to all helicopter model flyers: MAKE YOURSELF A "GRILL LANDING PAD". The smaller the model, the bigger ground effect from the rotor you'll have. If your landing pad allows air flow through it, your model will have a much more "realistic" attitude near the ground....instead of getting upset due to it's own rotor wash.
What do you exactly mean with "grill landing pad"? Do you have any link about that? I've found only landing pads for self home drones and things like that.. (I am obviously a beginner)
@@Sahadi420 ah ok ok now is more clear! So its Like a bbq grille! And thinking of it it make sense. Sorry for my silly question and Thank you for your explanation!
You know what I thought wouldn't hurt and it's tiny compared to these, a drone blade. I should have figured it would cut me. But them fucking things almost cut my finger off. Had it been this heli I did that with, my whole arm hahaha.
You need to be further away from it when in flight. A friend of mine had a helicopter drop from 10 feet. Rotor blade went straight through his leg . He was alone with his 6 yr old son . In the middle of a field. Luckily his son fetched a dog walker . The guy was shocked when he said dads been hit buy an helicopter.
Flying my copters that close to the ground is very difficult due to ground effect. And very dangerous inside the house. If one blade even touch's something BAMM... I have spun mine up to check alignment or vibration (they need to be balanced exactly on a copter) But there is no way I would do so with my huge A109. Be safe . Do it outside.. if it's to cold, wait till it's warmer. Be safe, have a Merry Christmas...
It's flying heavy, and that's in ground effect. You may need different blades, or reduce weight. Moderate imbalance on the rotors which will stress the ESC. I heard you increasing head speed, and it was already high. Sort that headspeed/lift/weight issue. Don't want to lose the ESC mid flight with such a beautiful model.
I haven’t taken it for a big fly as yet, it’s heavy and esc get hot and I haven’t got around to installing some cooling fans to keep it cooler. I’m worried re the esc cutting out. Will get video outdoors and also close ups of pilot head, gun and cockpit, I used tinyscreen+ from tiny circuits in cockpit which plays video footage of actual Apache console, the detail adds extra realism.
your axle for rotors its in the center and you get shaking because of that, give that part to person who working on lathe machine and it will be fixed, or your rotors are not same size or weight
It’s on a switch, down, middle and up position. Using actuonix L12 -R Micro Linear Servo - 30mm - 100:1 - 6 volt, and my o n 3D printed hinges and control horns. I tried it on a mix and I didn’t like the way I had it mixed with elevator.
Careful with the wash inside or before you know it you will be selling it as cheap used and broken parts. I had a small one and like to freak the dog out but sometimes the wash would make it crash. Dope though! Be cool if they we actually jet engines on it!
Nice Big Boy Heli that's about as high as I would take it too as I'm still learning on my Syma107G. But at the beginning of this vid the sound didn't appear to be coming from this chopper but one with a jet turbine engine.❓ 🇺🇸
The Heli is electric but has a scale sound system in it with a speaker. It’s the actual start up of a real Apache, also has gun sounds and pilot talking etc. I did put other videos up showing all the detail, especially the cockpit and animated pilots, gun etc. I’ll be taking it out to fly when the weather cools down here in Australia. The Heli is heavy and runs a little warm on the esc.
KOOL👍👍 I WANT to one day do a RC helicopter video but with real heli sounds from it & the blades like on a Huey. I wonder why the Huey models are so hard to find? My guess is everyone wants the newer model choppers. Yours is the 1st I have seen like this Very Nice mate ❤ 🇺🇸
Pretty nice, although I detect a small misalignment of the main rotor shaft. Perhaps straightening would eliminate much resonating vibrations and instability.
Reason I did the short video was to do slow motion capture to identify how bad the main shaft is bent, clearly from factory it’s not straight at all hence required a new better shaft…
Je me demande s'il est possible de mieux équilibrer d'un poil le rotor, pour éviter les vibrations? En tout cas c'est beaucoup mieux que l'aspirateur pour faire le ménage dans son garage!
Thanks, it’s pretty nice and took a long time to build based on the Roban kit, lots of videos on my UA-cam showing the detail. Have flown much lately, it’s on display in my office 👍
www.modelsoundsinc.com/index.php Two speaker set up with helicopter sounds and I added my own machine gun and other sounds, it’s a good module and his new version is probably even better! Cheers
It takes a knack to be really good at it, but it’s easier today than it used to be. Go buy one of the tiny electric ones with simplified controls. Fly it until you’re good, don’t hit things, and understand the Physics. Then get a bigger electric one with an extra control added in. Repeat. Though at the higher levels, you’re spending thousands of dollars.
!! THIS makes up for the loss of the last-night-kebab I just vomitted in!!!! (Hope I don't vomit into my own throat in my sleep tonight... Either way, this Vid makes my last few minutes ****some ;) )
@@tiffanynicely2616 Thanks for rubbing it in, Tiffany (no, I don't have a flying toy helicopter). I cried for hours after reading your comment. I hope you're happy now.
to all helicopter model flyers: MAKE YOURSELF A "GRILL LANDING PAD". The smaller the model, the bigger ground effect from the rotor you'll have. If your landing pad allows air flow through it, your model will have a much more "realistic" attitude near the ground....instead of getting upset due to it's own rotor wash.
Yes . Think about why the Seal Team 7’s chopper crashed in Bin Laden’s compound . Same thing . Grid is genious.
What do you exactly mean with "grill landing pad"? Do you have any link about that? I've found only landing pads for self home drones and things like that.. (I am obviously a beginner)
@@Andre-ct6ss A landing pad that is made of bars, allowing air to pass through…instead of a flat surface.
@@Sahadi420 ah ok ok now is more clear! So its Like a bbq grille! And thinking of it it make sense. Sorry for my silly question and Thank you for your explanation!
@@matthewmattison7642 do really think a multi million dollar heli needs a grill to land on safely? lol
Thats a beautiful bird 🙂 If you didnt do it yet, you should look into balancing the rotor blades, I think that would help with the vibrations.
Christ, that looks terrifying indoors. 🤦🏻♂️
I was relieved when it landed and spooled down safely.
Beautiful model! I wouldn't have the guys to fly it in a garage though. 😱
Gorgeous scale Helicopter, awesome landing gear with suspension. I liked and subscribed. 😊
As Cool as those are, they scare me to death. Those blades are no joke
You know what I thought wouldn't hurt and it's tiny compared to these, a drone blade. I should have figured it would cut me. But them fucking things almost cut my finger off. Had it been this heli I did that with, my whole arm hahaha.
1:34 That moment you almost have dynamic rollover inside your own garage... lol
Awesome bird!
Absolutely beautiful
I wouldn't stand that close to it.
Are u ready son?yes sir, I'm ready
Beautiful man....lovin these big scale copters, thanks for sharin👊🏼👊🏼👊🏼👍🏼👍🏼
Cheers! Again I need to do some close ups and short videos of the details
You need to be further away from it when in flight. A friend of mine had a helicopter drop from 10 feet. Rotor blade went straight through his leg . He was alone with his 6 yr old son . In the middle of a field. Luckily his son fetched a dog walker . The guy was shocked when he said dads been hit buy an helicopter.
Two people in my state have been decapitated.
@@joshuasterling2144 bloody hell , I'll stick to rc crawling
@@madfrank7972 Cabon fiber blades on a 700 size 3d heli can kill you for sure.
nice vlog friend
I'm guessing that thing is capable of removing 'Limbs'. I like it.!
I was interested in these choppers, autopilot module exists for these. The 5V choppers serve as angle grinders, if desired.
Don't know if I like the way those Hellfires are dancing around on those pylons.
I am subscriber 473🇨🇦
It's a fraction of a fraction the size of the real thing, yet still sounds terrifying.
Anxiety level 1000 here lol
That thing is scaring the s out of me😬
Flying my copters that close to the ground is very difficult due to ground effect. And very dangerous inside the house. If one blade even touch's something BAMM... I have spun mine up to check alignment or vibration (they need to be balanced exactly on a copter) But there is no way I would do so with my huge A109.
Be safe . Do it outside.. if it's to cold, wait till it's warmer. Be safe, have a Merry Christmas...
Some balls doing that indoors, my luck, a tail servo would go out and destroy everything in the garage.
Very nice, but the main shaft is bent and can be seen at 2:46 causing excess vibration.
Majestic.
It's flying heavy, and that's in ground effect. You may need different blades, or reduce weight. Moderate imbalance on the rotors which will stress the ESC. I heard you increasing head speed, and it was already high. Sort that headspeed/lift/weight issue. Don't want to lose the ESC mid flight with such a beautiful model.
Video is 5yr old😂
@@tomoprime217 right, birds probably already in the trash. Not his fault youtube recommends this 5 years to late.
@@alexzharov5817 wait a tick, you don’t actually believe I waited 5 years for this moment? We all got the late notification right? Right? 😵🤣
Roban is the best
This is so cool like I'm jealous as fuuck 😂 I would torment my neighborhood if I had one of these as a kid for sure😂
No way I’d be anywhere near that meat grinder indoors! Beautiful bird but please be careful!
That's really awesome man looks epic nice 👍
Yea baby…go get those Commies
Wow that thing has some power
That thing is awesome!
Good looking helicopter! Any more videos of you flying outdoors?
I haven’t taken it for a big fly as yet, it’s heavy and esc get hot and I haven’t got around to installing some cooling fans to keep it cooler. I’m worried re the esc cutting out. Will get video outdoors and also close ups of pilot head, gun and cockpit, I used tinyscreen+ from tiny circuits in cockpit which plays video footage of actual Apache console, the detail adds extra realism.
@@rcaussie9382 Does the heli weigh more than 8 kilos?
I can tell this guy likes to gamble
Just say no to flying in your garage.
Very nice. I’ve got the roban airwolf 450. Haven’t set it up yet tho 🤦🏻♂️
When your friend wants to gun but there's another guy in the gunners seat.
I think the rotor blade needs some fine balancing.
your axle for rotors its in the center and you get shaking because of that, give that part to person who working on lathe machine and it will be fixed, or your rotors are not same size or weight
How’d you get your stabilator to work? Are you setting it up on a switch or a mix?
It’s on a switch, down, middle and up position. Using actuonix L12 -R Micro Linear Servo - 30mm - 100:1 - 6 volt, and my o n 3D printed hinges and control horns. I tried it on a mix and I didn’t like the way I had it mixed with elevator.
Nice build
Great now make the rocket pods shoot out bbs and you put a fpv. Camera on it and u got a attack helicopter for air soft games :)
Careful with the wash inside or before you know it you will be selling it as cheap used and broken parts. I had a small one and like to freak the dog out but sometimes the wash would make it crash. Dope though! Be cool if they we actually jet engines on it!
THIS IS DOPE!
Nice Big Boy Heli that's about as high as I would take it too as I'm still learning on my Syma107G.
But at the beginning of this vid the sound didn't appear to be coming from this chopper but one with a jet turbine engine.❓ 🇺🇸
The Heli is electric but has a scale sound system in it with a speaker. It’s the actual start up of a real Apache, also has gun sounds and pilot talking etc. I did put other videos up showing all the detail, especially the cockpit and animated pilots, gun etc. I’ll be taking it out to fly when the weather cools down here in Australia. The Heli is heavy and runs a little warm on the esc.
KOOL👍👍 I WANT to one day do a RC helicopter video but with real heli sounds from it & the blades like on a Huey. I wonder why the Huey models are so hard to find? My guess is everyone wants the newer model choppers.
Yours is the 1st I have seen like this Very Nice mate ❤ 🇺🇸
Beautifull ✌️ ✨
0:09 he hit his wax pen lol
Pretty nice, although I detect a small misalignment of the main rotor shaft. Perhaps straightening would eliminate much resonating vibrations and instability.
Shit on your own rotors then come back eh?
(lol)
2:46 "Shakira shakira!"
quiiiteee wobbly aint she
Reason I did the short video was to do slow motion capture to identify how bad the main shaft is bent, clearly from factory it’s not straight at all hence required a new better shaft…
I remember GTA vice City mission 🥲
Ukraine now needs some of thease 👁️🤔
Looks dangerous lol
bota essa bagaça pra voar
Keep practicing… you be able to fly one day!💪🏼😎
Did you get your ESC heating issue figured out? I am now using Kontronik ESC’s in my helis with no issue.
Freaking awesome
Je me demande s'il est possible de mieux équilibrer d'un poil le rotor, pour éviter les vibrations? En tout cas c'est beaucoup mieux que l'aspirateur pour faire le ménage dans son garage!
Well you can also maintain your lawn using this heli🤪
5 year ago this video ..
roban apache means apache gets stolen in spanish...
I got confused too
Классный вертолетик
smol apachi
It’s really too bad BBI went out of business. They had the best scale helicopters for these conversions
Do you think if you stuck your tongue out at the rotor it would hurt? Surely not that much
Nice stable flight well balanced 👍
Helicopter keren banget 👍👍👍
Thanks, it’s pretty nice and took a long time to build based on the Roban kit, lots of videos on my UA-cam showing the detail. Have flown much lately, it’s on display in my office 👍
Where did you purchase the sound module?
www.modelsoundsinc.com/index.php
Two speaker set up with helicopter sounds and I added my own machine gun and other sounds, it’s a good module and his new version is probably even better! Cheers
How much does it cost ?
Nice!
Wouldn't last 2 mins with me before we had a black hawk(apache) situation
Down
How hard is it to learn how to fly one of these birds
It takes a knack to be really good at it, but it’s easier today than it used to be. Go buy one of the tiny electric ones with simplified controls. Fly it until you’re good, don’t hit things, and understand the Physics. Then get a bigger electric one with an extra control added in. Repeat. Though at the higher levels, you’re spending thousands of dollars.
!! THIS makes up for the loss of the last-night-kebab I just vomitted in!!!!
(Hope I don't vomit into my own throat in my sleep tonight... Either way, this Vid makes my last few minutes ****some ;) )
The Wright Brothers stayed in the air longer on their first flight at Kitty Hawk. Just sayin'.
I see you don't even own anything that Flies just sayin
I don't recall the Kitty Hawk taking off three times while being flown indoors either...so good comparison.
I dont recall wright brothers flying indoors iether yea
@@tiffanynicely2616 Thanks for rubbing it in, Tiffany (no, I don't have a flying toy helicopter). I cried for hours after reading your comment. I hope you're happy now.
Comparing the worlds first ever aircraft with 2022 r/c technology. The world disappoints me
Wow
Jesus, get out of ground affect. Nice to see you can fly on the bubble but put the bird in the air..
Нельзя в помещении такой включать
I think that's as high as it gets!!🤦👎
I wonder how big the pilots are !
Sooo...sweeet...
🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏⭐💎⭐💎⭐💎⭐💎⭐💎⭐💎⭐💎⭐🌿🙏🌿🙏🌿🙏🌿🎄👏🎄👏🎄👏🎄👏🎄👏🎄👏🎄👏🎄👏🎄👏🎄👏👏🎄👍👍👍👍👍👍👍👍⭐💎⭐💎⭐💎⭐♥
what is Roban??? the outrigger landing gear at the rear of the tail section (below the rear tail rotor) just isn't there . . .
Roban is the company that makes the heli or makes the shell I think they make both but the body,also comes as a kit
Un stable
If true the flashlight would be a major fire hazard. You keep it.
nice
make it shoot explosive airsoft bbs
Hola 👋.
Cuál sería el precio y dónde se consigue algo de estos. Por favor si puede desirme
Круто
5 years later aint no way that thing wasnt crashed
Tenes el rotor principal, un poquito desbalanceado
How much cost à such lovely machine ?
around to $3500-$4000 USD but he told his wife it was like $400 bucks 🤔😅
A lovely thousands figure
😍😍😍😍😲😳👏👏👏
Demais...
Crashes a $3,000 helicopter flying around in a confined area. :)
can it go higher? 🤷♂
Install some 22lr barrel on it 😂
😎
One word......AMAZING 😱
GOT MY SUB BRO 🤪
it dont seem like a good idea to fly this indoors.
Hi what site? URL ok?
WHY..INSIDE?!
👀