I’m really following your 135 restoration and hope you can advise where the cable to the headlights should run as my tractor had nothing when I got it. I see a hole with grommet at the bottom of the bonnet side panel that could be the route and short leads joining this to each headlamp, it would mean the cable run is alongside the offside of the engine but I notice “apprentice” has it laying over the top of the rocker cover? Cheers Paul
Thanks for watching 👍👍 cable is only led there atm , will deal with it when we get to assembly the bonnet stuff , so hopefully will see what goes where ! 👍
Great job guys, 135 really coming together.❤👏👏👏👌 Hmmmm......... is that the cab plate l see at the front? I hope l'm wrong or else you know what you've done 😜 no biggy
Good to hear Lanky is on the way to normality, well as close to normal is is possible 😂😂😂😂😂😂😂😂😂. Cheating fitting roof frame with crane. When men were men we lifted it up, climbed up onto the seat, and fitted it on our own. See parts book or service manual for wiring harness routing. Andrew is right, top link bracket needs turning. Maybe Penny Black could be able to tell us if the draft control wasn't working properly on the razor. Bracket maybe the wrong way round 😂😂😂😂😂😂
Great video Dave. Glad to hear that Lanky is doing good. Enjoyed watching. 👍🏼
Thanks 👍👍
Great news Lanky is.on the mend. 135 is certainly taking shape looking good.
Cheers, Poth.
👍👍 cheers
Great work guys
Thank you 👍
135 coming together well. Glad to hear that lanky is making a good recovery.
👍 thanks
Great stuff that grille is looking good, wish lanky all the best.
👍 thanks 👍
135 taking shape. Glad to hear all is well.👍👍
Cheers 👍👍
Great work that 135 going to be better than new, hope Lanky is well
Cheers , thank you
The legal limit is 1mm for a commercial vehicle tyre Dave 😬😁
1.6 for cars 👍
Progress!
👍👍
I’m really following your 135 restoration and hope you can advise where the cable to the headlights should run as my tractor had nothing when I got it. I see a hole with grommet at the bottom of the bonnet side panel that could be the route and short leads joining this to each headlamp, it would mean the cable run is alongside the offside of the engine but I notice “apprentice” has it laying over the top of the rocker cover? Cheers Paul
Thanks for watching 👍👍 cable is only led there atm , will deal with it when we get to assembly the bonnet stuff , so hopefully will see what goes where ! 👍
Super stuff as always
Cheers 👍
Don't forget to turn the toplink bracket round the other way. It is back to front at the moment.
I’ll inform penny ! 😂👍👍
Just remove the 2 cap screws, fold the bracket down, rotate the whole assembly 180 deg, fold the bracket back up and refit the cap screws.👍
@@andrewplumb6189 👍👍
It’s ok iv not finished at the back yet , the 2 screws are just sat in there so I could work out if I was missing any bits 🤦♀️😂😂
@@MasseyDave I already no thankyou 😂😂
Great job guys, 135 really coming together.❤👏👏👏👌
Hmmmm......... is that the cab plate l see at the front? I hope l'm wrong or else you know what you've done 😜 no biggy
That’s the way it was when we took apart , I checked pics we took b4 taking apart and it was at the front
👍👍👍👍
@@MasseyDave 👍👍👍 Great Dave👌 🇮🇪🇮🇪🇮🇪
First again, get well soon to lanky
👍 thanks
You will be back overseas again soon.
@@grahamclark7594 @78mikehayes may well be ! But where will he be goin ?? 👍👍
@@grahamclark7594 Graham “silver lining” Clark
@78mikehayes the competition's back. 👍🤣
Good to hear Lanky is on the way to normality, well as close to normal is is possible 😂😂😂😂😂😂😂😂😂. Cheating fitting roof frame with crane. When men were men we lifted it up, climbed up onto the seat, and fitted it on our own. See parts book or service manual for wiring harness routing. Andrew is right, top link bracket needs turning. Maybe Penny Black could be able to tell us if the draft control wasn't working properly on the razor. Bracket maybe the wrong way round 😂😂😂😂😂😂
👍😂🤦♂️😂😂
Hi da have you had a fight with a razor
I did , twice 🤦♂️😂