Vertical Shiplap Tutorial & Living Room Makeover
Вставка
- Опубліковано 8 чер 2024
- Check out our small Living Room makeover done in a weekend using vertical shiplap and a splash of color. Check out the Teslong endoscope at geni.us/1gmYC.
#livingroommakeover #remodel #diy
► SPONSOR ◀︎
A huge thank you to TESLONG for sponsoring this video. You can check out their impressive NTS500B Endoscope at geni.us/1gmYC.
📲 MORE DIY GOODNESS 📲
Check out the accompanying article at
lrn2diy.com/living-room-makeo...
📦 PRODUCTS IN THIS VIDEO 📦
• DAP Drydex Nail Filler (PAID AMAZON LINK): geni.us/ezNPsg
• 5mm Plywood (PAID LINK - $16 USD): homedepot.sjv.io/eOYbj
• Rigid Foam Insulation (PAID LINK - $18 USD): homedepot.sjv.io/VL703
• KREG Circular Saw Track (PAID AMAZON LINK): geni.us/Tu0S
• Ridgid Cordless Circular Saw (PAID LINK - $169 USD, Lifetime Guarantee): homedepot.sjv.io/5Vb73
• Ridgid Brushless Drill Combo ($199 USD, Lifetime Guarantee): homedepot.sjv.io/ojYB9
• Ridgid Cordless Brad Nailer (PAID LINK - $199 USD, Lifetime Guarantee): homedepot.sjv.io/Wx70M
• Ridgid Cordless Jigsaw (PAID LINK - $129 USD): homedepot.sjv.io/qeYoy
• Dewalt 12 Inch Double Bevel Sliding Compound Miter Saw with Shadow Guide (PAID LINK - $599 USD): geni.us/nelR
• Franklin Stud Finder / Sensor (PAID LINK - $55 USD): geni.us/OhktAy
• Liquid Nails (PAID LINK - $1.77 USD): geni.us/Aa6t0k
• Swanson Speed Square (PAID LINK - $10 USD): geni.us/jZB0w
• Ikea MÅLERÅS Picture Ledge ($13 USD): www.ikea.com/us/en/p/maleras-...
• Ikea Vedbo Grey/Birch Armchair ($199 USD): www.ikea.com/us/en/p/vedbo-ar...
Most links are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel, so thank you for using them!
🎬 CHECK OUT THESE VIDEOS! 🎬
• How to Caulk Like a Pro: • How to Caulk Like a Pro
• How to Paint Edges Without Tape - Cutting In Tutorial: • How to Paint Edges Wit...
• DIY Faux Shiplap for $80: • DIY Faux Shiplap for $80
📲 MY 3D PRINTING CHANNEL 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 Intro
00:24 Hole Patching, Blue Stripe
00:51 Shiplap Options
01:12 Cutting & Prepping Shiplap
02:52 Sanding and Side Painting Shiplap
03:35 Installing Shiplap
05:36 Cutting Around Outlets
08:13 Paint Prep & Paint
09:13 Cutting Trim
11:18 Wrapping Up
11:40 TESLONG Sponsor
12:42 Final Reveal - Навчання та стиль
A huge thank you to TESLONG for sponsoring this video. You can check out their impressive NTS500B Endoscope at geni.us/1gmYC.
So nice you have an assistant:)
She's pretty great!
Hell yeah
This is absolutely amazing- I am so impressed with the quality of workmanship. The difference from start to finish is phenomenal.
I love these DIY Videos! 😁 Simple and very great quality!
Butta! Love the video, we’re gonna do this next. Well done and thank you!
Very comprehensive. Great videos!
Awesome job!!
This came about amazing guy
Very nice
Given you added spacers between the boards, that would mean you could probably see some wall peeking through? So if painting the boards a certain color, would you paint the walls that same color prior to board installation?
Great question. It really depends on colors. In our case, the walls were a very light gray/beige and we added white shiplap, so you really can't tell. If you have more contrasting walls to the color of your shiplap, then yes, I'd paint them first. We did shiplap in our basement bathroom (there's a video of that on our channel too) and did it directly on the green, mildew-resistant drywall so we spray painted the lines where the gaps would be.
Love the work, 1)do we need to prime before the paint? 2) Do you recommend for bathroom since more prone to moisture ?
Hi Venky, great questions. 1) Some sort of primer is recommended. We used a paint and primer in one. It's more expensive but we've used it for years and it covers really well. 2) For bathrooms, this will still be ok but you want to make sure you're thorough with the paint and with adhering it to the walls. We did shiplap in our basement bathroom a couple of years ago and it's holding up great.
@@LRN2DIY thank you
I saw "Made in Indonesia" there. 😎😎
DIY here: why the spaces between boards and did you use adhesive on boards not nailed to studs? And thanks, very informative. Revised: I just heard you say liquid nails was used.
The spaces between boards are to create a uniform gap. Part of it is the aesthetic but it's also because not every board will be perfectly smooth, straight and flat on both edges so having a slight gap essentially covers this up, allowing for a nice uniform line on either side. And yes, we glued down every board since so many didn't fall on a stud.
You mentioned you cut the strips to 5 3/4 width. For horizontal shiplap, what length do you recommend?
Hey Scott, any length that you need for your room. It's always easiest to leave the full 8 foot boards if possible and when you can join two board ends over a stud, that's ideal too.
I just realized you were asking about how wide/tall to cut the horizontal boards probably. We went with 7 3/4 for that and like the look of it. Gives you six boards per sheet and looks nice.
Um...Using a jigsaw with your thighs as a sawhorse (7:18 )? Your shop teacher would not approve.
I'm definitely living on the edge ;) Yeah, not my safest moment and you're right, Mr. Bordanero would be shaking his head.
um... shiplap typically runs horizontally, because they resemble planks of a wooden ship/boat, which run ...horizontally. This more resembles a "cheap" form of custom wainscoting, of which you can buy paintable wainscoting paneling for $3/sq ft or for wooden stainable wainscoting $5/sq ft
I'm not questioning the quality or skill of your build, just on the nomenclature and sensibility of it. You could have made it simpler, and easier and thereby cheaper. I know hindsight is perfect 20/20 vision, but...
Wow, design wise it looked alot better before. This looks cheap and unpractical