SEE THE FULL PAINTLESS REPAIR PROCESS IN JUST 14 MINUTES | Paintless Dent Removal
Вставка
- Опубліковано 12 чер 2024
- How To Repair a Car Dent In Beverley, East Yorkshire With Paintless Dent Removal...
Thank you for watching my latest repair video, Im Martin Sadler from Dent-Remover and i show YOU how i repair this medium sized dent, showing you all the main steps in just 14 minutes!
Ok so the actual repair took around 1 hour to complete, and the finished results are amazing!
The dent was on a Hyundai IX20 rear 1/4 panel, not an extreme dent like what i usually show you but really annoying for our customer and the kind of damage i repair weekly, these dents repair really nice and the results speak for themselves...
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 PDR video
00.29 Introduction
00.44 How I estimate a dent repair
02:06 How to gain access to a dent
02:20 Using HOT Glue to fix a dent
03:21 Repair the damage with dent bars
07:53 Fixing small ripples with HOT glue
09:53 Repairing ripples with a blending hammer
11:02 Finishing the dented bodyline
11:31 Watch a dent disappear
13:12 Conclusion to the dent repair
13:34 Before and after videos of the repair
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All tools used can be purchased from
kecotabs.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
#DentRemoverBeverley #PaintlessDentRemoval #EastSide #pdr #ThoseDentGuys #growwithvideo #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK - Авто та транспорт
man what an expert , i know nothing about cars but watching this videos you can tell the guy is a master at work
'It looks so easy because it's skilfully done' .
Your videos are definately getting better.
Well done.
Thanks Fred Bloggs
@@dentremover01
Happy Birthday Mr Dent remover.
Thanks Fred
Very nice, Martin! I realy enjoy at yuor work! Many hapy wishes by Dragan from Serbia!!!
Thank you Dragan, happy new year to you
Nicely done Martin 👍👍👍
Thanks Jake!!
Nicely done. It looked cold in the shop
Hi Mate- it’s always blumming cold here!
Sweet repair Mate!
Thank you Dent Kraft 🙌🏼 hope you and business are doing well
Great repair and video as always 👌
Thanks for the inspiration. I needed it after putting a dent in my cars front wing right on the swage line 2 inches long. I used glue and pulling bridge plus rods and heat over 2 sessions i removed the dent and restored the collapsed swage line. Thanks again it was the first time I've tackled anything with dent rods or so difficult before.
Gran reparación! Gracias por mostrarnos!! Saludos desde México!!!!!👍🏼
Отличный результат, молодец 👍✨✨✨
Well done Martin
Thanks Paul
Nice one!
Thanks Tom
Love your videos Martin 👍🏼
Thank you Mineral very kind of you
Ótimo trabalho bem detalista
Nice to watch when the job is correctly done 👍
Thank you Edmar 🙌🏼 hope your well matey
Good job
Thank you Beny 🙌🏼
Nice job man !
Thanks Jonathan appreciate 🙌🏼
Lovely working inside. I've Been freezing me balls off this winter 🤣 great repair. I need to get a unit
Oh I was out yesterday with 2 jackets on I was freezing! A unit is great but it’s all extra costs
Nice repair Martin. I can't remember when I last experienced the cold like that don't think l could handle it. 🇬🇧😎
Hi Bill!! Oh it’s horrible isn’t it! Mind you I haven’t ever been too hot I wish I was somewhere colder!!!
Hope you enjoyed the show last night too (TDG)
@@dentremover01 yep it was well worth the 4am effort on my part great show guys.
Better than new.
Thank you Massimo
Such a shame you're not based in Surrey. I would have really needed your services.
Hi A, thanks for your message, there’s some good techs in your area, and Jake Quintin (1st track dents) is near at Albans?
Waiting for a new videos. Realy good job!!!
Thank you 🙌🏼
Here is my Huge Thumb up 👍 again, Martin. Fantastic work and video as usual 👌🔝
PS: I missed the last live ep of TDG. I have to watch it recorded on FB
Thanks Francisco! Oh the last one was epic! We stream live to YT now too!! The latest was a new tool release by Woodpecker UK it’s a Monocle - great tool btw- opens your eyes Fo Sho!!
Buen dia Martin, podria indicarme cuanto tiempo se tarda en realizar estas reparaciones?
Gracias
Saludos cordiales desdes Guatemala.
Ruben Ibañez
Hi Ruben, I hope Spanish translation is correct
Hola Rubén. gracias por su comentario. Una reparación como esta tardaría entre 2 y 3 horas en completarse... son reparaciones bastante comunes y salen genial. feliz año nuevo martín
Just started self teaching paintless dent repair wish I could find some tools no longer used for a good price
Well done! Are you in the UK?
@@dentremover01 usa
Hi martin
Hello Bülent 🙌🏼
Nice and quick.. what glue do ypu used
Thanks Peter, usually use GLEXO hot glue
God’s hand !!
Hi can I ask you a question regarding the lights that you are using where would you recommend in the UK the best place to buy decent lights similar to the ones you were using from? Thank you Steve
Hi Steve thanks for your comment. The best people to speak to are Keco UK as they are the main PDR tool supplier in the UK. My lined board is called an Elim a Dent board and it’s a version 3
The long light is a PDR Pro Solutions, it’s an old one and there’s some really good alternatives for sale
Kecotools.co.uk
How do you set your camera up to see the dent but at the same time not interfere with your line of vision to fix the dent? Just play with adjusting it until you get it or what? May seem like a dumb question but I've been trying and having issues.
Hi Demetrius thank you for your comments, so it’s a bit tricky but I use a small tripod and either a go pro or my phone, set it up just infront of my face and then when I’m repairing I have to move around behind the camera looking for the best angle for repair.
I can send you pics of the set up when I next make a video if you like. I’m on Facebook if you want to find me there (Martin sadler)
Thanks Martin
Hi sir can i ask how long to repair hail damage on land cruiser??
Hi Raymond. Hail repairs are possible but to be able to determine a timeframe for the repair, a full estimate would need to be done, and from there a price and timescale would be given
Hope this helps
👍🔥💪
Thank you 🙌🏼
Is that a 20 inch board?
Yes Victor, it’s a version 3 20” Elim a dent. 6 strip led
🇮🇳👍🏻
Thank you
👏👏👏👏🤝👍
Thanks Tomáš