Hi guys, Ezekiel the creator of these magazine adapters here. The talon magazines can actually also be pulled out directly without pressing on the extended release lever. It's a feature I've retained from the original worker adapter. Also, the universal adapter version CANNOT fit in XZeus2, that blaster's magwell is slightly different. My main product video is here. m.facebook.com/story.php?story_fbid=200139767596051&id=1697227683927950 Lastly, here's a Etsy coupon for my store. www.etsy.com/sg-en/shop/CreateWithEzekiel?coupon=SECRETDISCOUNTCOUPON
The universal mag adapter fits in my Xzeus 2, it just grabs the mag too tight for it to drop out freely. I have the same exact issue with Jet's official katana adapter.
Is the orientation more forward than the Worker adapter? I’m interested in running the DvZ hybrid pusher but it is designed to work with forward mounted short dart magazines. Cheers.
I filed down the notch in my talon mag adapter to make it very easy to take out. I haven’t had it fall out on accident to date. I’d still prefer a lever, but it works fine for me.
I think that the Universal might be of more use, but I'm still not sure. I'm sort of waiting for the Talons to get a bit more widespread before really dipping into that system, let people get more things figured out. I think that the 3D printed Katana options (especially the Vorpals) are doing pretty good for most of us.
I like ho the hollow sight clearly says “For law enforcement/military use” on it and yet he has it on a Neft blaster that you tag people with foam darts.
I think it's cheaper to mod the Worker adapter to have a mag release lever. It's solven welded but it's not difficult to pry open. The tricky part is to design a lever long & strong enough to pull the lock mechanism because the small spring is quite strong.
44sunsets Oh? What about slugs? I would say it still probably cheaper for most people to order one printed, than it would be to buy this one. $23 is really steep for a small part.
Was it just me or when you were showing us the breach all I could concentrate on was 'for law enforcement/military use' on his red dot? Please tell me if I'm not mad!
Hi guys, Ezekiel the creator of these magazine adapters here. The talon magazines can actually also be pulled out directly without pressing on the extended release lever. It's a feature I've retained from the original worker adapter. Also, the universal adapter version CANNOT fit in XZeus2, that blaster's magwell is slightly different.
My main product video is here.
m.facebook.com/story.php?story_fbid=200139767596051&id=1697227683927950
Lastly, here's a Etsy coupon for my store.
www.etsy.com/sg-en/shop/CreateWithEzekiel?coupon=SECRETDISCOUNTCOUPON
The universal mag adapter fits in my Xzeus 2, it just grabs the mag too tight for it to drop out freely. I have the same exact issue with Jet's official katana adapter.
Wish I’d of known about the coupon before I placed a order... oh well
Is the orientation more forward than the Worker adapter? I’m interested in running the DvZ hybrid pusher but it is designed to work with forward mounted short dart magazines. Cheers.
I’ve already ordered a CEDA specific adapter... nice to hear there not hot garbage.
I filed down the notch in my talon mag adapter to make it very easy to take out. I haven’t had it fall out on accident to date. I’d still prefer a lever, but it works fine for me.
Hopefully that holds up in the long term as the plastic wears down.
So will this adapter be able to make the small bullets fire out of any blaster? Could I use this for my stryfe?
I think that the Universal might be of more use, but I'm still not sure. I'm sort of waiting for the Talons to get a bit more widespread before really dipping into that system, let people get more things figured out. I think that the 3D printed Katana options (especially the Vorpals) are doing pretty good for most of us.
I like ho the hollow sight clearly says “For law enforcement/military use” on it and yet he has it on a Neft blaster that you tag people with foam darts.
I think it's cheaper to mod the Worker adapter to have a mag release lever. It's solven welded but it's not difficult to pry open. The tricky part is to design a lever long & strong enough to pull the lock mechanism because the small spring is quite strong.
Cheaper is relative. How long would it take you to mod? More than an hour of minimum wage? Could just buy one. Time has worth too.
Thanks for the review. May pick a universal up, saves me from getting rid of my Katana mags since the Talon are so easy to get.
Will you run a mixed loadout then?
Yes, that's my hope but we'll see how that goes.
Great video
Captain Slug and Tungsten both have 3D printed kantana/talon adapters that you can print.
Cool for people with printers. I ordered mine from Ezekiel because I don't have a printer.
LightningEagle14 Unfortunately Tungsten’s Talon adapter only works for Stryfe/RS, not springers.
44sunsets Oh? What about slugs? I would say it still probably cheaper for most people to order one printed, than it would be to buy this one. $23 is really steep for a small part.
Ok, I guess that is SGD not USD. It’s only 16 USD which is much more reasonable.
Awesome bet helpful, thank you.
Was it just me or when you were showing us the breach all I could concentrate on was 'for law enforcement/military use' on his red dot? Please tell me if I'm not mad!
I can not get decent performance out of my ceda
Jet have the Alpha RT kit available for preorder now. I'm hoping to get one soon to test.
@@BradleyPhillipsYT please share your thoughts. I have worker internals but it's performance is quite inferior to my prophecy.
That's because we don't have good springs for Ceda yet. Jet are releasing some long springs with the Alpha RT.