SUZUKI SAMURAI 400HP POWERED BY SUZUKI TWIN CAM G13B 1.3L ENGINE

[@porthos88]

Amazing engine! Very aggressive, love it:)!

[@Junior-ru1wd]

400 from 1.3 thats amazing work ❤

[@stuartcarter5414]

Ok
I got a G13 b making 300 whp
It takes a lot of work to make this power
I’m probably into 10,000$ into it
And that doesn’t include turbo or injectors or fuel system
It is reliable
But I try to keep the boost down to 18 psi
Look at Engine Swap Depot G13
Green Starlet Hillclimb car

[@micklaporta4503]

you are the turbo man, love your channel i am building an 87 tintop with a k04 ,nothing like this build but a far cry from stock

[@PaulvandenBraak]

That is awsome ❤❤❤ what a beast!!

[@alejandroaguilar3354]

Es increíble podrías pasar la lista de trabajo para llevar a ese motor a los 400hp y las piezas necesarias para llegar esos numeros mi abuelo tiene uno del mismo modelo y no se usa creo que si lo hago mostró mi papa no lo suelta mas gracias si pasas las listas

[@MrEddiedding]

I Had a stock g13b and need some help and advice. What i have to do to get 200 or 250 horsepower ? Can i use the Stock ecu ? Did i nee Arp head bolts. What Kind of Injektion nozzels and fuel Pump i need to Take ?
Your Car ist Just amazing that is amazing Here in Germany say everybody the g13b ist slow. I want Show them that they know nothig about This engine
Thank you for your work

[@tracydottin3461]

You need an aftermarket ecu, safer to go with head studs and bigger injectors with the turbo

[@benten1443]

I'm assuming that your car makes about 90 hp so from there, since its an N/A engine you wont get much benefit from ecu upgrade. To get a huge bump in hp all you can do is turbocharge it. Turbo it, custom ecu, upgraded clutch and transmission, upgraded suspension and exhaust. Basically it'll cost quite a bit.

[@realmoner]

Oye puede poner que modificaciones tiene ese twin cam para ese caballaje? Quiero turbar mi Swift.

[@saulespiritucruzbermudez7789]

Mi madre...

[@Muundax]

Una pregunta tuvieron que hacer alguna cosa para conectar la transmision original con ese motor o simplemente la pusieron y ya?

[@loudsilence1014]

M O O N D A creo que la tapa cae casi tira en el bloque de samurai, igual la tapa 1.6 single cam vitara o baleno

[@PipoZaro]

@@loudsilence1014 Este es el dato que andaba buscando, solo hay que buscar la culata del TC para elevar el caballaje de este bloque.
No pusieron nada forjado abajo, en el block..???
Saludos desde Copiapó, Chile

[@mrzmeraz1631]

@@PipoZaro pienso que deben de forjar Bielas y Pistones, lo que no se es que relación usan en los diferenciales y que turbo y a cuantas libras .......

[@anthonycoto9638]

What cams?

[@staboutcarzs6055]

Which turbo ?

[@joshstone423]

Hi great Suzuki very impressive, what engine do you use, and is it 4x4?

[@joshstone423]

What upgrades to get it to 400hp?

[@yamilracingvideo]

Josh Stone engine 1.3 liter twin cam suzuki G13B and yes, it’s 4x4

[@joshstone423]

Thank you for reply, Wow crazy power, take it everything else is uprated?

[@joshstone423]

Hi YAMILRACING, is the 4x4 system stock?

[@yamilracingvideo]

Josh Stone yes sir

[@guidoinvernizzi1795]

Pump gas or E85?

[@yamilracingvideo]

guido invernizzi VP Q16

[@xavierbenitez6606]

Muy bonito proyecto... Que transmisión usaron.??????

[@yamilracingvideo]

Xavier Benitez se usa su transmisión original suzuki

[@xavierbenitez6606]

Muchas gracias Saludos desde Panamá .. Muy buenos ustedes los P.R en lo que hacen

[@yamilracingvideo]

Gracias amigo y saludos a todos allá en Panamá

[@xavierbenitez6606]

@@yamilracingvideo muchas gracias.. Saludos desde Panamá.. Muy buenos ustedes los P.R en lo que hacen. DIOS lo bendiga

[@ramonortiz3095]

Eso viene siendo motor de susuki swift verdad?

[@miguelnovais2725]

Qual es el turbo?

[@etpromotions6115]

YamilRacing lovely video, Jeep is well put together sounds good with great power..... what ignition system are you using?

[@RaulSolisJr84]

Not a Jeep

[@shazanmohammed6763]

What transmission are you using?

[@yamilracingvideo]

*Shazi* Stock suzuki transmission

[@russgould707]

@@yamilracingvideo How do you get 180 mm clutch disc to handle that much power?

[@andremaduro1653]

@@russgould707 modify the pressure plate

[@palmpixel5911]

Does someone make a swap kit for this engine?

[@hewbambam]

I'm pretty sure that the g13b bolts straight up to the samurai gearbox. It's only the g16a, g16b and g16bb that need conversion kits. When the g13b is bolted in, just use the wiring loom from the swift or what ever you got the engine from.

[@bxtoyotero]

The Swift GTI twin cam crankshaft is forged from factory, bolts in samurai block, you can use Suzuki vitara 1.6 pistons, we have adapter plate for Honda d16z intake manifold, adapt Honda ignition distributor to Suzuki or go ecm cam trigger, with baleno 1.6 crank pulley

[@bxtoyotero]

Suzuki sidekick 16v head bolts to samurai 1.3 block

[@muftifaizan1964]

May I ask how you’d adapt the short intake cam that runs with distributor to work with the distributorless cam sensor setup . The length needs to extend for the cam to have trigger wheel to give input to the cam sensor that sits about 2-3 inches away from the intake cam

[@giuseppedilella592]

Salve chi può farmi questo motore?

[@yedhukrishnan3054]

G16b doesn't looks like this