Unlock the speed limit on the HERO S8/S9
Вставка
- Опубліковано 6 жов 2024
- To unlock the speed limit from the HERO S8 or S9:
1. Before you turn on the scooter, push the throttle (accelerator) until the end (pushing it downwards)
2. Then, without releasing the throttle, turn on the scooter and keep on holding the throttle for 15 seconds
3. After that, the speed limit should be unlocked
WARNING! In some jurisdictions, it might be illegal to roll in public areas without the limit speed and might also constitute a crime. Review your local laws before proceeding to unlock your speed limit.
All activities you perform shall be done under your own risk and responsibility and we shall not be taken accountable for any damages or activities performed based on the content of our videos. We just share tips.
Ride safe!
A good advice ,to put the speed limit back, do the same but hold it for 10 seconds, the speed will go back to 25,
I have tried doing in mine....it´s a LIVIAE lcd panel, it changed the number of magnets, on P07 so the speed marker make it looks faster, but actually the real speed is the same...it was in my case!
So good 👍!!!!! Thank you♡♡
Thank u 🙏 🙌
Thanks for this!! I just got my S8 and could not figure out how to get it past 13 mph, lol. 😆 Was going bonkers.
I'm glad that was useful to you, little advice be gentle with the stem clamp if you tight to much it will break
Thankyou 🙏 my TF-100 has no p08 setting it just goes straight to p09 is there a way to unlock it? Thankyou in advance
Where you able to find any info by chance!? I have the same controller
As an alternative solution, if you can't find the option on the display, you can unlock the speed of an electric scooter by checking two wires connected together, which are usually white or grey. Look for the looped wire on the controller that limits the speed. These wires are typically white or grey and are connected to each other
WHAT IS GEAR ?
If you want to lock it again can you follow the same process? I'm thinking you might unlock it when you go offroad, then you want to lock it again when you are back on the roads again?
Yes, it's the same
@@e-scoottech4051 Hi. Can we change the lock speed? For example, mine is locked at 20 km/h, but I wanted to go up to 25 km/h. Thx
Probably your's it's limited by the P08 I'll recommended to check it and if you want to go to 25 just setting up to 25 if not that's mean that your controller it's fiscally limited and you must unplug the wire loop, on the Hero's controllers normally it's a withe wire connected between each other
DO THE SAME THING BUT WAIT 10 SCONDS
i just bought the heros8 today
Does this work on any ms energy scooter?
Hi at the start I get no numbers going backward just stays at 00 what am I doing wrong please.
Maybe you got a faulty controller
Thanks for your reply worked out that I had to change from kick start and put the rear tyre up. Did it this afternoon and all works perfect.
Bonjour. J'ai une héro s8 v2 21ah. Et je n'arrive pas du tous a la débrider. Pourtant je suis bien les informations. Merci de m'aider. :) :) :)
Possiblement elle est bridé a niveau du contrôleur, il faut débrancher 2 câbles blancs branchés entre eux directement
is. not woring i tru same like you but isn’t working why ? help
If I replace the controller on the Apollo Ghost with this, will this hack work?
I dont think
Hello, can I do it on my nanrobotd6??
Hi! do you have to unlock the speed limit anytime you power on the scooter?
No, once you unlock it, it stays like that
@@e-scoottech4051 Thanks for the answer!!
@@e-scoottech4051 hi and can you revert back to speed limit after you unlock it ?
Yes, it's the exact same process
Does this work zero 9??
It’s fake?
Please what is the code in Zero 8 ??
Thanks for the help🙏
5252
I dont get the error if i out the
will not affect the motor when the speed is changed ?
Not at all, the motor can take the speed without problems
As long as it is a scooter with this kind of monitor, can it release the speed limit?
Not always
What does error 08 mean? My scooter is displaying that and won’t move.
Turnstile fault
@@e-scoottech4051 meaning what exactly? What should I do?
Check the throttle magnet and Hal sensor, sometimes the magnet gets loose
@@e-scoottech4051 where can I find the hol sensor?
That's works on hero 10
am I supposed to keep pressing the power button?
Yes
does this work on joyor g7
First you need to.cut the White kabel ?
Normally yes, the first models received in Europe did not come with the white cable connected, and only with the limited speed on the dash, but now the recent models you neet to find the withe wire on the controller and un plug it
J'ai un problème de défaut d afficheur que dois-je faire merci de vos réponses
quel est le problème sur votre trottinette exactement ?
works in zero 10x?
No, zero has some loop wires to cut or unplug from the controller
Plz advice
What do you need?
Can i do this on my joyor f7 electric scooter?
No idea
@@e-scoottech4051 im assuming that maybe its possible due to a similar throttle
@@e-scoottech4051 so can u see if i am able to get my joyor f7 up to that speed or around there, i really want to know if im able to do it
Normally you can find how to unlock it on your user guide if not I'll recommend to contact your supplier, unfortunately I don't know the model and I can't help you with that but good luck
how many seconds it requires to hold it for
10 to 15 seconds
@@e-scoottech4051 can't wait until it get to my house it said it should be a few more days until it arrives
@@e-scoottech4051 any tips. I don't wanna break anything
Works this on the zero 9 step?
I don't think so, on the zero I believe you most cut the loop and it's a white wire
Thats a lie i have hero s8 in mode 3 it goes 52kmh empty with me on it goes 45max
Maybe you need to lose some weight
@@e-scoottech4051 lol
hero s8 46V no good please ( fr que dois- je faire ?) merci
Il faut débrancher le câble blanc du contrôleur
@@e-scoottech4051 merci alors le fils rouge sur le bleu et le bleu sur le rouge et bien sur le blanc c'est pour faire jolie !!!!!! mille merci
@@cricri7769 salut, peut tu me dire comment tu as fait stp ? le controlleur se trouve ou ?
@@e-scoottech4051 Hello, i have the same probleme, where is the controller ? i'm french too
ou est le controlleur svp
@@sqliiif il paraît qu'il se trouve devant la batterie devant le cache c'est ce que ma dit un pro de trotinette
Mate I have Hitway electric scooter 800w type.. I can get 43 45 kph but have you any hints plz so I can make it faster
Have you found anything yet ? I was thinking it must have a limiter wire inside
boss pano mag set up tulad ng ginawa mo kc ung scooter q mabagal boss tulong nmn boss
Next time speak so we can understand what you are doing
Its clear fym
Just do what he did