lol.. I swear i just watched a video of Hunter going to court over a speeding ticket.. 2 days later "hello hello helloo, we're cruisin in the chevy stang lets goooooo!!!"
Hunter the CHEVYSTANG is going to throw you in the back seat with the trans brake. Can't wait to see your reaction from your first try. Keep up the good work.
Good to see you having fun and enjoying the car Camaro Mustang I used to have a Mustang but it had a 351 Windsor but I like my Honda's now something different special in my neighborhood thanks for everything you put out and all the information you share with everyone...
The wiring you ripped out of the hub should in theory have gone to your clockspring. This enables your horn to work regardless of how the wheel is turned. (The exception being that there are a limited number of turns in one direction you can make before damaging the spring, so if you disconnect the steering shaft and turn more than the four or five maximum turns the spring can handle, it will break.) This is also what allows your turn signals to turn off when you turn the wheel after indicating your turn.
HunterTuned so just an old school B.O.P rebuilt? Did you have to get an adapter for bell housing & different flexplate? Getting a part list together for my ls swap on my fox. Which looks deff like yours. Keep up the good videos with the foxbody man!
Safety...needs seat belts,seat cage and more... I have watched you for some time now.. every launch or pull . Watch your seat... you go back 3 to 4 inches. It's going to break.. I had a ujoint break @ well past 100+mph not fun.. you need some safety stuff..
Fucking "a" hunter we have to see this thing run at least a 9.99 this year lol...do you ever get kicked out of tracks for running to fast in that car!!!!
transbrake converters are built a lot stronger for the abuse if its a cheap converter it will work until it grenades and why would u run a cheap converter anyways it wont hold over 600whp
lol.. I swear i just watched a video of Hunter going to court over a speeding ticket.. 2 days later "hello hello helloo, we're cruisin in the chevy stang lets goooooo!!!"
Honda Vlogs Lmao typical Hunter lol
And no seat Belt
Your right. Good observation
Chevstang GOTDAMN that thing is for the win. Holy shit more of this please.
Hunter the CHEVYSTANG is going to throw you in the back seat with the trans brake. Can't wait to see your reaction from your first try. Keep up the good work.
Just imagin crusing down the road at 60 and you see some dirt on your windshield so you go to spray it off and bye bye transmission
Good to see you having fun and enjoying the car Camaro Mustang I used to have a Mustang but it had a 351 Windsor but I like my Honda's now something different special in my neighborhood thanks for everything you put out and all the information you share with everyone...
just tried to watch tavarish talk for 20 min then realized there's a new hunter tuned, here for the full 21min lol
B&m sells handles for that shifter with a button on them for around 80$
Yeah...!!! Buddy...!!! Bad Ass man...!!! Can't wait to see track vids of the mustang and civic..!!!
The wiring you ripped out of the hub should in theory have gone to your clockspring. This enables your horn to work regardless of how the wheel is turned. (The exception being that there are a limited number of turns in one direction you can make before damaging the spring, so if you disconnect the steering shaft and turn more than the four or five maximum turns the spring can handle, it will break.) This is also what allows your turn signals to turn off when you turn the wheel after indicating your turn.
None of it works anyways that’s why I ripped it out.
Man your car is badass!
Hahaha old mate in the crown vic doing a fly by after being taunted lol so good to see you back in the turbo ls feeding it all the psi's
I bet it's gonna go into the 9's first track day. Mint!
Killer, I’ve never ran a transbrake either, think you just convinced me to pull the trigger
9.05 first pass. Make it happen great job # huntertuned
nothing could have been more perfect then hunter ripping out unneeded wires out and saying...MINT! lol
holy fucking cholie
Awesome build, man
And....... I’m callin in sick to work on my car today!
Haha nice those 2nd gear pulls look fun as hell
Your Fox is pretty amazing. I too want to combine 2 of the most abundant parts in 'Merica. I want a drift car, though.
Kicking ass buddy and keep up the good work
What rpm did you hold it to
Should have done a 2nd gear pull next to the crown vic
I think you need to try the civic in the mustang in the same race
Which tci transbrake did u purchased?
need to wire the trans brake to a 2 step so you can leave with your foot on the floor @8 or 10lbs
Glad you took the rustang out for a rip!
What rad did you use. Thanks.
Wonder what would happen if you press the transbrake when you're driving????
nothing good
Patrick St George hahaha is it like pressing the e brake???
Oh boy ... oh boy!!
Def pop a driveshaft loop on it.Very cheap safety addition.Fab up one yourself if need be..
Clamdiggerdan Boone has one already
Do anyone have a video on a just in time simple to watch what wire goes to each terminal on just in time coming from msd two step
CHEVSTANG FTW!!!!!
Hey!
I didn’t catch if the brake worked good
:D
Be safe!
LOL go to run the wipers and end up 2 steppin LOL
Wat kind of seats are those? Looks like ITR recaro reps. Ebay?
DC2xYANG I’m not sure they are eBay something
Badass! What kind of 400 is that?
Bmore Fox th400 with a brake and just regular 800hp parts like sprag clutch etc
HunterTuned so just an old school B.O.P rebuilt? Did you have to get an adapter for bell housing & different flexplate? Getting a part list together for my ls swap on my fox. Which looks deff like yours. Keep up the good videos with the foxbody man!
Bmore Fox it’s a small block bolt pattern bellhousing. 1 bolt hole doesn’t line up. So it just have 5 but not issues
Also using a 6.0 4l80e flexplate which matches small block convertor pattern
yea I see 9s no problem
Could of used those 2 wires you pulled off the column! Lol, those don’t spin...
Love this car
Love it man. I’m surprised that you have never had a trans brake before. Should get you to high 9s. #wheelybars
I fucking love this car!!!
Man I want a transbrake on my setup. What’s your rated stall on your converter and what rpm does it sit at on the brake?
nacho1741 I could get like 2800-3000 out of it on the foot brake. Trans brake itnwill probably go 33-3500 I’m thinking I haven’t checked yet honestly
Come to norther indiana and run my tired 302
Hey do you have any vehicles with higher mileage on an on3 turbo. Wondering reliability long term for a daily
davidonmars my On3 silverado I Built on the channel had 248k miles
HunterTuned I mean that actual turbocharger itself
davidonmars I had around 10k miles on mine when I sold it
holy fuck man that looked fast haha
Good job
Haha that second gear pull
Hell yeah man
Hells yeah!
You should of just used the existing 2 wires behind the steering wheel and re route the horn wiring from the front of the car.
I like the wiper switch way better
If u ain't scared your not buolding them right and u dont love them enough
Hey does it work good lol
MIKE J yes lol
DogpileHondaSmile! Good work
He hit ya wit dat ricer fly by
Does it work good, hahahaha... You jist HAD to make this when I already have the trans put of the truck.... Hmmmm....
glad ur not selling it!
Mine is wired to my horn it’s easy just tap into it under the hood
Quit the teasing get the chevystang and the the civic to the track! Lol
Lee 6789 trust me I’m just waiting for them to open lol
100th from the UK.
Busy, didn't watch the video yet, but you NEED to rip my head off with this thing.
im pretty sure the ranger will dust the cob webs off that old chevstang's vagina
Backlash city Fishing I doubt that, lol.
I'm scared lol I would be too all that power something you haven't done chance of breaking shit.
#HUNTERBOIZ That shirt tho!!
You're flirting with disaster by not wearing your seat belt.
Safety...needs seat belts,seat cage and more... I have watched you for some time now.. every launch or pull . Watch your seat... you go back 3 to 4 inches. It's going to break.. I had a ujoint break @ well past 100+mph not fun.. you need some safety stuff..
Thank god the camera didn't pan down when he was driving his Stang or I fear we wouldn't have saw Hunter Tuned, we would have saw Hunter BONER. lol
Fucking "a" hunter we have to see this thing run at least a 9.99 this year lol...do you ever get kicked out of tracks for running to fast in that car!!!!
Wow I was super late on this video, stupid work
race the honda on 20 lbs vs this thing!!
First
Michaelwiththeredcivic listen here sir
Hell yeah bro. Im trying to get a transbrake on my 79 malibu. Its just money lol CHECK MY CHANNEL FOR G BODY ACTION
You didn't know what the clock spring wires were for makes me question everything you wire now
Didn’t work anyway 🤙
lol u should be scared cuz that cheap converter aint made for transbrakes its gonna break u need one of them million dollar transbrake converters
How is it not made for a trans brake? It has anti ballooning plate idk what else you need
transbrake converters are built a lot stronger for the abuse if its a cheap converter it will work until it grenades and why would u run a cheap converter anyways it wont hold over 600whp