Changing the fuel pump on a Hyundai Accent. It cranks but won’t start.
Вставка
- Опубліковано 25 сер 2024
- Cheap homesteading is changing the fuel pump on a Hyundai Accent. This is one of the easiest cars to change the fuel pump in you don’t have to remove the fuel tank. You can remove the fuel pump through the backseat of the car. It is the same repair for all the years.2006,2007,2008,2009,2010,2011,2012,2013 2014.
Old video I know but my gosh it is just what I need right now. Ordering a fuel pump assby now and will do it myself instead of calling for a tow.
Thanks for posting this excellent tutorial!
Nice job Pete. I'm glad to see it had a panel to get to the pump under the seat. On my daughters car I had to drop the tank.
Good 🎥 Pete. I recently replaced my fuel pump on mines very simple.Done in 20 minutes.
That's awesome! Thank you for sharing your God given talents
Thanks for the video! Very helpful
Excellent video. I did all step you told here. Appreciate for it!
Thank for the video , great help to me...Best regards from The southern tip of Africa
Here because its happening on my Accent 😂 Confirms my suspicions. In ontario here have 350k on original pump
Great job
it was an '03 a bit different but very helpful thanks man
Great Video thank you , and showing the part .
Awesome video! How did you know that the pump was bad. I have the same car and it shut off while I was driving and won’t start now. Lately when I fill up it car has a hard time starting I’m wondering if this is the issue.
Same bad dirty fuel .
hard start randomly cutting off. We're is the fuel filter located?
also I love how the box says de la bomba de gas....
Thank you for you help and time that was very helpful man 🙏❤️
Great job buddy big like
good advice/demonstration. I too wanted a Spectra Premium pump but its made in Canada and no longer in inventory down here in the lower 48. Did you ave a problem though with the circular rubber gasket that came with it? I got stuck with a pump from Mexico and the sealing gasket was triple ribbed and impossible to line up with the new pump and existing hole. I used the old one instead. Good video.
Thank you!
Great job Pete. Just saved a lot of money by doing that yourself. How did you know it was the fuel pump. Lucky guess I assume. It's always nice to check the most obvious cause first in that case. Take Care Pete
Did you replace your fuel pump and what issues were you having? My car won't rev past 3000 rpm and recently it required press gas pedal to turn it on. I think it's the fuel pump.
I ended up changing the pump and it still did it. It ended up being the purge valve I change the purge valve and it was all good
Here’s a link to the video when I change the purge valve ua-cam.com/video/P42sByyErXw/v-deo.html
good job, thanks.
Nice job..very well explained..even I can do it 😂
Thanks!
Where is the fuel filter located on this model? Is it part of the pump assembly? Please help!
Did you ever figure out where the filter is on these cars
Just got to the spectra part ! Your in ottawa too no way haha I just got the a pump from the same caps 😂 so many coincedences lol but my car isnt red
caps next to the fuel pump.......nice!
I'm changing the gasoline filter but the problem was the timing belt was broken
Thanks
Thanks.
Hey man you’re amazing and thanks. I’m subscribing
Grab your well gained like good man!
Thankyou!
My fuel hand goes straight to full & when the ignition is turned off the hand drops to empty
👏👏👏👏👏👏
I have a 2010 accent GS 2 door. My car won't start after I fuel up. Whether it's from a 1/4 ,1/2 3/4 of a tank. Putting any fuel in the tank causes this to happen. I have to floor it and put it in drive and take off . Then about 15 seconds after driving my car stays on and I can stop and restart the engine with no problem. Any idea of what you think this could be?
There can be two things the fuel pump or the suction control valve. You probably should start off with the suction control valve it’s the cheapest. And that is What happens when you stop to get fuel And then it won’t start. Hope you get a fixed
PS: would recommend first removing the fuel pump fuse from the panel box under the hood.
Can you please explain how can I clean the gas tank in Hundai Accent 2007
Hi man , love your video so much . I have same car as your daughter. I change the new fuel pump, very easy follow your video. But now it’s always stop again after I drive 10 mins . Do you know how to test the fuel pressure ? I don’t know what is wrong now. Thanks
Has anyone used the reset code & got the float working ?
were did u order that from
Did your daughter notice any performance issues prior to the car not starting?
I take it y'all love exposition....
How do I know my fuel connector is worn, and can I bypass it
Hi there, I swapped the fuel pump, it started fine for a week and then it’s having the same problem again. What do you think it is
The other thing that can cause that is the Purge Control valve. It is a small valve that is on the line to your canister.Hope you get to work
Although I didn’t change the whole assembly like you, I just did the motor by itself. Do you think that’s the problem? I’m not too sure if the direct pressure and hoes got clogged somewhere
I changed the purge control valve, still the same, but it’s only does it once, and then after that it starts
We all know where the house key is hidden. 🤪
You make it look so simple! Do you want to come do mine? 😄
It is a pretty simple job except a little messy. you have to make sure that you have a container ready to put the fuel pump in to take it out of your car. Or it will smell like fuel for a long time. Thanks for watching.
I was surprised there was no replacing of the fuel filter as most of my suppliers will not warranty a new pump unless a new filter is replaced at the same time
Herbert Norkus The filter in this model is included in the sending unit. The external one is only for the early 2005 and before, which should be located above the sending unit off to the side.
So, I'm driving Hyundai Accent 2010 also, we were replacing the fuel pump, when we finished i switch the car on and Voila , the pump got no power at all! The relay is good but it won't turned on!
I was having a fuel smell after fill-up and an evap leak. Pretty sure it was the pump leaking. Took it to the shop to get the work done, part was about 80 to 180 dollars.... just got a quote for 800... insane... it's a 1 hour job... I must look like a suckered or something... insane.. if he said 500 I'd be cool but 800... no problem I'll just do it myself...
What's the psi of the new one
I remember you replaced the Purge Valve in another video, I have an accent 2009, and I'm thinking about replace the Valve, did that work for you?
It ended up being the purge valve. I First change the pump it seems like a lot of people had that same issue with the pump. In Hindsight I would’ve change the purge valve first. Have a good one man
@@cheaphomesteading I will replace it, I've see un a bunch of forums on the internet and everybody say it is the valve, as you say this seems to be a common issue with those accent, thanks a lot sir, cheers.
Is that a 2002 accent?
Thanks