Great vid. I'm looking to mod mine. Just a friendly note - at 2:42 the lower burner math says 0.9 mm = 0.35" it should read 0.9mm = *0.035"* ? haha. That was throwing me off. Thanks for sharing.
having good results? can't believe i got this without realizing they don't have a specific kit. thanks for the vid. hose isn't in stock. any 3/8 connection hose do?
Yup, works great. I might swap out the chip burner with a smaller orifice but so far, works great. Yeah, if you look on ebay for natural gas hose, you'll find ones that will work.
@@roberthenry6163 swapped both and went with the smaller for the chip burner. working well. temp control is still a work in progress but i'm fairly new to smoking
Great vid. I'm looking to mod mine. Just a friendly note - at 2:42 the lower burner math says 0.9 mm = 0.35"
it should read 0.9mm = *0.035"* ? haha. That was throwing me off. Thanks for sharing.
Ha, sure enough. I can't believe I said the right number when the wrong one was written down. 🤦♂️ Good catch.
having good results? can't believe i got this without realizing they don't have a specific kit. thanks for the vid. hose isn't in stock. any 3/8 connection hose do?
Yup, works great. I might swap out the chip burner with a smaller orifice but so far, works great. Yeah, if you look on ebay for natural gas hose, you'll find ones that will work.
@@tgraham360 well i assembled it before i realized the swap was necessary. those four screws you refer to is that just for the heating element?
@@caltown79 Yep, just the four screws and that whole bottom piece with the two burners will come off and expose the orifices.
@tgraham360 did you swap out the chip burner orifice? What size did you use, and did it help?
@@roberthenry6163 swapped both and went with the smaller for the chip burner. working well. temp control is still a work in progress but i'm fairly new to smoking
Do you have links to hose and orifice kit you used
You bet, I just posted them in the video description.
No, propane is at a higher pressure than natural gas.