Bro this is so damn easy thanks for this video gonna save me a grand in labor 👏 FYI for anyone doing this: WATCH YOUR BRAKE LINE be careful dont rip it
There are a couple ways to do that. Put a jack under the strut assembly. Be careful but you probably don't need much movement. You could also loosen the upper assembly at the top of the wheel well by loosening the nut and tapping on it to have the pieces separate. You can tighten it back up once it's all together including having the wheel on and the weight of the car. Good luck!
your the man no introduction just get to the point 👍 all these fake is250 car infuseist. your the real mechanic
Very straight forward! I used it as my guide to replace the whole assembly on both sides...thanks!
Your welcome
Can you also make a video of upper and lower ball joints replacement please?
Bro this is so damn easy thanks for this video gonna save me a grand in labor 👏
FYI for anyone doing this: WATCH YOUR BRAKE LINE be careful dont rip it
Also what drill were you using?
I use a 1/2 impact gun
You are welcome
Easy af thanks man
Excellent video 🙌🏾
I have a 2014 Lexus Is 250 base model rwd. Where can I buy front struts OEM? I was told not to buy cheap Oreilly struts 😩
I bought my online but they are after market I believe it was 1Auto so far so good for a very good price
Why take off the strut mount... Just take off the nut at the bottom and push down on the wheel assembly then you don't have to move outter tie rod
Have you actually done this? It does seem like that would be easier but is there room to get the assembly out?
How are the struts holding up? Thinking of getting the same ones
So far so good
How are the struts holding up? Thinking of getting the same ones
I have a AWD 2010 lexus is250 is the shocks/struts the same all AWD lexus
I’m pretty sure they are the same
Thanks for the video...my AWD lexus strut bolts threads are rusty from top side is it possible to change them? Or I need to change the full set?
I’m pretty sure you can change them. At least try
@@carvision4197 Thank u for ur prompt reply
Mine were super rusty and i was able to replace them just fine.
This is for the AWD model correct? Just want to make sure
Yes
@@carvision4197 thank you for the video, lowered my car today
@@ill.2ur your welcome
Hola quisiera saber que tan buenos son esos amortiguadores trq???? Ya mi lexus is250 necesita unos
La verdad si me salieron muy buenos el carro ya lleva buen rato con ellos hasta horita to bien
Muchas gracias comprare unos porq los demas amortiguadores que e visto y no son emsamblados estan carisimos gracis enserio
Would the process be any different for the rwd
It should be the same procedure.
I cannot get the bottom bolt to line up again. Been at it for over an hour. Is there anything you can do besides using pry bar?
There are a couple ways to do that. Put a jack under the strut assembly. Be careful but you probably don't need much movement. You could also loosen the upper assembly at the top of the wheel well by loosening the nut and tapping on it to have the pieces separate. You can tighten it back up once it's all together including having the wheel on and the weight of the car. Good luck!
how is the ride quality compare.to the old ones?
It's runs a lot better
@@carvision4197 thank you, i am installing my set next Saturday.
@@OMAR6575 your welcome. im glad I could help.
where did you get the struts? for the Awd?I have a lexus 250 2007 4x4
I got them online I believe it was on 1A auto parts
@@carvision4197 thank you, will check then? Did they end up being good quality?
@@JohnMaurofx so far so good
Amazing thank you!
I have those same rims on my IS 250
I think they look great
0:42
dirk-girl.com
I had those same rims they are trash all of them broke
Sorry to hear that. It hasn’t happened to me
Maybe you drive terribly. Because mine didn’t break and I’ve had them for a long time