THIS video is the one that just helped me with a couple questions I had. I've been making tumblers for 2 years, but I am new to the storyboard ones and like you, I've been watching a lot of videos and doing research. There's a lot of videos out there, but they didn't answer the 2 questions I had about the bottom cap, and the seal at the top. They were all vague, or didn't answer exactly what I needed. Your video did and was easy to understand and I am now confident I can finish the 2 cups I started, so thank you so very much.
Thank you. This other vid has people putting silicone over the openings where the water goes. I did this and let it sit for 2 days, and my glitter was still stuck to the sides... your technique is cleaner. Did it leak?
I LOVE your channel. I found you on Instagram first and quickly ran over here to learn. I'm so excited to be apart of the ride. Please keep it up 🙏🏽💖👋🏽😊
Ahhhhhh Diamonds is my jam! If I can use it, I do! You made this look so easy! I’ve never been interested in doing one of these but I just might have to order one and try it!
Just an FYI...the black part comes out of the best so you can epoxy that on then you can add more fluid to fill it with a syringe :) then you won't have the huge air bubble. If you can't pull them apart put in the freezer for a few mins and use pliers :)
Enjoyed this tutorial, Mayra! Your down to Earth dialogue always makes me smile. 🥰 Mayra: “who do I think I am?” Me (literally outloud to no one): “You’re the Martha Stewart of Tumblers!” 😂🤣😂 Love your channel, Mayra!!
Can you show how you apply the epoxy onto the cup please I’m new to your channel and I want to learn step by step on how to make a water slide tumbler cup and what tools to use to get started. Is it a cricket machine you use or printer for the water slide decal ?
Just finished watching your tutorial and was wondering after a year if the seal is still holding strong?? I’m about to make a snow globe for a graduation gift and want to make sure it stays with her for a while! Love your video, super easy to follow and will be referring back to it frequently throughout my process!
Hey love this is the one I use but be careful this is white they also have clear but this is the one i use www.amazon.com/Sheets-Inkjet-Water-Slide-Decal/dp/B01GVNI5PQ
Just watched your tutorial and I love everything about it!!! Kind of a Dumb question, but I’m curious. Can you use these storyboard tumbler for hot drinks or will melt the epoxy?Ty
I have a hogg that is epoxy coated and the heat doesn't bother it. I also leave it in the truck in the Texas heat and it hasn't ruined, however I try not to leave it in the truck for more than a night or full day.
Hey beautiful I love your work😍, but I did come across a technique that allows you to use clear waterslides on black tumblers. 1.) Pick image and flip it before printing. 2.) Clear coat 2 times and then spray matte white spray paint the in the spots that need a white background (not too much or the paper will get heavy, just enough to cover the image). 3.) One more layer of clear coat and let dry completely. 4.) Apply to tumbler as usual🥰
Absolutely LOVE your video. So clear, so precise, so easy to follow. I do have 2 questions though if you don't mind... I think you did do it, but I have to ask anyway lol... 1st question: Did you sand your tumbler? 2nd question: if I want to do a Pennywise themed cup would the waterslide be on white waterslide paper? I think it's yes but I doubt myself a lot lol..
This is so cute because that’s what me and my little brother call myself. Our mom passed when he was little and I am raising him so I kinda been the only mom he knows but he also knows I’m his sister so he says I’m his momster lol
Ok, so why epoxy to seal? wouldn't silicone provide a better seal? Im on a mission to make a few. just curious how the epoxy holds up so thin as a sealer and with the water and glycerin in there. thank you!
Hey Mayra, thanks again for this wonderful and detailed tutorial. I was successful in making it, however it seems afterwards my water level comes to halfway the cup size. Do you know why this is?
If you don't hot glue the hole above the screw in fully water can seep In. I like to hot glue it and then uv resin over it to make sure there are no holes. Hope this helps.
Hi! I just saw another video where the lady explained that you have to fill it completely and then she sealed it with silicone and let it dry. Finally she applied epoxy in order to glue the bottom part with the cup. She said that she does that to prevent evaporation.
There is a a product called Vinyl Shield. You can put it over vinyl or waterslide. Vinyl shield is dishwasher staff and it sold have issues with fading or bleeding.
Super old video, but great information here. Thank you so much for making this video!
You made this look so easy! Thank you for putting all the time and effort in to these tutorials for us. It means so much ❤️
My sweet and beautiful bestie! Thank you for your loyalty ♥️♥️♥️♥️
Not only ladies watch your videos lol . And gents love ur work
THIS video is the one that just helped me with a couple questions I had. I've been making tumblers for 2 years, but I am new to the storyboard ones and like you, I've been watching a lot of videos and doing research. There's a lot of videos out there, but they didn't answer the 2 questions I had about the bottom cap, and the seal at the top. They were all vague, or didn't answer exactly what I needed. Your video did and was easy to understand and I am now confident I can finish the 2 cups I started, so thank you so very much.
Thank you. This other vid has people putting silicone over the openings where the water goes. I did this and let it sit for 2 days, and my glitter was still stuck to the sides... your technique is cleaner. Did it leak?
This cup is gorgeous and I'm in love with your Grinch cup. Thanks so much for explaining things slowly.
Yay I just got my cups today and came to watch your tutorial so I know what to do lol thx boo ❤
I LOVE your channel. I found you on Instagram first and quickly ran over here to learn. I'm so excited to be apart of the ride. Please keep it up 🙏🏽💖👋🏽😊
Omg you’re so sweet love , thank you ♥️♥️ I’m in the middle of moving but I should have another tutorial up soon ♥️♥️
Always use Distilled water, less chance of mold appearing
Ahhhhhh Diamonds is my jam! If I can use it, I do! You made this look so easy! I’ve never been interested in doing one of these but I just might have to order one and try it!
Awww thank you so much my love! I can not wait to see what you make 😍😍
Thank you Mayra for doing another great tutorial you made it look easy Love all your work wishing you a positive happy life and day.
Just an FYI...the black part comes out of the best so you can epoxy that on then you can add more fluid to fill it with a syringe :) then you won't have the huge air bubble. If you can't pull them apart put in the freezer for a few mins and use pliers :)
Enjoyed this tutorial, Mayra! Your down to Earth dialogue always makes me smile. 🥰
Mayra: “who do I think I am?”
Me (literally outloud to no one): “You’re the Martha Stewart of Tumblers!”
😂🤣😂 Love your channel, Mayra!!
What’s the advantage of using water slides vs stickers?
Using a silicone brush like you used for the waterslide works too.
Did you do a full water slide tumbler I can’t seem to find it
I subbed, I love your personality and your courage to do this difficult project with us!
This is beautiful!! You rocked it!
Wow que padre! Ty for the tutorial Chula! 🥰🥰
Gracias corazon ♥️♥️♥️
I love this cup and it is so beautiful
Thanks for sharing! ❤ how many coats of poly acrylic did you use after applying the glitter?
Wow looks awesome 🤩
By far probably my favorite tutorial for storyboard. Have you done anymore since your nieces? How is this one holding up? Would love to see more.
did u sand at all& can u use uv resin instead of 2part epoxy& if u add glitter and or clay slices dry do u have2seal at all like the hole or the rim
Can you show how you apply the epoxy onto the cup please I’m new to your channel and I want to learn step by step on how to make a water slide tumbler cup and what tools to use to get started. Is it a cricket machine you use or printer for the water slide decal ?
Just finished watching your tutorial and was wondering after a year if the seal is still holding strong?? I’m about to make a snow globe for a graduation gift and want to make sure it stays with her for a while! Love your video, super easy to follow and will be referring back to it frequently throughout my process!
Can you tell me what's the best water slide paper to use
Hey love this is the one I use but be careful this is white they also have clear but this is the one i use www.amazon.com/Sheets-Inkjet-Water-Slide-Decal/dp/B01GVNI5PQ
love the decals!!!
Thank you ♥️
Ordering all my stuff can’t wait
How well does the epoxy hold up as the seal?
Is it still in good shape? No leaks?
Love it
Thank you ♥️
I love it!!! Thank you sooo much for this tutorial!! This definitely gave me a little boost to open the ones that have been sitting on my shelf. 😘
Awww you’re so sweet my love and thank you 🥰🥰🥰♥️♥️
Can you use something else other than epoxy to secure the lid ? I use crystalac brite tone I’m not sure if you’re able to use that to secure the lid
CrystaLac user. Try clear silicone for bathrooms. It with for me.
Where did you buy the cup for this video? Love this design too!
What Waterslide paper did you use? I struggle so hard with Waterslides! ugh. I feel like my printer doesn't like print it to where its dark.
Wished we saw it all done... And how it held up
What waterslide paper do you use?
Where u find those tumblers? So cute
Just watched your tutorial and I love everything about it!!! Kind of a Dumb question, but I’m curious. Can you use these storyboard tumbler for hot drinks or will melt the epoxy?Ty
I have a hogg that is epoxy coated and the heat doesn't bother it. I also leave it in the truck in the Texas heat and it hasn't ruined, however I try not to leave it in the truck for more than a night or full day.
Hey beautiful I love your work😍, but I did come across a technique that allows you to use clear waterslides on black tumblers.
1.) Pick image and flip it before printing.
2.) Clear coat 2 times and then spray matte white spray paint the in the spots that need a white background (not too much or the paper will get heavy, just enough to cover the image).
3.) One more layer of clear coat and let dry completely.
4.) Apply to tumbler as usual🥰
I use the technique on all my water slides. I makes it much easier to apply and also toughens up the waterslide so it doesn't tear easily.
Don’t you have to use distilled water? I loveeeeeed this. I’m ready to make some. FYI the story book cups are $3.75 on stainless depot right now!!!!
Do you think the expanding foam would work inside the hole instead of hot glue?
Absolutely LOVE your video. So clear, so precise, so easy to follow. I do have 2 questions though if you don't mind... I think you did do it, but I have to ask anyway lol...
1st question: Did you sand your tumbler?
2nd question: if I want to do a Pennywise themed cup would the waterslide be on white waterslide paper? I think it's yes but I doubt myself a lot lol..
Beautiful
Where did you get the grinch design I love it
Love this tumbler!! You didn’t link your info! Where did you get the water slide? What water slide paper do you use? Girl I need info!! 💕💕
This is so cute because that’s what me and my little brother call myself. Our mom passed when he was little and I am raising him so I kinda been the only mom he knows but he also knows I’m his sister so he says I’m his momster lol
Did you sand it first?
does the polycrylic not work on the water slide?
I know a lot of people use it, I personally like clear glaze by krylon
Mayra makes it! Thank you so much
Ok, so why epoxy to seal? wouldn't silicone provide a better seal? Im on a mission to make a few. just curious how the epoxy holds up so thin as a sealer and with the water and glycerin in there. thank you!
This is beautiful. I have trouble with my modpodge looking streaky. What do you recommend?
If you dilute it with water that helps
Do you epoxy over the water slide to?
What kind of epoxy did you use. Since some epoxy can't be in water too long.
What did you seal the glitter with.??
What kind of printer would I need to print waterslides? Can u leave a link
Hi how many times you put epoxy on the tumbler just one?
“Sound Ghetto”?????
Hi quick question! Did you spray your waterslide with the clear glaze? Does that help it stay?
Hi yes love I use triple thick crystal clear glaze by krylon. I do 3 solid coats ♥️♥️
Can you put all the products. Of what they are and where you got them. Or am i missing it
Did you have any problems with the water slide bleeding. Mine started to bleed after a week
Hey Mayra, thanks again for this wonderful and detailed tutorial. I was successful in making it, however it seems afterwards my water level comes to halfway the cup size. Do you know why this is?
If you don't hot glue the hole above the screw in fully water can seep In. I like to hot glue it and then uv resin over it to make sure there are no holes. Hope this helps.
Hi! I just saw another video where the lady explained that you have to fill it completely and then she sealed it with silicone and let it dry. Finally she applied epoxy in order to glue the bottom part with the cup. She said that she does that to prevent evaporation.
Hey boo! How did this tumbler hold up? 💙
Hi!! What water slide do you use?
Thank you for this. What printer do you use
You’re so welcome love. I use the canon G6020
What are you using to hold the cup? While glittering?🤔
Hi love it’s a sponge it comes with the tuner ♥️♥️
what epoxy do u use?
I use amazing clear cast , but I’m switching to midium viscocity by CCDIY
what kind of printer do you have of you dont mind me asking
What kind of printer do you use?
Hi I use a canon G 6020
I made one of these. I’m wondering how yours held up. After months the ink started to bleed has this happened in your experience?
I had the same issue when I used water slide it started to bleed
There is a a product called Vinyl Shield. You can put it over vinyl or waterslide.
Vinyl shield is dishwasher staff and it sold have issues with fading or bleeding.
I love this!!
What caused you to end up in the hospital..
The intense daily migraines that came along with inhaling toxic fumes
@@Mayramakesit thank you for sharing. I’ve been having skin problems and some chest issues and ….wondering if it was do to the epoxy
What water slide paper do you use?