On the new elite jolts The pin that holds the plunger head on, you can heat it up on like a stove and you should be able to pull it out and swap it for an actual screw
For anyone trying to remove the spring of a Jolt Elite: I managed to do it by resting my soldering iron on top of the metal bit for 2 or so minutes and then it pulls off very easily, it can be then put back on with a little force.
Shouldn't have to take every gun that exists apart though, should just be able to measure the spring, then find another of a similar size that's thicker or got more coils
The shorter the spri g the more powerfull coz you xtreching it more get some spri gs cut to see how much power u get when pull back at end of dart use a scewr it like pin
justajolt Have you considered using the zombiestrike double shot you know that hammer primed two shot? Supposedly it is slightly better than a jolt. You could guess it's a bit more able to take a spring upgrade
Noah Crain When you take the plunger out, does it have a piece of metal obscuring the screw to remove the plunger head (as you would be able to see on older plungers)?
![[Mod Guide] Pocket-size Nerf Blaster with 130fps velocities](http://i.ytimg.com/vi/3b_vypk8H9w/mqdefault.jpg)
Ive had a same jolt for like 8 years now, it still works fine
Me too
On the new elite jolts
The pin that holds the plunger head on, you can heat it up on like a stove and you should be able to pull it out and swap it for an actual screw
This guy is single handeldly the best comedian on UA-cam
What i do is yank the thing out with the might of zeus.
What kind of fps would I get from a worker hammershot spring
For anyone trying to remove the spring of a Jolt Elite:
I managed to do it by resting my soldering iron on top of the metal bit for 2 or so minutes and then it pulls off very easily, it can be then put back on with a little force.
Shouldn't have to take every gun that exists apart though, should just be able to measure the spring, then find another of a similar size that's thicker or got more coils
How do you do a sling a addition you make it look easy.
ua-cam.com/video/fVCP6VmFs3o/v-deo.html
Wait, so how do you put a spring on the elite ones
ua-cam.com/video/fVCP6VmFs3o/v-deo.html
justajolt Alright, thanks for the reply! I've been trying to figure that out for a while now.
Honestly, my understanding is that it's too hard to get the metal caps off from the tops of the screws to be worthwhile. Start with an older jolt ^_^
You rip it out and replace it with a screw. I can't guarantee it'll work tho
@@justajolt I wish I did I used the spring of the folding rebels jolt and damm it slaps hard
Two questions. What's the advantage of taking them dart rod out? And should u take the the original spring out of just add another spring? If so why?
if u have 2 jolt springs in 1 jolt then u will get twice the power of a jolt. if u replace the spring the the stock spring will be a waste
You won't get double performance from doubling the stock springs but you will get a boost
The spring wont pull back if theres two. Thats why you put in one strong one
you can run half length darts and fulll lengths,ez way to increase fps with half length darts
Any performance increases if you remove what's left of the air restrictor?
It felt better leaving it on mine but i dont have a chrono
Just nodded the newer jolt n-strike elite model with a triad spring it was a pain in the but, but I got it
I use the recon v2 internal spring
I used a Tek 6 Spring on my ZedStrike one that I gotten cheap. it works good
How do you do it to an elite jolt
i took out the air restrictor
Extended draw +2x jolt spring gave me 70 fps average with a high of 79
did you find it was consistent?
justajolt yes and it fires 70-80 feet angled
Might do a guide on how to make one
What's the names of both the springs name(specifically)
Cut three spring join them together
The shorter the spri g the more powerfull coz you xtreching it more get some spri gs cut to see how much power u get when pull back at end of dart use a scewr it like pin
yay someone else who uses hammer and chisel
The simplest ways are the most fun ^_^
1 and 2 < 3 Glad I could help!
justajolt 5 k subs anything special candy
justajolt Have you considered using the zombiestrike double shot you know that hammer primed two shot? Supposedly it is slightly better than a jolt. You could guess it's a bit more able to take a spring upgrade
how do i screw my jolt plunger head off
Mesure spring diamiter with vernia gage byof net thicker spring cheap more powerfull than regulsr springs
That can not be a Quincy didn't that you name has jolt in it 🙈
got a brand new stinger jolt for €10
Heck YES!
in Lidl thanks for replying also got a brand new stampede for 40 euro
Well played! Jealous I don't live where you are!
Justin McCarthy how nstrikes no longer solled on store shellvs
#joltsurgery
I did this and it just made it slower LOL
make one that gets 80+ fps, and we'll talk :)
britnerf.co.uk/Jolt_spring_test_Prochrono_data_about2680.html
justajolt okay, I am officially impressed. Good job. These are with N-strike (orange) jolts, right?
Nick Vanderplop Yep! The old ones ^_^
justajolt I've got an orange jolt(US) that has the new plunger, I haven't been able to find any info on how to take it apart, do you know?
Noah Crain When you take the plunger out, does it have a piece of metal obscuring the screw to remove the plunger head (as you would be able to see on older plungers)?
Dat 1 dislike tho
They meant to click like!
Filming on a see through table and then wondering why it won’t focus. 🤣🤣😠😠