Infinity IF15 Clutch maintenance and building tips by Jilles Groskamp

[@rasmusaskrot9627]

Good tips, just bought a if14.2 locking good so far 👍

[@nicoperez73]

Very usefull videos Jilles, thanks

[@Hlin2023]

Hi Jilles
Is there a reason you pay the shims in front of the clutch spring nut, it’s different from the original if15 manual

[@kelbo1805]

Can you let me know where to buy the gears on that clutch first and second

[@liono510]

If you rewatch your video , The clutch started with the pins in the right hole, then you built it and put the clutch weights using the left hole ?
1:24 and 5:22

[@jillesgroskamp8752]

Yes true very sharp! The clutch was build wrong but rebuild in the right way.

[@annon1731]

Hi Jilles, when you install the clutch weights, is it important they are free when sliding over the flywheel pins?

[@jillesgroskamp8752]

Hi Dane, yes they should work free but minimum play

[@ricardoprieto7124]

Hello..... can I use any brand of clutch, on any brand of chassis or engine? respecting tolerance and measurements everywhere, sure, I'm newbie on this 1/ 10 on road cars, and I'm not sure..... The people I asked for, don't tell me anything clear.... Thank you in advance

[@jillesgroskamp8752]

Hi, yes usually every clutch fits on any engine/car. Only thing you have to check if the clutch bell has the same thread as your pinion gears.

[@ricardoprieto7124]

@@jillesgroskamp8752 thanks so much for response.... 😊😊👍

[@liono510]

I use infinity and serpent clutch on XRAY , But like Jilles said certain gears only work on some clutch Bells. Serp/xray gears work with eachother …… infinity won’t accept or thread on anything else