Excellent work ( I repair guitars for a living too 🙂 ) and the way you routed those cavities in the back of the neck and plugged them was flawless... It's so beautiful that if it was my Wilshire I would have left the "fillings" visible and simply refinished the area 😁😁 Again, great job...
I can't help but think that the insertion of gussets into the back of the neck is a bit overkill. The glue job alone is perfectly adequate, and when cleaned up will more than suffice. Just saying.
I don't know if you read english. I never saw a neck repair so ugly. If the right glue were used, the job could be finished there. Clean, strong and correct
I'm thinking it must an inexpensive guitar, since the cleave is at an angle ie cut of wood is poor, and its a cheap white hardwood, I'm guessing ramin or obeche and stained...awful colour by the way.
Bro....next time simply fill it with Epoxy!!!! Its so obvious that your fittings has gabs at the bottom. Epox is more durable, can be easy worked out and if needed reinforced with carbon or Glasfiber!!!
とても綺麗な仕上がりですね〜、素晴らしいです!勉強させていただきました!
Excellent work ( I repair guitars for a living too 🙂 ) and the way you routed those cavities in the back of the neck and plugged them was flawless...
It's so beautiful that if it was my Wilshire I would have left the "fillings" visible and simply refinished the area 😁😁
Again, great job...
リペア技術と言い
BGMと言い
素晴らしい動画ですね!
このサムネイルのせいで夢の中で自分のギターのネック折っちゃったよ
何かのせいにするな。原因お前だろ?考えろ
正夢にするんでねぇぞ・・・
気の長い作業、素晴らしい❗
ウィルシャーはほんとうに華奢ですよね
ここまでいって直るもんなんだ。あと再塗装しなくてもそれらしくかっこよく見えるかも?
Great repair , will there be part 2 of this repair ?
I can't help but think that the insertion of gussets into the back of the neck is a bit overkill.
The glue job alone is perfectly adequate, and when cleaned up will more than suffice.
Just saying.
Absolutely, all the splines do in this case is produce a weakened area at their ends
He wants to go all out, but Epoxy cavity fill would be better
お疲れ様です。
きれいになおりましたね!ヤスリがけお疲れ様です。
ヤスリがけ頑張ると手が腫れてグーが握れなくなりますよね。
ゴリラボンドは乾くと透明になるんですね。削り心地はタイトボンドと同じ感じなんですかね?
実際使ってみてゴリラボンドはタイトボンドとほぼ同じです。硬化後もタイトボンドのように固くなるので削りやすいと思います。
@@kaizoguitarchannel
なるほどです。参考になりました(*´ω`*)
I don't know if you read english.
I never saw a neck repair so ugly.
If the right glue were used, the job could be finished there. Clean, strong and correct
マイケルシェンカーはドラムスティック埋めてたで
great skill, great job,,
この動画を見ればライブでギター破壊し放題ジミヘンし放題ですね!!
燃やすの?w
Parabéns pelo excelente trabalho
お見事!スバラシ!続きも楽しみ。\(^o^)/
What do you do with the glue in the trussrod ?
He is doing Bullshit!!!
Super mistr guitar man 👍👍👍
3:48 から始まる木屑が散ってるのが、金粉エフェクトみたいでかっこいい!
お疲れ様です!それぞれトリマーのビットはどういうものを使ってますか?
ビットは直径12mmで刃の高さが10mmくらいのストレートビットを使いました。ネックの溝を掘るときにテンプレートに合わせる為にベアリングを3枚追加しました。
ゴリラボンド、タイトボンドに比べたら接着力弱すぎません?
mahogany or maple?
Перед склейкой отломленных частей, необходимо терпеливо удалить отщепившуюся древесину, чтобы добиться наилучшего прилегания.
Belo trabalho, grande profissional parabéns !
baru 6 string sudah patah gimana jika besuk launch tremolo gitar 12 string...
I wouldn't use gorilla glue for a guitar neck, it foams up. I wouldn't be surprised if your truss rod got glued in place.
掘った溝に合わせて材を削るって、逆じゃないでしょうか?
Если аккуратно приклеить эпоксидным клеем, то и вставки не понадобятся
Бред
класс!!!супер!!!!
I'm thinking it must an inexpensive guitar, since the cleave is at an angle ie cut of wood is poor, and its a cheap white hardwood, I'm guessing ramin or obeche and stained...awful colour by the way.
did someone have pissed off woman ?
ギター 叩き折って
ドラム 蹴って
焚き火にしたバンド いたような
キャロルだったか?
差し込む木材の強度によっては、ボンド付けしたままの方が丈夫そう。
Древесина гавно. А на новых Е(б)пифанах, вообще никуда не годится.
バカヤロー、サムネが悲しくて見てしまった
仕事が雑過ぎる。
それな
Bro....next time simply fill it with Epoxy!!!! Its so obvious that your fittings has gabs at the bottom. Epox is more durable, can be easy worked out and if needed reinforced with carbon or Glasfiber!!!