Smoke Screen Machine Protect 950 XP - Teardown of a Smoke Cannon!

I found a old and discarded smoke cannon at a scrap yard! It looked in rough shape, but still had some oil in its container. With a bit experimentation and at last forcefully feeding it oil, it gave off its smoke!
As a bonus, I got most of my workshop lubricated from half-burned oil smoke raining down droplets everywhere!
Discussion of the teardown: highvoltageforum.net/index.ph...
Support the channel, join as a member here: / @kaizerpowerelectronicsdk
↝↝ Additional information and links ↜↜
★ Partners: ‪@arcattackmusic‬ and ‪@franzolielectronics‬
★ Music by Mikas: / mikasdk (used with commercial permission)
★ T-Shirts, mugs and other merchandise: teespring.com/stores/kaizer-p...
★ Electronics website: kaizerpowerelectronics.dk
★ Facebook: / kpedk
★ High Voltage Forum: highvoltageforum.net
★ My Slow motion videos channel: / @slowmotionvideosdk
★ Find me at Odysee: odysee.com/@KaizerPowerElectr... and odysee.com/@SlowMotionVideos:5
★ Find me at LBRY: lbry.tv/@KaizerPowerElectroni...
$ For commercial/non-commercial licensing of material, contact through here: kaizerpowerelectronics.dk/abou...
♥ Donations. Please consider one of the following:
♥ Donate via Paypal: [e-mail]
♥ Donate crypto currency directly on these addresses (Check if there is minimums before transfer):
• BTC (0.0001 minimum): 3FtSz4svHxLYw4BNHWetSm65yajUZNb8CY
• ETH (0.05 minimum): 0x911d11766d3ab8efc829eb5f218f3b83dba12efa
• LTC (0.01 minimum): LLbTw63Mks4CmeWmkt2jChJfvrWHheH8T7
• DOGE (no minimum): DMRRa8uRH19tYWZ9GVHijpZYgRTecNVLFo
• SHIB (400 minimum): 0x8c1ed98c6c842467d782d2f865ed6d7adb8dfb4b
#electronicscreators #antitheft #smoke

[@LawpickingLocksmith]

I have similar pumps left from a time when I was repairing coffee pod machines. Better oil than acid in the workshop. Personally I would load such a burglar incapacitation device with chilly oil just to make sure the burglar is still rubbing eyes when the police arrives.

[@KaizerPowerElectronicsDk]

Much of the time, all these precautions, activate on false alarms or mistakes. You don't want it to be too nasty :)

[@T2D.SteveArcs]

Lol, never seen a anti burglary device smoke machine 😂, you should make a big model electrolytic cap cover for it to vent from for your Tesla coil shows in the future 👍

[@Alexelectricalengineering]

Interesting stuff 👍👍

[@KaizerPowerElectronicsDk]

I would have kept it for just being a fast and high output smoke cannon, but the amount of oil spraying... it went back to the scrap yard :)

[@Alexelectricalengineering]

@@KaizerPowerElectronicsDk Maybe it's not operating properly or it's the wrong smok liquid.

[@inothome]

Is that oil based or glycol based? I have worked on a few "fog machines" and they are glycol based. Also do a lot of DJ equipment repairs and the DJ decks are always covered with years of sticky, stinky, fog machine goo. I feel for ya and having that directly sprayed on your stuff. I actually just brought in a CDJ-900 for repair and smells, probably like your shop smells...
But machine that really pumps it out!!

[@KaizerPowerElectronicsDk]

I am guessing it is oil, as its sold as such from the manufacturer and my workshop is more slippery than sticky :)

[@inothome]

@@KaizerPowerElectronicsDk Got ya. When fresh, the glycol is slippery too but as it dries it gets nasty and sticky.

[@gth042]

Too bad it went back to the scrap yard. A little pesticide in that thing is all you'd need for a nice mosquito fogger. Or, just use it with a Tesla coil (glow around the arcs?). Good luck degreasing everything. It is never a bad time to give stuff a wipe though.