How To Lower Adjustable Bed Stuck In Up Position - Serta iComfort Revolution ErgoMotion
Вставка
- Опубліковано 1 жов 2024
- Check out my DIY guide for changing the motor on the ErgoMotion adjustable bed base -
www.paulstrave...
If your Serta iComfort bed with a Motion Perfect (ErgoMotion) adjustable base is stuck in the upright position and you just want to go to sleep, follow these steps.
1. Unplug the base.
2. Pull out the cotter pin from the end of the linear lift actuator arm.
3. Have someone else help you and hold the base of the bed up!
4. Use a pair of pliers to pull out the metal pin.
5. Pull the end of the lift actuator arm out of the bracket.
6. Allow the bed to gently slide back down to the "flat" position.
The head motor isn't working on one of our bases, the part number is as follows:
Linear Actuator
Model: SFD-DQ-1/2
24V 40W 2.5A
Jiaxing Shufude Electric Co. Ltd.
Check out my DIY guide for changing the motor on an ErgoMotion adjustable bed base -
www.paulstravelpictures.com/Serta-iComfort-Adjustable-Bed-Motor-Replacement-Guide/
Mine stuck in upward position at the foot part. Just got delivered yesterday. Ive tried everything could find online. Sending it back.
If your Serta iComfort bed with a Motion Perfect (ErgoMotion) adjustable base is stuck in the upright position and you just want to go to sleep, follow these steps.
1. Unplug the adjustable base.
2. Pull out the cotter pin from the end of the linear lift actuator arm.
3. Have someone else help you and hold the base up! Or else it might fall and hurt you.
4. Use a pair of pliers to pull out the metal pin.
5. Pull the end of the lift actuator arm out of the bracket.
6. Allow the base to gently slide back down to the "flat" position.
Good night :)
One of my wife's crazy cats was playing with the remote when we were out of the house, then hidden it. Had to sleep one night with the bed in the up position (that sucked for me), this this video was perfect. Thank you so much. Now I can sleep in the normal position 😁😁
Life savor
Hi Brianna, I'm glad the video helped you.
If you end up replacing the motor, I have a DIY tutorial for the procedure on my site -
www.paulstravelpictures.com/Serta-iComfort-Adjustable-Bed-Motor-Replacement-Guide/
I hope you find it to be useful. 🙂
I have the same exact model and issue. My motor froze up. Did you have to get a replacement?
Hi, yes, I did have to contact the company and get a warranty replacement motor. I only had to pay a small shipping fee.
Here is my DIY guide for changing the motor -
www.paulstravelpictures.com/Serta-iComfort-Adjustable-Bed-Motor-Replacement-Guide/
I hope that helps. :)
I had to replace the motor for my dads bed for this exact reason, but it got stuck again as I put it in the up position to test it. Any advice what I should do?
Hi, I'm sorry to hear that about your dad's bed. :( I had to call the "ErgoMotion" company and submit a warranty request. They shipped me a new motor and it has been working perfectly for the last few years. If you used the correct kind of replacement motor, I'm not sure why it would become stuck again.