How to Install peel n stick underlayment for a roof deck Palos Verdes Roofer
Вставка
- Опубліковано 17 жов 2024
- Hi Welcome back to Cover That Roof. It's time With tips and tricks of the trades. In today's eposide, we will show you how to install peel-n-stick underlayment for deck roof . The installation of the peel n stick underlayment for a roof deck is same identical process we would use on any deck or roofing surface for a flat walking deck or a roofing surface for a tile roof during waterproofing period. There are alot of different ways to install the peel n stick underlayment/ this was the easiest way to show the viewers how I would get it done. This video will show the all the steps and tricks and tips of the trade to get it done. If you are looking for a roofing contractor in your area make sur ethey are a licensed roofing contractor with all the proper insurances. If you live in the south bay you should call True American Roofing Co. Inc. I hope you enjoy these roofing video series. If you like the video hit like and subscribe. Look for us on our next up coming eposides of Cover That Roof. until next time we will see you in a bit. Cheers
I read the instructions on the box and it says to prime the wood with asphalt primer. I couldn't find it at HomeDepot or Lowes but I found it on Amazon. It goes on easy like paint and dries quickly. It makes the roll roofing stick a lot better.
Wonder how many times this dude has watched his own video..
Hey can you tell the product your using for the peel and stick the exact name and will this work with roofs with a lil pitch on both sides
Wayne's World doing roofing 😂
😂😂
Party on Wayne
I have a roof in CT that looks flat to the eye and is a black 10 ft seams wide material covered with a layer of pea sized rocks. It is completely drained after a rain in about 2 hours, and completely dry after 4-6 hours. What peel and stick product will work on this? Most contractors that have looked at the roof have no clue. I want to strip it down, replace any bad plywood than use a peel and stick application only, (no fumes allowed). Any advice from anyone is much appreciated. Thanks
Love your videos for ever
Thank you for your video.
Questions:
1) After the peeling and stick, do you need to nail it?
2) How do you install the second roll, overlap or side-by-side to the first roll? If overlap as needed, how many inches?
What is the name brand of what's being put down here? What's going to be applied next? (maybe I'll see in a minute...) thanks for vdo.
This is good over wood? Any final product like this for under solar panels?
No it not good over bare wood! You're supposed to use a nail base first so the material can be tore off once the time comes
What goes on top of this initial layer of underlayment? A laywer of thick, permanent peel & stick rolled roofing material?
Bruh... wasnt he in Bill and Ted's Excellent Adventure? Enjoyed the tips
I can't drive 55, nails, rock and roll brother
Hey What brand of underlayment was used??
Dose it sticks on the flashing part which is metal? Thank you
Not very well unless you use primer on the metal. This guy is a bum tho. Do not take this wingnuts videos to heart
When did Rod Stewert start doing roofs?
😅🤣😂🤣😂
He’s very enamored with his hair.
You made a cool video
didnt use any primer with the peel n stick?
Alex Odonnell no need
@joecee67 it’s a tar product, it sticks to plywood nicely no need for any primer
@@hercg1967 its NOT supposed to be in contact with the bare roof deck at all!!! Slap yourself
@@ArnoldandSonsExteriors that is where you are wrong. There is no problem that membrane is in contact with the plywood underlayment.
Damn wish my roof had that low of a pitch lol mines 12/12. But it’s better for the longevity of the shingles and has less chance of ice damming
Wait until you have to pay somebody to roof that steep pitch. LOL
You never would have got your nail off inspection less that fascia was on and plywood nailed to it
Is this guy Jon von Jovi’s cousin?
what is that first black sheet layer that you put on top of the plywood?
David T. That is self adhere base application which he should of used asphalt primer to adhere properly to the plywood.
@@floyddiaz257 you're wrong. The self adhering base sheet is not supposed to be on the deck at all!! There is a nail base that is supposed to installed first so the material can be tore off when the time comes. This video should be taken down because its showing uneducated ppl how to void all manufacturers warranties and the wrong way to install self-adhearing roofing products on low slope roofs. Slap yourself
Is this Garth from Wayne's World?
Its party time.. It's excellent 😁😁
She will be mine, oh yes she will. Heather be thy name.
Nice i prefer single ply roof tpo or PVC
Why?
Rain in PV?
Hey you mean hodad... love the vid!!! Yup, surfers rule.. If anyone tries to hang ten on your nose, hang five in their face!
Tim Curtis
why are you nailing the membrane. Will puncturing the membrane not be a source of water penetration? how do you terminate the membrane? and why no upwards termination at the ends shown??
QUASSIM KANTAWALA word is that the peel and stick underlayment is self sealing.
Everyone have their own interpretation of self sealing.... you should take time to read the astm standard.
Roofing gravel washed down from rain can puncture the tin foil(thin aluminum) peel and seal, if walked on. my roof leaked until I discovered this and brushed off the peal and seal and sealed these pin size holes. Not thick enough.
Hi Jerry, I saw your comment on Peel & Seal. It's word for word with this one. Hmmm.....
YOU MR. ARE TOO COOL TO WORK. MAN NOW I FEEL LIKE GETTING MY VIDEO CAMERA AND RECORDING MYSELF AS I DO THE WORK. DUDE YOU ARE TOO COOL TO BE ON CAMERA. I AM STOKED.... DUDE! DUDE! MAN OH MAN JUST TOO COOL, MAN YOU ARE COOL! TOO COOL JUST TOO COOL.............................DUDE DUDE ! YOU ARE COOOOOOOOOOOL.....
Why are you using 3 in framing nails to nail down your sheathing? Use 2" brother. You wont be waisting time pounding the wrong nails in.
Good video. Thanks.
Movave video editor is inexpensive, easy to use, and effective.
Why doesn't someone design a nailer that sets properly with enough oomph to get through any type of wood used, with some kind of a mechanical stop? Seems dumb to rely on force "balancing" for set, since density, etc. will change all over the roof. This looks about 100X better than tar paper. Who makes a good reasonably priced product that would work well for a "fiberglass" shingled roof? Thx.
I watched the installation the manufacture(polyglass) that I am going to use in my flat roof. Definitely the company gave instructions how to handle the products, safety and *tools needed. There is a new technique technology called "cold process"( not torch fire required) that uses 3 membranes(Sheets) (Elastobase, Elastoflex SA V and Polyfresko SA G) to lay on flat roof. 1st layer Elastobase SBS- attached to plywood 2nd layer elastoflex SA V- Smooth membrane3rd layer Polyfresko SA G- Granular membrane.I already filed a permit and submitted plan review. It is going to be my first re-roofing installation.* where are the tools? 3-4" hand roller and 80lbs lawn roller for pressing the sheets, your workers press their feet at the seams.
I recommend single ply roof there is a lot brands Firestone Carlisle JM all them make TPO and PVC (PVC) membrane is grease resistant) TPO manbrane not
The first layer should not be stuck. because the decking and membrane move at different rates.
Wrong, it should be fastened to the underlayer what so ever as long the membrane exposed. If you gonna have a green roof, with grass on theb you don't have to because of the weigth of the soil.
why was the roof not primed prior to installation?
Becasue it sticks good to wood without primer
It's Michael Douglas in another timeline.
If you are looking for a roofing contractor, make sure they are licensed, insured but also FOLLOWS THE MANUFACTURER'S INSTALLATION PROCEDURES and PROVIDES SAFETY for their roofers.
Take the knot out more pressure
No Shoes
No Shirt
No Dice
Safety Safety Safety!
Where is the safety harness ?
Man he really loves himself...*hair flip* smh
5:00 ese se parese al plebe de culiacan lol before he was famous and then dead
You didn't put the fascia on yet? You're fired
Somos latinos
AY ALGO MAS QUE SE PONGA EN LA MADERA ENTES DEL PEEL STICK POR SI ACASO SE PASA EL AGUA?
lol..The Golf Ball was helped anyone could see that ,,shyt,,roofers crack me up..The big rip off..
Set that air compressor for the nailgun correctly. No homeowner wants people using a hammer.
Why not put tar paper on roof deck first then put peel and stick on top of tar paper ? Otherwise , if you have to repair or reroof in the future you will have a very difficult time getting the peel and stick off the wood roof deck !!!
dayofhappiness good idea never thought of it I will take that into practice next time
I Live in florida. Inspector says remove all shingles & nails etc..peal & stick good enough too shingle over in.future.
Don't wont hurricane force winds lifting peel & stick
so blow off with the felt paper ...peel n seal always goes on the wood
dayofhappiness
It's designed to adhere to the roof deck
Garth from Wayne’s worlds dad
Far out man
You can hear the compressor constantly running. Slow the fuck down and let the compressor catch up and you won't have to go behind and hand nail ...
How many fuckin nails is he gonna put in each trust.. Holy Fuck!!
Materials is only as good as the person who do the work
I hear a lot of "we" and "we're". Lol
wish i had his hair..
your doing it wrong....lol. And your hammer is upside down, there is a special holder on your pouch that holds your hammmer ....😁😁😁
You guys well need training roofs installation!bad
You need to learn proper English
these guys dont know how to swi g a hammer lol
So much wrong here
Yea brah
Quit fixing your hair. We're here for the roof
this aint worth a shit
Ahhh Joe, cannabis is not your friend.
Thousands of lifetime projects with woodglut plans.