don't know why 'cos I've watched all of your vids here in the UK. Bravo, y'all! 🔥
The intro, I hear "hey young guys" every time 😂
you're not the only one, what Kurtis actually says is "How you going guys" 😂
On a similar note have you ever considered changing the business name to one he can actually pronounce without tripping over it😅
@@CuttingEdgeEngineeringI refuse to believe that
@@charging_station2 i 2nd this. Its “Hey young guys” 100%
@@CuttingEdgeEngineering Never change 😊
Kurtis really is a WIZARD at his craft..
Always a pleasure to watch your work..
@12:25 Birds: "Yeah, you've been giving us treats for months but can we really trust you?"
"Seems like a trap but there's some food..."
I'm thinking because the see what homie does to his toys🤣😂
The dinosaurs have taken over the asylum. They're working out what to do about the dog.
Thank you Curtis I am a novice at machining I work in a cylinder head shop where I use a mill to do machine work. I love watching your videos and I am encouraged evertime you put a new one up, thank you!!!!!
Does anyone else get a kick out of not understanding Curt's explanation, until the piece comes apart and you have an "ohhhh" moment?
I swear to god, Kurtis, you are bloody amazing!
Kurtis: the only one who could put Humpty Dumpty back together again
The inner tube looks like it belongs on playground equipment. 😄😄
I’m watching the last 10 minutes of your video while getting fuel in my truck. Now I’m the strange guy that’s laughing while filling up his truck. Thanks Kurtis and Karen for the laughs, always nice to see homeless and your feathered pets. Have a good weekend.
9:58 always giving your poor girl a fright. Lol
The camera was surprisingly stable, though. I was expecting a lot more shake.
Wowzers guys, the outtakes today were absolutely hilarious 🙂
Hi Kurtis,
In my opinion your business comprise 10% Science & Engineering and 90% Creative Art Studio.
I really love the fact that Kurtis always knows how to fix problems, where to start en in which sequence of events all the things have to be done. I would have no idea where to start and would probably do something beyond fixing or have a lot of rework to get through. I better stay behind my computer, althoug i love the technical masterclasses of CEE.
😅
#1 😂
See, you beat me every time Matty. Having said that, it was 08:01 before the new video even turned up this time.
G'day Matty
@@Murphyslawfarm how ya goin mate
@@MattysWorkshop Cold and wet up here today so we have the fire place up and rocking tonight so I am nice and warm. How about your self
Hi Kurtis and Karen,
loved watching that complicated repair, I didn't realize that tube could get so crushed, the forces involved must have been massive.
I really loved the outtake with the 'Harry Potter' broom riding.
It really made me laugh, especially when Karen loses it completely.
Cheers from 'Up Over'
Montreal Canada
That without a doubt was a great repair. The breakdown putting the off set in the inside tube, The set up for reassembly , And the total project was great to see. Very impressive.
I made it to the top ten😂
#4 😍
Aha me too 😊
Cookie.jpg