Oh my goodness, thank you so much for committing to a particular product! Incredibly helpful. This is exactly the project that I was trying to cobble together information for, and you have it in one great video, thank you so much!
Of all the bird bath videos I've seen, yours is the best. Where do you get your molds? I really want to try this. Also, what size do you use for your bird baths? Thank you for sharing!
Love your videos and ideas. Just curious if I could put a piece of PVC pipe in the center to avoid having to drill the concrete later. Any advice would be helpful. Thanks.
Yes, you can add PVC in the casting. It may cause bleed through of one color to another if casting in multiple colors. If you are experienced in casting concrete molds, there is no reason not to try it.
Hi Mark, Clear coating definitely adds a richness and depth. The two colors I was working with for that area were brown tones: Buff and Brown. I didn't want to detract from a concrete statue which is a gray-brown I placed them next to. I did more sunflowers using brown for the "seed" area with a bright-yellow powder mix for the "floral" part the sunflower. I did seal them, making them a richer yellow. They look pretty cool. Anyway, I am going to use them on a short pathway approach to a cinder block and stucco pedestal I am working on. I am not quite sure when I will finish the video, but I hope you can watch it. The yellow and brown sunflowers should be at the end of the video when I show the pedestal and its final decorations. Thanks for watching and liking the video. Regards, Tom
I believe this may be the same seller, though I did purchase it from Ebay. However, the store is empty. Here is the best information I have on the mold I used: Statuarymolds.com Search on site: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick " By the way if you like vibrant colors, here is my link to casting multi-color cement molds: ua-cam.com/video/lkJGIEVhkG8/v-deo.html
I just came back to ask the same question. I've looked all over the internet for THESE MOLDS. Thank you, but it doesn't look like they are available anymore. 😒 That liquid color is also over $7 a bottle.
Just found your channel last night. Great video! Thanks for sharing this! Some great tips - especially the one using the fan! I had to laugh though because we have a massager from the 80's that's very similar to the one you used! It's been sitting in a closet for eons but will now have a useful purpose, even if it's not the one it was intended for! 😀
Hello Tom! I came across your channel while searching for DIY fountain ideas, and love your bird baths. I’d love to try making a sunflower one out of a pot similar to yours. What type of concrete colorant do you use and where did you purchase it from? Thank you ! New subscriber and love your water features.
Quikrete colorant is available at most DIY centers. In my area, I can find red, charcoal, buff, and terra cotta. If you want some really exotic colors, E-Bay and Amazon have sellers that offer them. Quikrete comes in a liquid, whereas many others are in a dry or powdered state.
Amazon.com : Betonex Sun&Moon Concrete Plaster Plastic MOLDS Stepping Stone Garden Path #S11 : Garden & Outdoor www.statuarymolds.com/stepping-stone-molds/sunflower-mold Pump: Amazon.com: PULACO 10W 160GPH Submersible Pump with 3.3 ft Tubing for Aquariums, Fish Tank, Pond Fountain, Statuary, Hydroponics, Water Feature, Indoor Fountains : Pet Supplies The terra cotta pot was purchased at Home Depot (dimensions are in the description). Early High Yield Strength Quikrete Concrete and colorant can be purchased at Home Depot or Lowes. (The yellow colorant was purchased in powder form on Ebay, the only place I could find it, at that particular time.) The cement blocks were purchased at a DIY Center. I believe either HD or Lowes will have what you need. Stopper: 12 Pack - CleverDelights Solid Rubber Stoppers - Mix Pack | Sizes 000 to 10 | 1 Each Per Size: Amazon.com: Industrial & Scientific
Beautiful!🥰 I want to make one for a birdbath like you did! Do you think it would work to put a short price of PVC pipe in the middle while I am filling it with concrete so I won’t need to drill a hole in the middle later?
@@curiouslass4280 Cut the PVC and place it in the mold where you intend for it to be. If it lays flat, that's great. If you feel you could pour one color and let it set and add another color without knocking the pvc cutting around while adding the second color mix on top of the first, then you are good to go. Best wishes on your project!
Hi Tom, I recently founded your channel. I love this and I want to make the birdbath. Do you use the same mold depth for the birdbath as you do for the stepping stones? I just want to make it for the BB. Also, do you think I can use a terra cotta plant saucer if I cant do the casting mold?? Thank you Arelis( using husband's computer)
Thanks for the simple and easy to understand video! I was thinking of using this tutorial with your birdbath tutorial. Do I have to let the stepping stone cure for a couple of weeks before using with the birdbath?
I did both a Sunflower and a Sun & Moon. I'm glad you like the look, thanks. The Sun & Moon: Amazon.com : Betonex Sun&Moon Concrete Plaster Plastic MOLDS Stepping Stone Garden Path #S11 : Garden & Outdoor Here is the information for the Sunflower: Ebay Stepping Stone Mold 15" Sunflower. Seller: Statuarymolds
I found it and ordered one. I like your bird water idea and I think it will be good for honey bees as well/ Im a bee kepper. I found a woman who builds these in a big bucket under ground and runs the bubble across rocks on top. Im going to use your idea with rocks on top and water down below. Thanks for the cool idea! what ya think - www.amazon.com/gp/product/B07XRLKR7G?ref=ppx_pt2_dt_b_prod_image
@@campdavidsonfunctionaltrai8583 You will not be disappointed. I have three fountains and a natural beehive is in my yard. They drink more than the birds but a lot less in quantity.
Quikrete Cement Colorant. It colors all of the cement in the concrete. What is nice about using colorant is that when the concretion, or in this case the sunflower, either chips or wears down, the colorant is embedded throughout the cement. Therefore, it retains its dyed color and does not reveal gray cement as would chipped or worn-out paint. Here is where brown colorant is added to the water prior to mixing it into the concrete where it will color all the cement in that mix: 1:50 (around one minute fifty seconds of this video)
Sunflower mold: I believe this may be the same seller, though I did purchase it from Ebay. However, the store is empty. Here is the best information I have on the mold I used: Statuarymolds.com Search site: Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick By the way if you like vibrant colors, here is a link to casting multi-color cement molds: ua-cam.com/video/lkJGIEVhkG8/v-deo.html
@@doityourselferhomeandgarde9732 Thank you. They come in different thicknesses, which one do you recommend? Does it make a difference how thick the plastic itself is? Also, does the color deepen later, or is the one in this video more subdued than the one you did for the birdbath video?
Great video!! In the "Making a Recirculating Bird Bath" video ( ua-cam.com/video/CHLLTvKY-lw/v-deo.html ) I believe you had a sunflower cast with 3 colors. That must have been quite the process.
Inspiring the yard artist (and bird angel) in me. Those birds are so lucky to have you around🌞
You are so kind
This was really great thanks. We watched your video about building a water bath/fountain and which led us here. Really great job explaining everthing.
Oh my goodness, thank you so much for committing to a particular product! Incredibly helpful. This is exactly the project that I was trying to cobble together information for, and you have it in one great video, thank you so much!
Glad it was helpful!
THANKS SO MUCH FOR THE COLOR INFORMATION.
No problem 😊
Of all the bird bath videos I've seen, yours is the best. Where do you get your molds? I really want to try this. Also, what size do you use for your bird baths? Thank you for sharing!
Statuarymolds.com
Search: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
Thanks for a nice comment
Large sunflower mold costs $70. Nice but way out of my price range.
So pretty
Never saw this done before. It was interesting and fun to watch. Really pretty yard art Tom. And your garden is sure looking beautiful.
Thanks for watching and the nice comment. Have a great day!
Another great demo. Nice work. Thank you!
Thanks again!
This too is very nice. You are a good teacher! I will think about doing something like it as well. Thank you!
Thank you so much!
Great idea, and tutorial. Love your water feature there ♥
Thanks so much 😊
I’m so glad I discovered your channel !! Wonderful, very informative how to videos !!
So glad! Thanks for watching
Thanks so much.
Just found your channel. Thanks for all the great instructions! I will definitely be making one of your bird baths. These are beautiful!!!
Awesome! Thank you!
Love your videos and ideas. Just curious if I could put a piece of PVC pipe in the center to avoid having to drill the concrete later. Any advice would be helpful. Thanks.
Yes, you can add PVC in the casting. It may cause bleed through of one color to another if casting in multiple colors. If you are experienced in casting concrete molds, there is no reason not to try it.
I wonder if clear coating them would bring out the color. Great video btw. I think I might have to try this.
Hi Mark,
Clear coating definitely adds a richness and depth. The two colors I was working with for that area were brown tones: Buff and Brown. I didn't want to detract from a concrete statue which is a gray-brown I placed them next to. I did more sunflowers using brown for the "seed" area with a bright-yellow powder mix for the "floral" part the sunflower. I did seal them, making them a richer yellow. They look pretty cool.
Anyway, I am going to use them on a short pathway approach to a cinder block and stucco pedestal I am working on. I am not quite sure when I will finish the video, but I hope you can watch it. The yellow and brown sunflowers should be at the end of the video when I show the pedestal and its final decorations.
Thanks for watching and liking the video.
Regards,
Tom
I just found your site. Where did you get the sunflower molds at. What a great idea
I believe this may be the same seller, though I did purchase it from Ebay. However, the store is empty. Here is the best information I have on the mold I used:
Statuarymolds.com
Search on site: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
By the way if you like vibrant colors, here is my link to casting multi-color cement molds: ua-cam.com/video/lkJGIEVhkG8/v-deo.html
I just came back to ask the same question. I've looked all over the internet for THESE MOLDS. Thank you, but it doesn't look like they are available anymore. 😒
That liquid color is also over $7 a bottle.
@@barbarat5729 I just found them on ebay
@@kathyhershey5384 OK but why didn't you include a link?
Just found your channel last night. Great video! Thanks for sharing this! Some great tips - especially the one using the fan! I had to laugh though because we have a massager from the 80's that's very similar to the one you used! It's been sitting in a closet for eons but will now have a useful purpose, even if it's not the one it was intended for! 😀
Welcome!
Hello Tom! I came across your channel while searching for DIY fountain ideas, and love your bird baths. I’d love to try making a sunflower one out of a pot similar to yours. What type of concrete colorant do you use and where did you purchase it from? Thank you ! New subscriber and love your water features.
Quikrete colorant is available at most DIY centers. In my area, I can find red, charcoal, buff, and terra cotta. If you want some really exotic colors, E-Bay and Amazon have sellers that offer them.
Quikrete comes in a liquid, whereas many others are in a dry or powdered state.
It would be nice if you’d share the links where to purchase the items you used.
Amazon.com : Betonex Sun&Moon Concrete Plaster Plastic MOLDS Stepping Stone Garden Path #S11 : Garden & Outdoor
www.statuarymolds.com/stepping-stone-molds/sunflower-mold
Pump: Amazon.com: PULACO 10W 160GPH Submersible Pump with 3.3 ft Tubing for Aquariums, Fish Tank, Pond Fountain, Statuary, Hydroponics, Water Feature, Indoor Fountains : Pet Supplies
The terra cotta pot was purchased at Home Depot (dimensions are in the description).
Early High Yield Strength Quikrete Concrete and colorant can be purchased at Home Depot or Lowes. (The yellow colorant was purchased in powder form on Ebay, the only place I could find it, at that particular time.)
The cement blocks were purchased at a DIY Center. I believe either HD or Lowes will have what you need.
Stopper: 12 Pack - CleverDelights Solid Rubber Stoppers - Mix Pack | Sizes 000 to 10 | 1 Each Per Size: Amazon.com: Industrial & Scientific
Beautiful!🥰 I want to make one for a birdbath like you did! Do you think it would work to put a short price of PVC pipe in the middle while I am filling it with concrete so I won’t need to drill a hole in the middle later?
Do you have a mold, concrete and colorant? And how many colors do you intend on using in the casting?
@@doityourselferhomeandgarde9732 yes. I have a mold and plan on using 2 colors.
@@curiouslass4280 Cut the PVC and place it in the mold where you intend for it to be. If it lays flat, that's great. If you feel you could pour one color and let it set and add another color without knocking the pvc cutting around while adding the second color mix on top of the first, then you are good to go.
Best wishes on your project!
Love these sunflower stepping stones and plan on making them. I was wondering if I can use Krylon fusion all in one paint and primer to color them.
I have not personally used that application.
Could you please include information on these molds in your description with a link to find these molds online? Thank you!
satuarymolds.com
Yes, yes yes !!
Where did you get the molds??
Statuarymolds.com
Search: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
Could you place a tube in the middle during the pour for the bird bath ones instead of drilling later or to decrease the amount of drilling needed?
Been asked that same question. I've responded to it in the comments
Where did you get the sunflower molds.. just love them so much. I would b a beginner. Thanks for yr. Video.
Statuarymolds.com
Search: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
Hi Tom, I recently founded your channel. I love this and I want to make the birdbath. Do you use the same mold depth for the birdbath as you do for the stepping stones? I just want to make it for the BB. Also, do you think I can use a terra cotta plant saucer if I cant do the casting mold?? Thank you Arelis( using husband's computer)
Yes and yes. Thank you for watching
Loved your video !! But where can I get the Sunflower Molds ??
www.statuarymolds.com/stepping-stone-molds/sunflower-mold
Thanks for the simple and easy to understand video! I was thinking of using this tutorial with your birdbath tutorial. Do I have to let the stepping stone cure for a couple of weeks before using with the birdbath?
Yes. Concrete is sufficiently cure after four weeks.
@@doityourselferhomeandgarde9732 thank you for the reply!
Neat❤
You had me hooked on solid from beginning to end! Going to have to try that! Thanks for taking the time to share this~ : ) Stay Well!
Awesome! Thank you!
How long do you need to wait after casting the concrete sunflower before you can drill the hole in it and use it in the water feature?
About 4 weeks, depending on the concrete you use and temperatures it cures at. The bag of on concrete should let you know.
I just want to buy the flower? Anyplace
Hello again, I would like to do a yellow sunflower but having trouble finding a reasonably priced dye. Where did you get your yellow? Thank you.
E-Bay and Walmart sell yellow colorant for concrete.
I love this idea and your video. Where do I purchase molds for this, please?
Statuarymolds.com
"Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
Love it. Where did you get the mold?
Statuarymolds.com
Search: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
Very nice ,where did you buy your molds🌹
Statuarymolds.com
"Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
I really like this mold. Can I ask... where did you get it?
I did both a Sunflower and a Sun & Moon. I'm glad you like the look, thanks.
The Sun & Moon: Amazon.com : Betonex Sun&Moon Concrete Plaster Plastic MOLDS Stepping Stone Garden Path #S11 : Garden & Outdoor
Here is the information for the Sunflower: Ebay Stepping Stone Mold 15" Sunflower. Seller: Statuarymolds
Where can I get the sunflower molds?
www.statuarymolds.com/stepping-stone-molds/sunflower-mold
Where do you purchase your molds?
Here's a link to where I purchased the sunflower: www.statuarymolds.com/stepping-stone-molds/sunflower-mold
Thank you for watching! 😁
where did you buy the Sunflower Casting Mold?
Statuarymolds.com
Search: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
I found it and ordered one. I like your bird water idea and I think it will be good for honey bees as well/ Im a bee kepper. I found a woman who builds these in a big bucket under ground and runs the bubble across rocks on top. Im going to use your idea with rocks on top and water down below. Thanks for the cool idea! what ya think - www.amazon.com/gp/product/B07XRLKR7G?ref=ppx_pt2_dt_b_prod_image
@@campdavidsonfunctionaltrai8583 You will not be disappointed. I have three fountains and a natural beehive is in my yard. They drink more than the birds but a lot less in quantity.
What kind of paint are you using?
Quikrete Cement Colorant. It colors all of the cement in the concrete. What is nice about using colorant is that when the concretion, or in this case the sunflower, either chips or wears down, the colorant is embedded throughout the cement. Therefore, it retains its dyed color and does not reveal gray cement as would chipped or worn-out paint.
Here is where brown colorant is added to the water prior to mixing it into the concrete where it will color all the cement in that mix: 1:50 (around one minute fifty seconds of this video)
Where do you get the molds
There's a link in the video's description
What is the name of the colorant you are using?
Quikrete liquid colorant--brown and buff
Where did you get the molds?
Sunflower mold: I believe this may be the same seller, though I did purchase it from Ebay. However, the store is empty. Here is the best information I have on the mold I used:
Statuarymolds.com
Search site: Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick
By the way if you like vibrant colors, here is a link to casting multi-color cement molds: ua-cam.com/video/lkJGIEVhkG8/v-deo.html
@@doityourselferhomeandgarde9732 Thank you. They come in different thicknesses, which one do you recommend? Does it make a difference how thick the plastic itself is? Also, does the color deepen later, or is the one in this video more subdued than the one you did for the birdbath video?
Great video!! In the "Making a Recirculating Bird Bath" video ( ua-cam.com/video/CHLLTvKY-lw/v-deo.html ) I believe you had a sunflower cast with 3 colors. That must have been quite the process.
Thank you, Tex
Where did you get the molds?
Statuarymolds.com
"Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
:-)
where do you get the molds???
Statuarymolds.com
Search: "Large textured Sun Flower Stepping Stone mold. Measures 15" x 2" thick "
Where did you get the molds?
Check the description.